BW Clip 2 Year CO Single Gas Detector BWC2-M
Description
This 2-Year BW Clip from BW Technologies is a maintenance-free, single gas detector for carbon monoxide. This monitor has default alarm setpoints at 35 ppm and 200 ppm, with an alarm setpoint range of 5 ppm to 200 ppm. The BW Clip has everything you need for hazardous environments - plus new features to make your gas detection easier, safer, and more reliable. Just turn on the device and it runs continuously — no need for calibration, sensor replacement, battery replacement or battery charging. That means great reliability and no downtime.
With the 2-year BW Clip for CO, you can use the BW Clip Hibernation Case when you're not using it for a week or more and extend its life by that period of time, up to 12 months.
Add on the CO Bump Alarm Test Gas to regularly test the monitor is functioning properly.
BW Clip Standard Features:
- Maintenance-free: no sensor or battery changes necessary
- Compact, lightweight design with one-button operation
- Designed for a range of harsh environments and extreme temperatures
- Hibernation mode with case accessory or IntelliDoX
- Automated self-test of battery, sensor and electronics
- Default Alarm Setpoints at 35 ppm and 200 ppm
- Alarm Setpoint range of 5 ppm to 200 ppm
- Detector measuring range of 0-300 ppm carbon monoxide
- Wide-angle flash, which alerts simultaneously with audible and vibrating alarm
- Automatic logging of the 35 most recent gas events and bump test results
- IP 66/67 — can be submerged up to 1 meter
- Affordable, with low cost of ownership
Unit Includes:
- Detector complete with specified sensor, stainless steel alligator clip and concussion-proof housing
- Calibration/test cap and hose
- Manual
Use the hands-free Hard Hat Clip carrying accessory GA-HC-1 with any of the BW single gas monitors.
BW Clip Specifications:
- Weight: 0.6 lbs.
- Temperature: -40 to 122°F
- Humidity: 5–95% RH (non-condensing)
- Alarms: Visual, vibrating, and audible
- Typical Battery Life: Two years
Regulatory Note: The OSHA PEL for carbon monoxide is 50 ppm (29 CFR 1910.1000, Table Z-1). The default low alarm setpoint of 35 ppm aligns with NIOSH REL. Employers must evaluate all applicable regulatory limits for their specific operations under applicable regulations including 29 CFR 1910.146 for confined space entry.
Please Note: MM and DD denote the number of months and days left before the gas monitor expires. This monitor does not have a digital display of the gas concentration. Once activated, these units cannot be shut down and will continue to run for their two-year life span, prohibiting these items from being shipped because the alarm may be activated during transit. Additionally, these items are unable to be resold after activation.
Part Number:
BWC2-M 2 Year CO 35-200
PK Safety services BW Technologies by Honeywell gas monitors in-house with factory-trained technicians. For help selecting the right part or to schedule calibration and repair, call 800.829.9580 or contact us online.
Related Searches
Bestselling Products, Bw Technologies By Honeywell, Co Gas Monitors, Gas Detection, Limited Time Offers, Portable Gas Monitors And Detectors, Single-Gas Monitors
Frequently Asked Questions
Is the BW Clip BWC2-M truly maintenance-free for two years?
Yes. Once activated, the BWC2-M runs continuously for up to two years without calibration, sensor replacement, battery replacement, or charging. Automated Reflex Technology self-tests the sensor and battery regularly. If you need to pause use, the optional BW Clip Hibernation Case can extend device life by up to 12 months.
What are the CO alarm setpoints on the BWC2-M?
The BWC2-M ships with default low alarm at 35 ppm and high alarm at 200 ppm. The alarm setpoint range is adjustable from 5 ppm to 200 ppm using an IntelliDoX docking station. The full CO measuring range is 0–300 ppm. OSHA's PEL for CO is 50 ppm per 29 CFR 1910.1000; employers should set setpoints per applicable regulatory requirements and site-specific conditions.
Can I bump test the BW Clip BWC2-M?
