BW Clip 3 Year CO Single Gas Detector BWC3-M
Description
The BW Clip 3-Year Detector CO 35ppm–200ppm is a maintenance-free, single gas detector. As your every day companion for hazardous environments, the BW Clip has everything you need — plus new features to make your gas detection easier, safer, and more reliable. It operates up to three years: just turn on the device and it runs continuously — no need for calibration, sensor replacement, battery replacement or battery charging. That means great reliability and no downtime.
Compatible with both the MicroDock II and the new IntelliDoX instrument management systems, the BW Clip is engineered to the highest standards of quality and reliability, keeping you safe and compliant.
Use the hands-free Hard Hat Clip carrying accessory GA-HC-1 with any of the BW single gas monitors. Add on the CO Bump Alarm Test Gas to regularly test the monitor is functioning properly.
BW Clip Standard Features:
- Maintenance-free: no sensor or battery changes necessary
- Compact, lightweight design with one-button operation
- Designed for a range of harsh environments and extreme temperatures
- Automated self-test of battery, sensor and electronics
- Wide-angle flash, which alerts simultaneously with audible and vibrating alarm
- Automatic logging of the 35 most recent gas events and bump test results
- IP 66/67 — can be submerged up to 1 meter
- Extended event log — up to 35 events
- Automated self-test
- Affordable, with low cost of ownership
- 3-year maintenance free
Unit Includes:
- Detector complete with specified sensor, stainless steel alligator clip and concussion-proof housing
- Calibration/test cap and hose
- Manual
Configurable Options with the IntelliDoX Management System:
- Configuration of high and low alarm setpoints before the device is activated
- Adjustment of alarm setpoints and other parameters as needed throughout the lifespan
- Non-compliance chirp indicator
- Configuration without activation
- Option to enable the noncompliance indicator, which flashes red when a bump test is due or a gas event occurs
- Option to display gas reading during alarm
- User settable bump test reminder
- 7–8 sec Bump test with no more than 1 minute purge
- Option to display the Real Time Clock
Advanced Technology for Safety Compliance and Productivity:
- Unique dual reservoir sensor design dramatically improves instrument performance, response time, and longevity compared to traditional electrochemical sensors and consistently delivers reliable instrument performance under the harshest environmental conditions
- Reflex Technology advanced automated self-test function routinely checks the operating condition of the sensor to increase safety, up-time, and overall worker confidence
IntelliDoX instrument management system is the quickest bump test in the industry with configuration of alarm setpoints. It can perform different tests for up to five BW Clip detectors at once for maximum productivity with easy and accurate record-keeping.
BW Clip Specifications:
- Weight: 0.6 lbs.
- Temperature: CO, -22 to 122°F
- Humidity: 5–95% RH (non-condensing)
- Alarms: Visual, vibrating, and audible
- Typical Battery Life: 3 years
Regulatory Note: The OSHA PEL for CO is 50 ppm (29 CFR 1910.1000, Table Z-1). The BWC3-M default setpoints (35 ppm low / 200 ppm high) provide compliance support; employers must verify all applicable regulatory limits. See 29 CFR 1910.146 for confined space requirements.
Please Note: MM and DD denote the number of months and days left before the gas monitor expires. This monitor does not have a digital display of the gas concentration. Once activated, these units cannot be shut down and will continue to run for their three-year life span, prohibiting these items from being shipped because the alarm may be activated during transit. Additionally, these items are unable to be resold after activation.
Part Number:
BWC3-M 3 Year CO 35-200
PK Safety services BW Technologies by Honeywell gas monitors in-house with factory-trained technicians. For help selecting the right part or to schedule calibration and repair, call 800.829.9580 or contact us online.
Related Searches
Bw Technologies By Honeywell, Co Gas Monitors, Gas Detection
Frequently Asked Questions
How does the BWC3-M differ from the 2-year BW Clip CO (BWC2-M)?
The BWC3-M operates for three years without maintenance compared to two years for the BWC2-M. The 3-year model is also fully compatible with the IntelliDoX docking station for automated bump testing and alarm setpoint configuration throughout its longer lifespan, offering a lower total cost of ownership for high-volume fleets.
Does the BWC3-M require calibration or sensor replacement?
No. The BWC3-M is fully maintenance-free for three years. No calibration, sensor replacement, or battery changes are required. Reflex Technology automated self-tests continuously verify sensor and battery condition. Regular bump testing is recommended to confirm alarm response; use the included test cap with an appropriate CO bump gas.
