WatchGas Docking Station with Hard Case SST-DOCK-KIT
Description
Calibration compliance falls apart at the last 20 miles.
The problem isn't the cal station in the shop. The problem is what happens when your monitors don't come back to it — because the crew is 100 miles out on a two-week turnaround, the job site is a truck-stage-only operation, or you're running a fleet across three facilities and there's only one calibration desk. Deadlines slip. Sensors drift silently. Audit logs get patched together from memory after the fact.
The WatchGas SST-DOCK-KIT is the docking station in a rugged hard case — designed to travel to the crew instead of waiting for the crew to come back.
Same touchscreen station as the desktop SST-DOCK. Same 60-second bump-and-cal cycle. Same automatic data logging with timestamps and gas readings. The difference is the hard case around it — molded fittings for two calibration gas cylinders and a demand-flow regulator, so the whole cal setup ships as one unit. Drop it in a service truck. Send it out to a job site with the crew. Rotate it between plants on a monthly schedule instead of buying a docking station for every site. The calibration schedule follows the monitors, and the compliance logs write themselves.
What's in the case:
- WatchGas
SST-DOCK Touchscreen docking station
- Rugged hard case with molded fittings for 2 cal gas cylinders + demand-flow regulator
- Up to 100 calibrations per battery charge
- Fleet-status touchscreen dashboard, optional WatchGas cloud connectivity, alerts for expirations / alarms / low test gas
- 2-year warranty
What is NOT included (order separately):
- Cal gas cylinders — spec depends on which SST monitors you're calibrating (H2S, CO, O2, NH3, LEL, or a 4-gas mix)
- WatchGas demand-flow regulator (DFR)
Call PK Safety at
800.829.9580 and we'll spec the right cylinders and DFR for your fleet before you order.
Why fleet managers pick the KIT over the desktop SST-DOCK:
- Compatible with the full WatchGas SST line (SST1 single-gas,
SST4 Micro,
SST4 Mini,
SST4 Pump, and SST5) — one kit calibrates a mixed-model fleet
- Ship between multi-facility operations on a rotation schedule — one kit does the work of several desktop stations
- Stage on a service truck for field cal on remote job sites — monitors don't have to travel back to a central desk
- Audit-ready compliance logs get written automatically at the point of calibration, not reconstructed later
- Same 60-second bump-and-cal cycle as the basic SST-DOCK — no separate training curve
PK Safety services the full WatchGas SST line with factory-trained technicians in-house. We also handle BW/Honeywell (Factory Authorized), RKI, and RAE Systems monitors — one shop for a mixed-brand fleet. If the docking station needs warranty support, if a monitor needs a sensor swap, or if you need help spec'ing the right cal gas and DFR for your fleet, call us at
800.829.9580. Someone who actually knows the SST platform and the calibration workflow will pick up.
This is right for you if:
- You run WatchGas SST monitors across dispersed job sites — turnarounds, service crews, contractor work, emergency response
- You manage a fleet across multiple facilities and don't want to buy a docking station for each location
- Your crews stage from service trucks and cal deadlines get missed because monitors don't come back to a central shop
- You need audit-ready compliance logs written at the point of calibration, not patched together from memory
- You've been tracking cal dates on spreadsheets or memory and it's not scaling with the fleet
Technical documents:
Brochure
Specification Sheet
Quick Start Guide
Manual
Part Number: SST-DOCK-KIT — SST Docking Station for SST1 / SST4 / SST4 Pumped, in Hard Case with Space for 2 Gas Cylinders and DFR
Frequently Asked Questions
What's the difference between the SST-DOCK-KIT and the desktop SST-DOCK?
Same touchscreen docking station. Same 60-second bump-and-cal cycle. Same automatic data logging. The difference is the hard case around it. The basic
SST-DOCK Touchscreen is designed to live on a workbench, mount to a wall, or sit next to the coffee pot in the shop — it's the right choice when calibration happens in one place. The SST-DOCK-KIT packages that same station inside a rugged hard case with molded fittings for two cal gas cylinders and a demand-flow regulator, so the whole cal setup ships as one unit.
Choose the KIT if calibration needs to travel — service trucks, remote job sites, or rotating between multi-facility operations. Choose the basic SST-DOCK if calibration lives in one location. Both handle the full WatchGas SST fleet identically. Call 800.829.9580 if you're unsure which fits your fleet.
What comes in the SST-DOCK-KIT?
