Allegro 5-Worker Carry-Air Filtration Panel 9875

Ships in 2 - 3 days
  • ALL02-9875-Product_Image_1
  • ALL02-9875-Product_Image_2
Allegro 5-Worker Carry-Air Filtration Panel 9875


Note: This item is Made to Order, cannot be exchanged and is non-returnable.

Up to 5 workers can use this air filtration panel to provide clean, breathable Grade D air for their airline respirators or hoods. The Allegro 9875 air filtration panel filters impurities and hydrocarbons from air produced by an internally lubricated compressor to convert it to breathable air. To meet OSHA requirements, a Carbon Monoxide (CO) monitor is provided for continuous monitoring of carbon monoxide levels. The capacity of this breather box is up to 60 CFM of air, adjustable at the regulator within a range of 5-125 PSI. Carbon Monoxide Calibration: This unit arrives uncalibrated. If you do not have CO calibration gas and a regulator, the Calibration Kit is highly recommended.With the typical job site in mind, Allegro put the guts in a portable, rugged Pelican case. Carrying handle with latches complete the protection package. Since the unit might tip over during operation, a 16 gauge powder coated steel stand is added for support. Inside, all brass plumbing combines with with quick-disconnect Hansen couplers to insure durability in use.

CO Monitor:

  • Power source: 115V AC to 9V DC power adapter for continuous power supply
  • 9V DC Alkaline battery (primary or as back-up for AC adapter)
  • Alarm Setting: 10 PPM (Canada: 5PPM)
  • External Connections: Optional Remote Strobe Light Alarm
  • Audible: 90 decibel Piezo Alarm
  • Visual: External power LED light signal
  • Sensor: Electrochemical, Replaceable Display: Liquid Crystal Keys:
  • Mode & Set Modes: Normal Operation, Peak, Battery Charge and Calibration mode
  • Calibration: Self adjusting calibration to 20 PPM CO

Filtration System:

  • First Stage: Zinc manifold, ABS Cover, Nylon bowl guard, Polycarbonate bowl, with a 5 micronSintered Polyethylene coalescing filter element and automatic mechanical drain
  • Second Stage: Zinc manifold, ABS Cover, Nylon bowl guard, Pressure indicator, Polycarbonate bowl with a 0.010 micron Borosilicate Cloth coalescing filter element and manual drain
  • Third Stage: Zinc manifold, ABS Cover, Nylon bowl guard, Pressure indicator, Polycarbonate bowl with a 0.003 micron activated carbon filter element and manual drain
  • Regulator: High Pressure, Zinc body, Acetal Adjusting knob, ABS Cover, Brass/Nitrile valve, a 0-160pressure gauge and an external relief valve
  • Flow Meter: Clear acrylic, Teflon float, with adjustable metering valve. Graduations from 0.0-1.0 LPM Related Products: Carry-Air Replacement Filters for 2- and 5-Worker Systems Carry-Air CO Calibration Kit Dimensions: 20.5L x 6.75W x 14.5H in.

Specification Sheet:

 Specification Sheet

Part Numbers:
9875 - 5-Worker Carry-Air Filtration Panel

9872-50 - Filtration Kit (Call Customer Service to inquire)
9872-60 - Calibration Kit

Related Searches
Airline Respirators, Respirators & Filters, Safety Equipment

View AllClose

Additional Information

Country of Origin:
United States
Safety Standard:
NIOSH requirements
24.00 LBS
15.00 (in)
14.00 (in)
23.00 (in)
View AllClose