Yes. A calibration/test cap and hose are included. For bump test gas, use an appropriate CO bump alarm test gas. The BW IntelliDoX DX-CLIP can perform a FastBump test (10 seconds) for up to five BW Clip units simultaneously for maximum compliance throughput.
Is the BWC2-M rated for water and dust exposure?
Yes. The BW Clip BWC2-M carries an IP 66/67 rating, meaning it is fully dust-tight and can withstand submersion up to 1 meter. It is designed for a range of harsh environments and extreme temperatures (-40 to 122°F).
Does the BWC2-M work with the BW IntelliDoX?
Yes. The BWC2-M is compatible with the BW IntelliDoX DX-CLIP docking station, which enables automated bump testing, alarm setpoint configuration, event log transfer, and compliance record-keeping. Note that the IntelliDoX Enabler Kit DX-ENBL-NA is required to operate the docking station.
Can PK Safety service or calibrate my BW Clip?
PK Safety is a BW Technologies / Honeywell Factory Authorized Service Center with factory-trained technicians. We offer factory-authorized calibration services for a wide range of BW monitors. For service inquiries, call 800.829.9580 or visit our BW Honeywell Gas Monitor Calibration Service page.
Read more
Description
This 2-Year BW Clip from BW Technologies is a maintenance-free, single gas detector for carbon monoxide. This monitor has default alarm setpoints at 35 ppm and 200 ppm, with an alarm setpoint range of 5 ppm to 200 ppm. The BW Clip has everything you need for hazardous environments - plus new features to make your gas detection easier, safer, and more reliable. Just turn on the device and it runs continuously — no need for calibration, sensor replacement, battery replacement or battery charging. That means great reliability and no downtime.
With the 2-year BW Clip for CO, you can use the BW Clip Hibernation Case when you're not using it for a week or more and extend its life by that period of time, up to 12 months.
Add on the CO Bump Alarm Test Gas to regularly test the monitor is functioning properly.
BW Clip Standard Features:
- Maintenance-free: no sensor or battery changes necessary
- Compact, lightweight design with one-button operation
- Designed for a range of harsh environments and extreme temperatures
- Hibernation mode with case accessory or IntelliDoX
- Automated self-test of battery, sensor and electronics
- Default Alarm Setpoints at 35 ppm and 200 ppm
- Alarm Setpoint range of 5 ppm to 200 ppm
- Detector measuring range of 0-300 ppm carbon monoxide
- Wide-angle flash, which alerts simultaneously with audible and vibrating alarm
- Automatic logging of the 35 most recent gas events and bump test results
- IP 66/67 — can be submerged up to 1 meter
- Affordable, with low cost of ownership
Unit Includes:
- Detector complete with specified sensor, stainless steel alligator clip and concussion-proof housing
- Calibration/test cap and hose
- Manual
Use the hands-free Hard Hat Clip carrying accessory GA-HC-1 with any of the BW single gas monitors.
BW Clip Specifications:
- Weight: 0.6 lbs.
- Temperature: -40 to 122°F
- Humidity: 5–95% RH (non-condensing)
- Alarms: Visual, vibrating, and audible
- Typical Battery Life: Two years
Regulatory Note: The OSHA PEL for carbon monoxide is 50 ppm (29 CFR 1910.1000, Table Z-1). The default low alarm setpoint of 35 ppm aligns with NIOSH REL. Employers must evaluate all applicable regulatory limits for their specific operations under applicable regulations including 29 CFR 1910.146 for confined space entry.
Please Note: MM and DD denote the number of months and days left before the gas monitor expires. This monitor does not have a digital display of the gas concentration. Once activated, these units cannot be shut down and will continue to run for their two-year life span, prohibiting these items from being shipped because the alarm may be activated during transit. Additionally, these items are unable to be resold after activation.
Part Number:
BWC2-M 2 Year CO 35-200
PK Safety services BW Technologies by Honeywell gas monitors in-house with factory-trained technicians. For help selecting the right part or to schedule calibration and repair, call 800.829.9580 or contact us online.