The SST-DOCK Touchscreen docking station and the rugged hard case with molded fittings for two calibration gas cylinders and a demand-flow regulator (DFR).
Cal gas cylinders and the DFR are ordered separately — they are gas-specific to the monitors you're calibrating. A single-gas SST1 fleet calibrated to H2S needs a different cylinder than an SST4 multi-gas fleet calibrated to a 4-gas mix. Call 800.829.9580 with your monitor list and we'll spec the cylinders and regulator that fit before you order.
Which WatchGas monitors does the SST-DOCK-KIT work with?
The full WatchGas SST line —
SST1 single-gas monitors (H2S, CO, O2, NH3, and other gas variants),
SST4 Micro,
SST4 Mini,
SST4 Pump, and SST5. One docking station handles a mixed-model fleet — you don't need a separate cal setup for each SST model.
How does the SST-DOCK-KIT support multi-site fleet management?
Two patterns show up most often. The first is
ship-between-locations: one kit rotates across facilities on a monthly or quarterly schedule so you're not buying a docking station for every site. The second is
field-deployable: the kit stages on a service truck or ships out to a job site with the crew, so cal deadlines don't wait for monitors to return to a central shop.
When the kit is connected to WatchGas cloud software, the fleet-status dashboard travels with it — expiration alerts, calibration history, alarm logs, and low-test-gas warnings are visible from a phone or laptop regardless of which site the kit is currently plugged in at.
What cal gas cylinders and demand-flow regulator do I need with the kit?
The cal gas depends on which SST monitors you're calibrating and which gases they read. As a rule of thumb: single-gas SST1 monitors need a cylinder that matches the target gas (H2S, CO, O2, NH3, LEL, etc.); multi-gas SST4 monitors typically use a 4-gas calibration mix (usually H2S / CO / O2 / LEL combined). The
WatchGas demand-flow regulator matches the cylinder valve and controls flow into the docking station.
Call PK Safety at 800.829.9580 with your monitor list and we'll spec the right cylinders and DFR for your fleet before you order. Getting this right up front saves shipping the wrong cylinders back and re-ordering.
How does PK Safety support the SST-DOCK-KIT after purchase?
PK Safety carries the full WatchGas SST line and services the platform with factory-trained technicians in-house. That covers monitor calibration, sensor replacement, firmware updates, docking station warranty support, and cal-workflow setup questions.
We also handle BW/Honeywell (Factory Authorized), RKI, and RAE Systems monitors under the same roof — one shop for a mixed-brand fleet. Call
800.829.9580 with any calibration workflow, fleet setup, or spec questions. A person who knows the SST platform will pick up.
Not sure whether the SST-DOCK-KIT or the desktop SST-DOCK fits your operation? Call PK Safety at 800.829.9580. Someone who knows the WatchGas SST platform and the calibration workflow will pick up.
Read more
Description
Calibration compliance falls apart at the last 20 miles.
The problem isn't the cal station in the shop. The problem is what happens when your monitors don't come back to it — because the crew is 100 miles out on a two-week turnaround, the job site is a truck-stage-only operation, or you're running a fleet across three facilities and there's only one calibration desk. Deadlines slip. Sensors drift silently. Audit logs get patched together from memory after the fact.
The WatchGas SST-DOCK-KIT is the docking station in a rugged hard case — designed to travel to the crew instead of waiting for the crew to come back.
Same touchscreen station as the desktop SST-DOCK. Same 60-second bump-and-cal cycle. Same automatic data logging with timestamps and gas readings. The difference is the hard case around it — molded fittings for two calibration gas cylinders and a demand-flow regulator, so the whole cal setup ships as one unit. Drop it in a service truck. Send it out to a job site with the crew. Rotate it between plants on a monthly schedule instead of buying a docking station for every site. The calibration schedule follows the monitors, and the compliance logs write themselves.
What's in the case:
- WatchGas SST-DOCK Touchscreen docking station
- Rugged hard case with molded fittings for 2 cal gas cylinders + demand-flow regulator
- Up to 100 calibrations per battery charge
- Fleet-status touchscreen dashboard, optional WatchGas cloud connectivity, alerts for expirations / alarms / low test gas
- 2-year warranty
What is NOT included (order separately):
- Cal gas cylinders — spec depends on which SST monitors you're calibrating (H2S, CO, O2, NH3, LEL, or a 4-gas mix)
- WatchGas demand-flow regulator (DFR)
Call PK Safety at 800.829.9580 and we'll spec the right cylinders and DFR for your fleet before you order.