What CO alarm setpoints does the BWC3-M use?
The BWC3-M ships with default low alarm at 35 ppm and high alarm at 200 ppm. Using the BW IntelliDoX DX-CLIP, setpoints can be reconfigured before or after activation. The OSHA PEL for CO is 50 ppm (29 CFR 1910.1000, Table Z-1); employers should confirm setpoints meet applicable regulatory requirements.
Does the BWC3-M work with IntelliDoX?
Yes. The BWC3-M is compatible with the BW IntelliDoX DX-CLIP, which enables FastBump testing (10 seconds for up to 5 units simultaneously), setpoint configuration, compliance record-keeping, and event log transfer. The IntelliDoX Enabler Kit DX-ENBL-NA is required.
Is a hibernation case available for the BWC3-M?
Yes. The BW Clip Hibernation Case CLIPHB-CASE is compatible with the BWC3-M. When the monitor is idle for a week or more, storing it in the hibernation case pauses the device clock, potentially extending usable life beyond three years.
What accessories does PK Safety recommend for the BWC3-M?
Recommended accessories include the Hard Hat Clip GA-HC-1, the Hibernation Case CLIPHB-CASE, the IntelliDoX DX-CLIP for fleet management, and the CO Bump Alarm Test Gas. Call PK Safety at 800.829.9580 for fleet pricing and configuration support.
Read more
Description
The BW Clip 3-Year Detector CO 35ppm–200ppm is a maintenance-free, single gas detector. As your every day companion for hazardous environments, the BW Clip has everything you need — plus new features to make your gas detection easier, safer, and more reliable. It operates up to three years: just turn on the device and it runs continuously — no need for calibration, sensor replacement, battery replacement or battery charging. That means great reliability and no downtime.
Compatible with both the MicroDock II and the new IntelliDoX instrument management systems, the BW Clip is engineered to the highest standards of quality and reliability, keeping you safe and compliant.
Use the hands-free Hard Hat Clip carrying accessory GA-HC-1 with any of the BW single gas monitors. Add on the CO Bump Alarm Test Gas to regularly test the monitor is functioning properly.
BW Clip Standard Features:
- Maintenance-free: no sensor or battery changes necessary
- Compact, lightweight design with one-button operation
- Designed for a range of harsh environments and extreme temperatures
- Automated self-test of battery, sensor and electronics
- Wide-angle flash, which alerts simultaneously with audible and vibrating alarm
- Automatic logging of the 35 most recent gas events and bump test results
- IP 66/67 — can be submerged up to 1 meter
- Extended event log — up to 35 events
- Automated self-test
- Affordable, with low cost of ownership
- 3-year maintenance free
Unit Includes:
- Detector complete with specified sensor, stainless steel alligator clip and concussion-proof housing
- Calibration/test cap and hose
- Manual
Configurable Options with the IntelliDoX Management System:
- Configuration of high and low alarm setpoints before the device is activated
- Adjustment of alarm setpoints and other parameters as needed throughout the lifespan
- Non-compliance chirp indicator
- Configuration without activation
- Option to enable the noncompliance indicator, which flashes red when a bump test is due or a gas event occurs
- Option to display gas reading during alarm
- User settable bump test reminder
- 7–8 sec Bump test with no more than 1 minute purge
- Option to display the Real Time Clock
Advanced Technology for Safety Compliance and Productivity:
- Unique dual reservoir sensor design dramatically improves instrument performance, response time, and longevity compared to traditional electrochemical sensors and consistently delivers reliable instrument performance under the harshest environmental conditions
- Reflex Technology advanced automated self-test function routinely checks the operating condition of the sensor to increase safety, up-time, and overall worker confidence
IntelliDoX instrument management system is the quickest bump test in the industry with configuration of alarm setpoints. It can perform different tests for up to five BW Clip detectors at once for maximum productivity with easy and accurate record-keeping.
BW Clip Specifications:
- Weight: 0.6 lbs.
- Temperature: CO, -22 to 122°F
- Humidity: 5–95% RH (non-condensing)
- Alarms: Visual, vibrating, and audible
- Typical Battery Life: 3 years
Regulatory Note: The OSHA PEL for CO is 50 ppm (29 CFR 1910.1000, Table Z-1). The BWC3-M default setpoints (35 ppm low / 200 ppm high) provide compliance support; employers must verify all applicable regulatory limits. See 29 CFR 1910.146 for confined space requirements.
