WatchGas Docking Station w/Touchscreen SST-DOCK
Description
Keeping gas monitors calibrated and inspection-ready gets harder as your fleet grows.
Manual calibration schedules break down the moment monitors leave the shop. A sensor drifts and nobody notices. A unit gets dropped and doesn't get reported. Compliance records lag. The audit questions get harder — and somebody has to answer them.
The WatchGas SST-DOCK Touchscreen closes the gap between what you know about your fleet and what's actually happening in the field.
Plug any WatchGas SST-series monitor into the docking station. In roughly 60 seconds, it runs a bump test, calibrates if needed, logs the result with timestamp and gas readings, and displays fleet-wide status on the touchscreen — which units are current, which are due, which failed. Connect it to WatchGas cloud software and the same picture is available from your phone, with alerts for expirations, alarms, and low test gas.
It's the closest thing in gas detection to a monitor that keeps its own calibration schedule.
Why safety managers put this next to their coffee pot:
- Bump test + calibration in about 60 seconds per unit
- Automatic data logging — compliance records without spreadsheets
- Compatible with the full WatchGas SST line (SST1,
SST4 Micro,
SST4 Mini,
SST4 Pump, and SST5)
- Touchscreen fleet dashboard + optional cloud connectivity for remote visibility
- Up to 100 calibrations per battery charge — portable, desk, or wall mount
- Alerts for expirations, alarms, and low test gas
- 2-year warranty
PK Safety services the full WatchGas SST line with factory-trained technicians in-house. We also handle BW/Honeywell (Factory Authorized), RKI, and RAE Systems monitors — one shop for a mixed fleet. If a unit needs service, send it to us — you're not shipping equipment into a black box. Call us at
800.829.9580 to talk through your fleet setup with someone who actually understands the SST line and the calibration workflow.
This is right for you if:
- You run a WatchGas SST fleet across job sites, trucks, or remote crews
- You've been tracking calibration dates on spreadsheets, whiteboards, or memory
- You need audit-ready compliance logs without hiring a dedicated cal-tech
- You want alerts for what's expiring before it expires
Technical documents:
Brochure
Specification Sheet
Quick Start Guide
Manual
Part Number: SST-Dock — SST Docking Station for SST1 / SST4 / SST4 Pumped, Touch Screen
Frequently Asked Questions
What is the WatchGas SST-DOCK docking station?
The WatchGas SST-DOCK is a touchscreen docking station that automates bump testing, calibration, and data logging for the WatchGas SST monitor line. Plug in an SST1, SST4 Micro, SST4 Mini, SST4 Pump, or SST5 monitor and the station runs a full test cycle in about 60 seconds, logs the result with timestamp and gas readings, and shows fleet-wide status on the touchscreen.
How long does one calibration cycle take?
About 60 seconds per unit. The station runs the bump test, calibrates if drift is detected, and logs the result with a timestamp and gas readings — all in a single cycle.
Which WatchGas monitors does the SST-DOCK work with?
The SST-DOCK is compatible with the full WatchGas SST line: SST1 single-gas monitors, SST4 Micro, SST4 Mini, SST4 Pump, and SST5 multi-gas monitors. One docking station covers the entire fleet.
Does the SST-DOCK connect to cloud software?
Yes. When connected to WatchGas cloud software, the SST-DOCK's calibration logs, expiration dates, alarm history, and low-test-gas alerts are available from a phone or laptop for remote fleet visibility.
How does PK Safety support the WatchGas SST-DOCK?
PK Safety carries the full WatchGas SST line and can walk you through fleet setup, calibration workflow, and cloud connectivity. Call 800.829.9580 to talk with someone who knows the SST line.
Not sure this is the right fit? Call PK Safety at 800.829.9580. A person who knows the SST line will pick up.
Read more
Description
Keeping gas monitors calibrated and inspection-ready gets harder as your fleet grows.
Manual calibration schedules break down the moment monitors leave the shop. A sensor drifts and nobody notices. A unit gets dropped and doesn't get reported. Compliance records lag. The audit questions get harder — and somebody has to answer them.
The WatchGas SST-DOCK Touchscreen closes the gap between what you know about your fleet and what's actually happening in the field.
Plug any WatchGas SST-series monitor into the docking station. In roughly 60 seconds, it runs a bump test, calibrates if needed, logs the result with timestamp and gas readings, and displays fleet-wide status on the touchscreen — which units are current, which are due, which failed. Connect it to WatchGas cloud software and the same picture is available from your phone, with alerts for expirations, alarms, and low test gas.
It's the closest thing in gas detection to a monitor that keeps its own calibration schedule.
Why safety managers put this next to their coffee pot:
- Bump test + calibration in about 60 seconds per unit
- Automatic data logging — compliance records without spreadsheets
- Compatible with the full WatchGas SST line (SST1, SST4 Micro, SST4 Mini, SST4 Pump, and SST5)
- Touchscreen fleet dashboard + optional cloud connectivity for remote visibility
- Up to 100 calibrations per battery charge — portable, desk, or wall mount
- Alerts for expirations, alarms, and low test gas
- 2-year warranty
PK Safety services the full WatchGas SST line with factory-trained technicians in-house. We also handle BW/Honeywell (Factory Authorized), RKI, and RAE Systems monitors — one shop for a mixed fleet. If a unit needs service, send it to us — you're not shipping equipment into a black box. Call us at 800.829.9580 to talk through your fleet setup with someone who actually understands the SST line and the calibration workflow.
This is right for you if:
- You run a WatchGas SST fleet across job sites, trucks, or remote crews
- You've been tracking calibration dates on spreadsheets, whiteboards, or memory
- You need audit-ready compliance logs without hiring a dedicated cal-tech
- You want alerts for what's expiring before it expires
Technical documents:
Brochure
Specification Sheet
Quick Start Guide
Manual
Part Number: SST-Dock — SST Docking Station for SST1 / SST4 / SST4 Pumped, Touch Screen
Frequently Asked Questions
What is the WatchGas SST-DOCK docking station?