Why fleet managers pick the KIT over the desktop SST-DOCK:
- Compatible with the full WatchGas SST line (SST1 single-gas, SST4 Micro, SST4 Mini, SST4 Pump, and SST5) — one kit calibrates a mixed-model fleet
- Ship between multi-facility operations on a rotation schedule — one kit does the work of several desktop stations
- Stage on a service truck for field cal on remote job sites — monitors don't have to travel back to a central desk
- Audit-ready compliance logs get written automatically at the point of calibration, not reconstructed later
- Same 60-second bump-and-cal cycle as the basic SST-DOCK — no separate training curve
PK Safety services the full WatchGas SST line with factory-trained technicians in-house. We also handle BW/Honeywell (Factory Authorized), RKI, and RAE Systems monitors — one shop for a mixed-brand fleet. If the docking station needs warranty support, if a monitor needs a sensor swap, or if you need help spec'ing the right cal gas and DFR for your fleet, call us at 800.829.9580. Someone who actually knows the SST platform and the calibration workflow will pick up.
This is right for you if:
- You run WatchGas SST monitors across dispersed job sites — turnarounds, service crews, contractor work, emergency response
- You manage a fleet across multiple facilities and don't want to buy a docking station for each location
- Your crews stage from service trucks and cal deadlines get missed because monitors don't come back to a central shop
- You need audit-ready compliance logs written at the point of calibration, not patched together from memory
- You've been tracking cal dates on spreadsheets or memory and it's not scaling with the fleet
Technical documents:
Brochure
Specification Sheet
Quick Start Guide
Manual
Part Number: SST-DOCK-KIT — SST Docking Station for SST1 / SST4 / SST4 Pumped, in Hard Case with Space for 2 Gas Cylinders and DFR
Frequently Asked Questions
What's the difference between the SST-DOCK-KIT and the desktop SST-DOCK?
Same touchscreen docking station. Same 60-second bump-and-cal cycle. Same automatic data logging. The difference is the hard case around it. The basic SST-DOCK Touchscreen is designed to live on a workbench, mount to a wall, or sit next to the coffee pot in the shop — it's the right choice when calibration happens in one place. The SST-DOCK-KIT packages that same station inside a rugged hard case with molded fittings for two cal gas cylinders and a demand-flow regulator, so the whole cal setup ships as one unit.
Choose the KIT if calibration needs to travel — service trucks, remote job sites, or rotating between multi-facility operations. Choose the basic SST-DOCK if calibration lives in one location. Both handle the full WatchGas SST fleet identically. Call 800.829.9580 if you're unsure which fits your fleet.
What comes in the SST-DOCK-KIT?
The SST-DOCK Touchscreen docking station and the rugged hard case with molded fittings for two calibration gas cylinders and a demand-flow regulator (DFR).
Cal gas cylinders and the DFR are ordered separately — they are gas-specific to the monitors you're calibrating. A single-gas SST1 fleet calibrated to H2S needs a different cylinder than an SST4 multi-gas fleet calibrated to a 4-gas mix. Call 800.829.9580 with your monitor list and we'll spec the cylinders and regulator that fit before you order.
Which WatchGas monitors does the SST-DOCK-KIT work with?
The full WatchGas SST line — SST1 single-gas monitors (H2S, CO, O2, NH3, and other gas variants), SST4 Micro, SST4 Mini, SST4 Pump, and SST5. One docking station handles a mixed-model fleet — you don't need a separate cal setup for each SST model.
How does the SST-DOCK-KIT support multi-site fleet management?
Two patterns show up most often. The first is ship-between-locations: one kit rotates across facilities on a monthly or quarterly schedule so you're not buying a docking station for every site. The second is field-deployable: the kit stages on a service truck or ships out to a job site with the crew, so cal deadlines don't wait for monitors to return to a central shop.
When the kit is connected to WatchGas cloud software, the fleet-status dashboard travels with it — expiration alerts, calibration history, alarm logs, and low-test-gas warnings are visible from a phone or laptop regardless of which site the kit is currently plugged in at.
What cal gas cylinders and demand-flow regulator do I need with the kit?