Related Searches
Bestselling Products, Bw Technologies By Honeywell, Co Gas Monitors, Gas Detection, Limited Time Offers, Portable Gas Monitors And Detectors, Single-Gas Monitors
Frequently Asked Questions
Is the BW Clip BWC2-M truly maintenance-free for two years?
Yes. Once activated, the BWC2-M runs continuously for up to two years without calibration, sensor replacement, battery replacement, or charging. Automated Reflex Technology self-tests the sensor and battery regularly. If you need to pause use, the optional BW Clip Hibernation Case can extend device life by up to 12 months.
What are the CO alarm setpoints on the BWC2-M?
The BWC2-M ships with default low alarm at 35 ppm and high alarm at 200 ppm. The alarm setpoint range is adjustable from 5 ppm to 200 ppm using an IntelliDoX docking station. The full CO measuring range is 0–300 ppm. OSHA's PEL for CO is 50 ppm per 29 CFR 1910.1000; employers should set setpoints per applicable regulatory requirements and site-specific conditions.
Can I bump test the BW Clip BWC2-M?
Yes. A calibration/test cap and hose are included. For bump test gas, use an appropriate CO bump alarm test gas. The BW IntelliDoX DX-CLIP can perform a FastBump test (10 seconds) for up to five BW Clip units simultaneously for maximum compliance throughput.
Is the BWC2-M rated for water and dust exposure?
Yes. The BW Clip BWC2-M carries an IP 66/67 rating, meaning it is fully dust-tight and can withstand submersion up to 1 meter. It is designed for a range of harsh environments and extreme temperatures (-40 to 122°F).
Does the BWC2-M work with the BW IntelliDoX?
Yes. The BWC2-M is compatible with the BW IntelliDoX DX-CLIP docking station, which enables automated bump testing, alarm setpoint configuration, event log transfer, and compliance record-keeping. Note that the IntelliDoX Enabler Kit DX-ENBL-NA is required to operate the docking station.
Can PK Safety service or calibrate my BW Clip?
PK Safety is a BW Technologies / Honeywell Factory Authorized Service Center with factory-trained technicians. We offer factory-authorized calibration services for a wide range of BW monitors. For service inquiries, call 800.829.9580 or visit our BW Honeywell Gas Monitor Calibration Service page.
This 2-Year BW Clip from BW Technologies is a maintenance-free, single gas detector for carbon monoxide. This monitor has default alarm setpoints at 35 ppm and 200 ppm, with an alarm setpoint range of 5 ppm to 200 ppm. The BW Clip has everything you need for hazardous environments - plus new features to make your gas detection easier, safer, and more reliable. Just turn on the device and it runs continuously — no need for calibration, sensor replacement, battery replacement or battery charging. That means great reliability and no downtime.
With the 2-year BW Clip for CO, you can use the BW Clip Hibernation Case when you're not using it for a week or more and extend its life by that period of time, up to 12 months.
Add on the CO Bump Alarm Test Gas to regularly test the monitor is functioning properly.
BW Clip Standard Features:
- Maintenance-free: no sensor or battery changes necessary
- Compact, lightweight design with one-button operation
- Designed for a range of harsh environments and extreme temperatures
- Hibernation mode with case accessory or IntelliDoX
- Automated self-test of battery, sensor and electronics
- Default Alarm Setpoints at 35 ppm and 200 ppm
- Alarm Setpoint range of 5 ppm to 200 ppm
- Detector measuring range of 0-300 ppm carbon monoxide
- Wide-angle flash, which alerts simultaneously with audible and vibrating alarm
- Automatic logging of the 35 most recent gas events and bump test results
- IP 66/67 — can be submerged up to 1 meter
- Affordable, with low cost of ownership
Unit Includes:
- Detector complete with specified sensor, stainless steel alligator clip and concussion-proof housing
- Calibration/test cap and hose
- Manual
Use the hands-free Hard Hat Clip carrying accessory GA-HC-1 with any of the BW single gas monitors.