The WatchGas SST-DOCK is a touchscreen docking station that automates bump testing, calibration, and data logging for the WatchGas SST monitor line. Plug in an SST1, SST4 Micro, SST4 Mini, SST4 Pump, or SST5 monitor and the station runs a full test cycle in about 60 seconds, logs the result with timestamp and gas readings, and shows fleet-wide status on the touchscreen.
How long does one calibration cycle take?
About 60 seconds per unit. The station runs the bump test, calibrates if drift is detected, and logs the result with a timestamp and gas readings — all in a single cycle.
Which WatchGas monitors does the SST-DOCK work with?
The SST-DOCK is compatible with the full WatchGas SST line: SST1 single-gas monitors, SST4 Micro, SST4 Mini, SST4 Pump, and SST5 multi-gas monitors. One docking station covers the entire fleet.
Does the SST-DOCK connect to cloud software?
Yes. When connected to WatchGas cloud software, the SST-DOCK's calibration logs, expiration dates, alarm history, and low-test-gas alerts are available from a phone or laptop for remote fleet visibility.
How does PK Safety support the WatchGas SST-DOCK?
PK Safety carries the full WatchGas SST line and can walk you through fleet setup, calibration workflow, and cloud connectivity. Call 800.829.9580 to talk with someone who knows the SST line.
Not sure this is the right fit? Call PK Safety at 800.829.9580. A person who knows the SST line will pick up.
Keeping gas monitors calibrated and inspection-ready gets harder as your fleet grows.
Manual calibration schedules break down the moment monitors leave the shop. A sensor drifts and nobody notices. A unit gets dropped and doesn't get reported. Compliance records lag. The audit questions get harder — and somebody has to answer them.
The WatchGas SST-DOCK Touchscreen closes the gap between what you know about your fleet and what's actually happening in the field.
Plug any WatchGas SST-series monitor into the docking station. In roughly 60 seconds, it runs a bump test, calibrates if needed, logs the result with timestamp and gas readings, and displays fleet-wide status on the touchscreen — which units are current, which are due, which failed. Connect it to WatchGas cloud software and the same picture is available from your phone, with alerts for expirations, alarms, and low test gas.
It's the closest thing in gas detection to a monitor that keeps its own calibration schedule.
Why safety managers put this next to their coffee pot:
- Bump test + calibration in about 60 seconds per unit
- Automatic data logging — compliance records without spreadsheets
- Compatible with the full WatchGas SST line (SST1, SST4 Micro, SST4 Mini, SST4 Pump, and SST5)
- Touchscreen fleet dashboard + optional cloud connectivity for remote visibility
- Up to 100 calibrations per battery charge — portable, desk, or wall mount
- Alerts for expirations, alarms, and low test gas
- 2-year warranty
PK Safety services the full WatchGas SST line with factory-trained technicians in-house. We also handle BW/Honeywell (Factory Authorized), RKI, and RAE Systems monitors — one shop for a mixed fleet. If a unit needs service, send it to us — you're not shipping equipment into a black box. Call us at 800.829.9580 to talk through your fleet setup with someone who actually understands the SST line and the calibration workflow.
This is right for you if:
- You run a WatchGas SST fleet across job sites, trucks, or remote crews
- You've been tracking calibration dates on spreadsheets, whiteboards, or memory
- You need audit-ready compliance logs without hiring a dedicated cal-tech
- You want alerts for what's expiring before it expires
Technical documents:
Brochure
Specification Sheet
Quick Start Guide
Manual
Part Number: SST-Dock — SST Docking Station for SST1 / SST4 / SST4 Pumped, Touch Screen
Frequently Asked Questions
What is the WatchGas SST-DOCK docking station?
The WatchGas SST-DOCK is a touchscreen docking station that automates bump testing, calibration, and data logging for the WatchGas SST monitor line. Plug in an SST1, SST4 Micro, SST4 Mini, SST4 Pump, or SST5 monitor and the station runs a full test cycle in about 60 seconds, logs the result with timestamp and gas readings, and shows fleet-wide status on the touchscreen.
How long does one calibration cycle take?
About 60 seconds per unit. The station runs the bump test, calibrates if drift is detected, and logs the result with a timestamp and gas readings — all in a single cycle.
Which WatchGas monitors does the SST-DOCK work with?
The SST-DOCK is compatible with the full WatchGas SST line: SST1 single-gas monitors, SST4 Micro, SST4 Mini, SST4 Pump, and SST5 multi-gas monitors. One docking station covers the entire fleet.
Does the SST-DOCK connect to cloud software?
Yes. When connected to WatchGas cloud software, the SST-DOCK's calibration logs, expiration dates, alarm history, and low-test-gas alerts are available from a phone or laptop for remote fleet visibility.
How does PK Safety support the WatchGas SST-DOCK?
PK Safety carries the full WatchGas SST line and can walk you through fleet setup, calibration workflow, and cloud connectivity. Call 800.829.9580 to talk with someone who knows the SST line.
Not sure this is the right fit? Call PK Safety at 800.829.9580. A person who knows the SST line will pick up.
Specifications
Specifications
-
MPN
-
Product Weight (lbs.)
-
Height (in.)
-
Length (in.)
-
Width (in.)
-
Country of Origin
-
Warranty Info
Reviews
Reviews
Keep your team protected & compliant!
- Expert guidance tailored to your specific needs
- Access responsive customer support when you need it
- Enjoy fast shipping directly to your location
- Benefit from extensive industry knowledge—75+ years of experience
- In-house gas detection calibration & repair services available