The cal gas depends on which SST monitors you're calibrating and which gases they read. As a rule of thumb: single-gas SST1 monitors need a cylinder that matches the target gas (H2S, CO, O2, NH3, LEL, etc.); multi-gas SST4 monitors typically use a 4-gas calibration mix (usually H2S / CO / O2 / LEL combined). The WatchGas demand-flow regulator matches the cylinder valve and controls flow into the docking station.
Call PK Safety at 800.829.9580 with your monitor list and we'll spec the right cylinders and DFR for your fleet before you order. Getting this right up front saves shipping the wrong cylinders back and re-ordering.
How does PK Safety support the SST-DOCK-KIT after purchase?
PK Safety carries the full WatchGas SST line and services the platform with factory-trained technicians in-house. That covers monitor calibration, sensor replacement, firmware updates, docking station warranty support, and cal-workflow setup questions.
We also handle BW/Honeywell (Factory Authorized), RKI, and RAE Systems monitors under the same roof — one shop for a mixed-brand fleet. Call 800.829.9580 with any calibration workflow, fleet setup, or spec questions. A person who knows the SST platform will pick up.
Not sure whether the SST-DOCK-KIT or the desktop SST-DOCK fits your operation? Call PK Safety at 800.829.9580. Someone who knows the WatchGas SST platform and the calibration workflow will pick up.
Calibration compliance falls apart at the last 20 miles.
The problem isn't the cal station in the shop. The problem is what happens when your monitors don't come back to it — because the crew is 100 miles out on a two-week turnaround, the job site is a truck-stage-only operation, or you're running a fleet across three facilities and there's only one calibration desk. Deadlines slip. Sensors drift silently. Audit logs get patched together from memory after the fact.
The WatchGas SST-DOCK-KIT is the docking station in a rugged hard case — designed to travel to the crew instead of waiting for the crew to come back.
Same touchscreen station as the desktop SST-DOCK. Same 60-second bump-and-cal cycle. Same automatic data logging with timestamps and gas readings. The difference is the hard case around it — molded fittings for two calibration gas cylinders and a demand-flow regulator, so the whole cal setup ships as one unit. Drop it in a service truck. Send it out to a job site with the crew. Rotate it between plants on a monthly schedule instead of buying a docking station for every site. The calibration schedule follows the monitors, and the compliance logs write themselves.
What's in the case:
- WatchGas SST-DOCK Touchscreen docking station
- Rugged hard case with molded fittings for 2 cal gas cylinders + demand-flow regulator
- Up to 100 calibrations per battery charge
- Fleet-status touchscreen dashboard, optional WatchGas cloud connectivity, alerts for expirations / alarms / low test gas
- 2-year warranty
What is NOT included (order separately):
- Cal gas cylinders — spec depends on which SST monitors you're calibrating (H2S, CO, O2, NH3, LEL, or a 4-gas mix)
- WatchGas demand-flow regulator (DFR)
Call PK Safety at 800.829.9580 and we'll spec the right cylinders and DFR for your fleet before you order.
Why fleet managers pick the KIT over the desktop SST-DOCK:
- Compatible with the full WatchGas SST line (SST1 single-gas, SST4 Micro, SST4 Mini, SST4 Pump, and SST5) — one kit calibrates a mixed-model fleet
- Ship between multi-facility operations on a rotation schedule — one kit does the work of several desktop stations
- Stage on a service truck for field cal on remote job sites — monitors don't have to travel back to a central desk
- Audit-ready compliance logs get written automatically at the point of calibration, not reconstructed later
- Same 60-second bump-and-cal cycle as the basic SST-DOCK — no separate training curve
PK Safety services the full WatchGas SST line with factory-trained technicians in-house. We also handle BW/Honeywell (Factory Authorized), RKI, and RAE Systems monitors — one shop for a mixed-brand fleet. If the docking station needs warranty support, if a monitor needs a sensor swap, or if you need help spec'ing the right cal gas and DFR for your fleet, call us at 800.829.9580. Someone who actually knows the SST platform and the calibration workflow will pick up.
This is right for you if:
- You run WatchGas SST monitors across dispersed job sites — turnarounds, service crews, contractor work, emergency response
- You manage a fleet across multiple facilities and don't want to buy a docking station for each location
- Your crews stage from service trucks and cal deadlines get missed because monitors don't come back to a central shop
- You need audit-ready compliance logs written at the point of calibration, not patched together from memory
- You've been tracking cal dates on spreadsheets or memory and it's not scaling with the fleet
Technical documents:
Brochure
Specification Sheet
Quick Start Guide
Manual
Part Number: SST-DOCK-KIT — SST Docking Station for SST1 / SST4 / SST4 Pumped, in Hard Case with Space for 2 Gas Cylinders and DFR
Frequently Asked Questions
What's the difference between the SST-DOCK-KIT and the desktop SST-DOCK?