BW Clip Specifications:
- Weight: 0.6 lbs.
- Temperature: -40 to 122°F
- Humidity: 5–95% RH (non-condensing)
- Alarms: Visual, vibrating, and audible
- Typical Battery Life: Two years
Regulatory Note: The OSHA PEL for carbon monoxide is 50 ppm (29 CFR 1910.1000, Table Z-1). The default low alarm setpoint of 35 ppm aligns with NIOSH REL. Employers must evaluate all applicable regulatory limits for their specific operations under applicable regulations including 29 CFR 1910.146 for confined space entry.
Please Note: MM and DD denote the number of months and days left before the gas monitor expires. This monitor does not have a digital display of the gas concentration. Once activated, these units cannot be shut down and will continue to run for their two-year life span, prohibiting these items from being shipped because the alarm may be activated during transit. Additionally, these items are unable to be resold after activation.
Part Number:
BWC2-M 2 Year CO 35-200
PK Safety services BW Technologies by Honeywell gas monitors in-house with factory-trained technicians. For help selecting the right part or to schedule calibration and repair, call 800.829.9580 or contact us online.
Related Searches
Bestselling Products, Bw Technologies By Honeywell, Co Gas Monitors, Gas Detection, Limited Time Offers, Portable Gas Monitors And Detectors, Single-Gas Monitors
Frequently Asked Questions
Is the BW Clip BWC2-M truly maintenance-free for two years?
Yes. Once activated, the BWC2-M runs continuously for up to two years without calibration, sensor replacement, battery replacement, or charging. Automated Reflex Technology self-tests the sensor and battery regularly. If you need to pause use, the optional BW Clip Hibernation Case can extend device life by up to 12 months.
What are the CO alarm setpoints on the BWC2-M?
The BWC2-M ships with default low alarm at 35 ppm and high alarm at 200 ppm. The alarm setpoint range is adjustable from 5 ppm to 200 ppm using an IntelliDoX docking station. The full CO measuring range is 0–300 ppm. OSHA's PEL for CO is 50 ppm per 29 CFR 1910.1000; employers should set setpoints per applicable regulatory requirements and site-specific conditions.
Can I bump test the BW Clip BWC2-M?
Yes. A calibration/test cap and hose are included. For bump test gas, use an appropriate CO bump alarm test gas. The BW IntelliDoX DX-CLIP can perform a FastBump test (10 seconds) for up to five BW Clip units simultaneously for maximum compliance throughput.
Is the BWC2-M rated for water and dust exposure?
Yes. The BW Clip BWC2-M carries an IP 66/67 rating, meaning it is fully dust-tight and can withstand submersion up to 1 meter. It is designed for a range of harsh environments and extreme temperatures (-40 to 122°F).
Does the BWC2-M work with the BW IntelliDoX?
Yes. The BWC2-M is compatible with the BW IntelliDoX DX-CLIP docking station, which enables automated bump testing, alarm setpoint configuration, event log transfer, and compliance record-keeping. Note that the IntelliDoX Enabler Kit DX-ENBL-NA is required to operate the docking station.
Can PK Safety service or calibrate my BW Clip?
PK Safety is a BW Technologies / Honeywell Factory Authorized Service Center with factory-trained technicians. We offer factory-authorized calibration services for a wide range of BW monitors. For service inquiries, call 800.829.9580 or visit our BW Honeywell Gas Monitor Calibration Service page.
Specifications
Specifications
-
Gas Type
-
Color
-
Product Weight (lbs.)
-
Height (in.)
-
Length (in.)
-
Width (in.)
-
Country of Origin
Reviews (7)
Reviews (7)
Keep your team protected & compliant!
- Expert guidance tailored to your specific needs
- Access responsive customer support when you need it
- Enjoy fast shipping directly to your location
- Benefit from extensive industry knowledge—75+ years of experience
- In-house gas detection calibration & repair services available