Please Note: MM and DD denote the number of months and days left before the gas monitor expires. This monitor does not have a digital display of the gas concentration. Once activated, these units cannot be shut down and will continue to run for their three-year life span, prohibiting these items from being shipped because the alarm may be activated during transit. Additionally, these items are unable to be resold after activation.
Part Number:
BWC3-M 3 Year CO 35-200
PK Safety services BW Technologies by Honeywell gas monitors in-house with factory-trained technicians. For help selecting the right part or to schedule calibration and repair, call 800.829.9580 or contact us online.
Related Searches
Bw Technologies By Honeywell, Co Gas Monitors, Gas Detection
Frequently Asked Questions
How does the BWC3-M differ from the 2-year BW Clip CO (BWC2-M)?
The BWC3-M operates for three years without maintenance compared to two years for the BWC2-M. The 3-year model is also fully compatible with the IntelliDoX docking station for automated bump testing and alarm setpoint configuration throughout its longer lifespan, offering a lower total cost of ownership for high-volume fleets.
Does the BWC3-M require calibration or sensor replacement?
No. The BWC3-M is fully maintenance-free for three years. No calibration, sensor replacement, or battery changes are required. Reflex Technology automated self-tests continuously verify sensor and battery condition. Regular bump testing is recommended to confirm alarm response; use the included test cap with an appropriate CO bump gas.
What CO alarm setpoints does the BWC3-M use?
The BWC3-M ships with default low alarm at 35 ppm and high alarm at 200 ppm. Using the BW IntelliDoX DX-CLIP, setpoints can be reconfigured before or after activation. The OSHA PEL for CO is 50 ppm (29 CFR 1910.1000, Table Z-1); employers should confirm setpoints meet applicable regulatory requirements.
Does the BWC3-M work with IntelliDoX?
Yes. The BWC3-M is compatible with the BW IntelliDoX DX-CLIP, which enables FastBump testing (10 seconds for up to 5 units simultaneously), setpoint configuration, compliance record-keeping, and event log transfer. The IntelliDoX Enabler Kit DX-ENBL-NA is required.
Is a hibernation case available for the BWC3-M?
Yes. The BW Clip Hibernation Case CLIPHB-CASE is compatible with the BWC3-M. When the monitor is idle for a week or more, storing it in the hibernation case pauses the device clock, potentially extending usable life beyond three years.
What accessories does PK Safety recommend for the BWC3-M?
Recommended accessories include the Hard Hat Clip GA-HC-1, the Hibernation Case CLIPHB-CASE, the IntelliDoX DX-CLIP for fleet management, and the CO Bump Alarm Test Gas. Call PK Safety at 800.829.9580 for fleet pricing and configuration support.
The BW Clip 3-Year Detector CO 35ppm–200ppm is a maintenance-free, single gas detector. As your every day companion for hazardous environments, the BW Clip has everything you need — plus new features to make your gas detection easier, safer, and more reliable. It operates up to three years: just turn on the device and it runs continuously — no need for calibration, sensor replacement, battery replacement or battery charging. That means great reliability and no downtime.
Compatible with both the MicroDock II and the new IntelliDoX instrument management systems, the BW Clip is engineered to the highest standards of quality and reliability, keeping you safe and compliant.
Use the hands-free Hard Hat Clip carrying accessory GA-HC-1 with any of the BW single gas monitors. Add on the CO Bump Alarm Test Gas to regularly test the monitor is functioning properly.
BW Clip Standard Features:
- Maintenance-free: no sensor or battery changes necessary
- Compact, lightweight design with one-button operation
- Designed for a range of harsh environments and extreme temperatures
- Automated self-test of battery, sensor and electronics
- Wide-angle flash, which alerts simultaneously with audible and vibrating alarm
- Automatic logging of the 35 most recent gas events and bump test results
- IP 66/67 — can be submerged up to 1 meter
- Extended event log — up to 35 events
- Automated self-test
- Affordable, with low cost of ownership
- 3-year maintenance free
Unit Includes:
- Detector complete with specified sensor, stainless steel alligator clip and concussion-proof housing
- Calibration/test cap and hose
- Manual
Configurable Options with the IntelliDoX Management System:
- Configuration of high and low alarm setpoints before the device is activated
- Adjustment of alarm setpoints and other parameters as needed throughout the lifespan
- Non-compliance chirp indicator
- Configuration without activation
- Option to enable the noncompliance indicator, which flashes red when a bump test is due or a gas event occurs
- Option to display gas reading during alarm
- User settable bump test reminder
- 7–8 sec Bump test with no more than 1 minute purge
- Option to display the Real Time Clock
Advanced Technology for Safety Compliance and Productivity:
- Unique dual reservoir sensor design dramatically improves instrument performance, response time, and longevity compared to traditional electrochemical sensors and consistently delivers reliable instrument performance under the harshest environmental conditions
- Reflex Technology advanced automated self-test function routinely checks the operating condition of the sensor to increase safety, up-time, and overall worker confidence
IntelliDoX instrument management system is the quickest bump test in the industry with configuration of alarm setpoints. It can perform different tests for up to five BW Clip detectors at once for maximum productivity with easy and accurate record-keeping.