Same touchscreen docking station. Same 60-second bump-and-cal cycle. Same automatic data logging. The difference is the hard case around it. The basic SST-DOCK Touchscreen is designed to live on a workbench, mount to a wall, or sit next to the coffee pot in the shop — it's the right choice when calibration happens in one place. The SST-DOCK-KIT packages that same station inside a rugged hard case with molded fittings for two cal gas cylinders and a demand-flow regulator, so the whole cal setup ships as one unit.
Choose the KIT if calibration needs to travel — service trucks, remote job sites, or rotating between multi-facility operations. Choose the basic SST-DOCK if calibration lives in one location. Both handle the full WatchGas SST fleet identically. Call 800.829.9580 if you're unsure which fits your fleet.
What comes in the SST-DOCK-KIT?
The SST-DOCK Touchscreen docking station and the rugged hard case with molded fittings for two calibration gas cylinders and a demand-flow regulator (DFR).
Cal gas cylinders and the DFR are ordered separately — they are gas-specific to the monitors you're calibrating. A single-gas SST1 fleet calibrated to H2S needs a different cylinder than an SST4 multi-gas fleet calibrated to a 4-gas mix. Call 800.829.9580 with your monitor list and we'll spec the cylinders and regulator that fit before you order.
Which WatchGas monitors does the SST-DOCK-KIT work with?
The full WatchGas SST line — SST1 single-gas monitors (H2S, CO, O2, NH3, and other gas variants), SST4 Micro, SST4 Mini, SST4 Pump, and SST5. One docking station handles a mixed-model fleet — you don't need a separate cal setup for each SST model.
How does the SST-DOCK-KIT support multi-site fleet management?
Two patterns show up most often. The first is ship-between-locations: one kit rotates across facilities on a monthly or quarterly schedule so you're not buying a docking station for every site. The second is field-deployable: the kit stages on a service truck or ships out to a job site with the crew, so cal deadlines don't wait for monitors to return to a central shop.
When the kit is connected to WatchGas cloud software, the fleet-status dashboard travels with it — expiration alerts, calibration history, alarm logs, and low-test-gas warnings are visible from a phone or laptop regardless of which site the kit is currently plugged in at.
What cal gas cylinders and demand-flow regulator do I need with the kit?
The cal gas depends on which SST monitors you're calibrating and which gases they read. As a rule of thumb: single-gas SST1 monitors need a cylinder that matches the target gas (H2S, CO, O2, NH3, LEL, etc.); multi-gas SST4 monitors typically use a 4-gas calibration mix (usually H2S / CO / O2 / LEL combined). The WatchGas demand-flow regulator matches the cylinder valve and controls flow into the docking station.
Call PK Safety at 800.829.9580 with your monitor list and we'll spec the right cylinders and DFR for your fleet before you order. Getting this right up front saves shipping the wrong cylinders back and re-ordering.
How does PK Safety support the SST-DOCK-KIT after purchase?
PK Safety carries the full WatchGas SST line and services the platform with factory-trained technicians in-house. That covers monitor calibration, sensor replacement, firmware updates, docking station warranty support, and cal-workflow setup questions.
We also handle BW/Honeywell (Factory Authorized), RKI, and RAE Systems monitors under the same roof — one shop for a mixed-brand fleet. Call 800.829.9580 with any calibration workflow, fleet setup, or spec questions. A person who knows the SST platform will pick up.
Not sure whether the SST-DOCK-KIT or the desktop SST-DOCK fits your operation? Call PK Safety at 800.829.9580. Someone who knows the WatchGas SST platform and the calibration workflow will pick up.
Specifications
Specifications
-
MPN
-
Product Weight (lbs.)
-
Height (in.)
-
Length (in.)
-
Width (in.)
-
Country of Origin
-
Warranty Info
Reviews
Reviews
Keep your team protected & compliant!
- Expert guidance tailored to your specific needs
- Access responsive customer support when you need it
- Enjoy fast shipping directly to your location
- Benefit from extensive industry knowledge—75+ years of experience
- In-house gas detection calibration & repair services available
