Petzl ASAP Fall Arrest Kit K097BA0_

Petzl ASAP Fall Arrest Kit is pre-assembled and ready-to-use personal fall arrest systems. Meets OHSA fall protection regulations and the ANSI Z359.15 Safety Requirements for Single Anchor Lifelines and Fall Arresters standard only when used with RAY 11 (sold separately) lifelines. Each kit comes with a mobile fall arrester, energy absorber, and connectors.

The ASAP is a simple mobile fall arrester appropriate for use on sloped roofs, in swing stages, on ladders and on vertical structures.

The ASAP’SORBER energy absorbers may only be used with an ASAP mobile fall arrester. They allow the user to work at a distance from the rope, in order to protect it during certain work phases. Equipped with tear-webbing inside a pouch that opens on each end, the absorbers are protected from abrasion, while allowing for regular inspection.

The Bm’D is a lightweight asymmetrical carabiner made of aluminum. It is a D-shape connector with a TRIACT-LOCK automatic locking system. The sleeve is reinforced for greater front and lateral gate strength.

The CAPTIV positioning bar promotes loading of the carabiner on the major axis and limits the risk of rotation and keeps it well integrated with an ASAP’SORBER.

When installed on a lifeline, these mobile fall arresters follow the user as they move, whether on an inclined or vertical surface. In case of a shock load or sudden acceleration, they lock onto the lifeline and stop the worker, even if grabbed during the fall.

Key Features:

• Constant fall protection:
  • Arrests falls, slides, and uncontrolled descents
  • Works on vertical or angled rope
  • Locks on the rope even if grabbed during the fall
• Simple to use, and effective:
  • Moves up or down the rope, without any manual operation
  • Easy to install and remove at any point on the rope
• Energy absorber to work at a distance from the lifeline

For ANSI Z359.15 compliance, the vertical lifeline system must include:

• RAY 11 mm rope (sold separately)
• ASAP
• Bm’D with CAPTIV positioning bars (2)
• ASAP’SORBER (20cm, 40cm)

Part Numbers:
K097BA00 - ASAP 20 KIT (20cm)
K097BA01 - ASAP 40 KIT (40cm)