BW Clip Specifications:
- Weight: 0.6 lbs.
- Temperature: CO, -22 to 122°F
- Humidity: 5–95% RH (non-condensing)
- Alarms: Visual, vibrating, and audible
- Typical Battery Life: 3 years
Regulatory Note: The OSHA PEL for CO is 50 ppm (29 CFR 1910.1000, Table Z-1). The BWC3-M default setpoints (35 ppm low / 200 ppm high) provide compliance support; employers must verify all applicable regulatory limits. See 29 CFR 1910.146 for confined space requirements.
Please Note: MM and DD denote the number of months and days left before the gas monitor expires. This monitor does not have a digital display of the gas concentration. Once activated, these units cannot be shut down and will continue to run for their three-year life span, prohibiting these items from being shipped because the alarm may be activated during transit. Additionally, these items are unable to be resold after activation.
Part Number:
BWC3-M 3 Year CO 35-200
PK Safety services BW Technologies by Honeywell gas monitors in-house with factory-trained technicians. For help selecting the right part or to schedule calibration and repair, call 800.829.9580 or contact us online.
Related Searches
Bw Technologies By Honeywell, Co Gas Monitors, Gas Detection
Frequently Asked Questions
How does the BWC3-M differ from the 2-year BW Clip CO (BWC2-M)?
The BWC3-M operates for three years without maintenance compared to two years for the BWC2-M. The 3-year model is also fully compatible with the IntelliDoX docking station for automated bump testing and alarm setpoint configuration throughout its longer lifespan, offering a lower total cost of ownership for high-volume fleets.
Does the BWC3-M require calibration or sensor replacement?
No. The BWC3-M is fully maintenance-free for three years. No calibration, sensor replacement, or battery changes are required. Reflex Technology automated self-tests continuously verify sensor and battery condition. Regular bump testing is recommended to confirm alarm response; use the included test cap with an appropriate CO bump gas.
What CO alarm setpoints does the BWC3-M use?
The BWC3-M ships with default low alarm at 35 ppm and high alarm at 200 ppm. Using the BW IntelliDoX DX-CLIP, setpoints can be reconfigured before or after activation. The OSHA PEL for CO is 50 ppm (29 CFR 1910.1000, Table Z-1); employers should confirm setpoints meet applicable regulatory requirements.
Does the BWC3-M work with IntelliDoX?
Yes. The BWC3-M is compatible with the BW IntelliDoX DX-CLIP, which enables FastBump testing (10 seconds for up to 5 units simultaneously), setpoint configuration, compliance record-keeping, and event log transfer. The IntelliDoX Enabler Kit DX-ENBL-NA is required.
Is a hibernation case available for the BWC3-M?
Yes. The BW Clip Hibernation Case CLIPHB-CASE is compatible with the BWC3-M. When the monitor is idle for a week or more, storing it in the hibernation case pauses the device clock, potentially extending usable life beyond three years.
What accessories does PK Safety recommend for the BWC3-M?
Recommended accessories include the Hard Hat Clip GA-HC-1, the Hibernation Case CLIPHB-CASE, the IntelliDoX DX-CLIP for fleet management, and the CO Bump Alarm Test Gas. Call PK Safety at 800.829.9580 for fleet pricing and configuration support.
Specifications
Specifications
-
Type
-
Gas Type
-
Color
-
Product Weight (lbs.)
-
Height (in.)
-
Length (in.)
-
Width (in.)
-
Country of Origin
-
Warranty Info
Reviews (2)
Reviews (2)
Keep your team protected & compliant!
- Expert guidance tailored to your specific needs
- Access responsive customer support when you need it
- Enjoy fast shipping directly to your location
- Benefit from extensive industry knowledge—75+ years of experience
- In-house gas detection calibration & repair services available
