BW Clip 2 Year H2S Single Gas Detector BWC2-H
Description
The BW Clip BWC2-H is a maintenance-free, two-year continuous single-gas detector for Hydrogen Sulfide (H2S) monitoring. Once activated, it runs continuously — no charging, no calibration required for daily use, no battery or sensor changes. It is designed for workers in oil and gas, wastewater, confined space, and industrial applications where H2S presents a serious exposure hazard.
The OSHA H2S ceiling PEL is 20 ppm per 29 CFR 1910.1000. Default alarm setpoints are preset at 10 ppm (low) and 15 ppm (high), adjustable between 1.6 ppm and 20 ppm. The detection range is 0-100 ppm. Alarms are audible, visual (wide-angle flash), and vibrating.
BW Clip BWC2-H Features:
- Maintenance-free — no sensor, battery, or charging required
- Compact, lightweight, one-button operation
- IP 66/67 — submersible to 1 meter
- Default alarm setpoints: 10 ppm low / 15 ppm high
- Detection range: 0-100 ppm H2S
- Audible, visual, and vibrating alarms
- Logs 35 most recent gas events and bump test results automatically
- Compatible with the BW Clip Hibernation Case to extend service life up to 12 months
- Compatible with the Hard Hat Clip GA-HC-1 for hands-free wear
Unit Includes:
- Detector with H2S sensor, stainless steel alligator clip, and concussion-proof housing
- Calibration/test cap and hose
- Manual
Note: Once activated, the BWC2-H cannot be shut down and runs continuously for its two-year service life. Units cannot be resold after activation. Non-activated units may be returned.
Part Number:
BWC2-H (2 Year H2S 10-15)
PK Safety services BW Honeywell gas monitors in-house with factory-trained technicians. For help selecting the right part or to schedule calibration and repair, call 800.829.9580 or contact us online.
Related Searches
Bestselling Products, BW Technologies By Honeywell, Gas Detection, H2S Gas Monitors, Portable Gas Monitors And Detectors, Single-Gas Monitors
Frequently Asked Questions
What does the BW Clip BWC2-H detect?
The BW Clip BWC2-H detects Hydrogen Sulfide (H2S) gas. Default alarm setpoints are 10 ppm (low) and 15 ppm (high), adjustable from 1.6 ppm to 20 ppm. Detection range is 0-100 ppm.
How long does the BWC2-H run?
The BWC2-H provides two years of continuous maintenance-free operation — no charging, no sensor changes, no battery replacements required.
Does the BWC2-H display the gas concentration?
No. The standard BWC2-H does not have a digital concentration display. For real-time concentration readout, consider the BW Clip Real Time BWC2R-H.
What is the OSHA PEL for hydrogen sulfide?
The OSHA H2S ceiling PEL is 20 ppm per 29 CFR 1910.1000, with an acceptable maximum peak of 50 ppm for 10 minutes. The BWC2-H default alarm setpoints are calibrated for compliance with these limits.
Can I extend the BWC2-H service life?
Yes. Using the BW Clip Hibernation Case when the monitor is not in use for a week or more can extend service life by up to 12 months.
Can PK Safety service my BW Clip detectors?
Yes. PK Safety is a BW Technologies / Honeywell Factory Authorized Service Center. For fleet management or replacement support, call 800.829.9580.
Read more
Description
The BW Clip BWC2-H is a maintenance-free, two-year continuous single-gas detector for Hydrogen Sulfide (H2S) monitoring. Once activated, it runs continuously — no charging, no calibration required for daily use, no battery or sensor changes. It is designed for workers in oil and gas, wastewater, confined space, and industrial applications where H2S presents a serious exposure hazard.
The OSHA H2S ceiling PEL is 20 ppm per 29 CFR 1910.1000. Default alarm setpoints are preset at 10 ppm (low) and 15 ppm (high), adjustable between 1.6 ppm and 20 ppm. The detection range is 0-100 ppm. Alarms are audible, visual (wide-angle flash), and vibrating.
BW Clip BWC2-H Features:
- Maintenance-free — no sensor, battery, or charging required
- Compact, lightweight, one-button operation
- IP 66/67 — submersible to 1 meter
- Default alarm setpoints: 10 ppm low / 15 ppm high
- Detection range: 0-100 ppm H2S
- Audible, visual, and vibrating alarms
- Logs 35 most recent gas events and bump test results automatically
- Compatible with the BW Clip Hibernation Case to extend service life up to 12 months
- Compatible with the Hard Hat Clip GA-HC-1 for hands-free wear
Unit Includes:
- Detector with H2S sensor, stainless steel alligator clip, and concussion-proof housing
- Calibration/test cap and hose
- Manual
Note: Once activated, the BWC2-H cannot be shut down and runs continuously for its two-year service life. Units cannot be resold after activation. Non-activated units may be returned.
Part Number:
BWC2-H (2 Year H2S 10-15)
PK Safety services BW Honeywell gas monitors in-house with factory-trained technicians. For help selecting the right part or to schedule calibration and repair, call 800.829.9580 or contact us online.
Related Searches
Bestselling Products, BW Technologies By Honeywell, Gas Detection, H2S Gas Monitors, Portable Gas Monitors And Detectors, Single-Gas Monitors
Frequently Asked Questions
What does the BW Clip BWC2-H detect?
The BW Clip BWC2-H detects Hydrogen Sulfide (H2S) gas. Default alarm setpoints are 10 ppm (low) and 15 ppm (high), adjustable from 1.6 ppm to 20 ppm. Detection range is 0-100 ppm.
How long does the BWC2-H run?
The BWC2-H provides two years of continuous maintenance-free operation — no charging, no sensor changes, no battery replacements required.
Does the BWC2-H display the gas concentration?
No. The standard BWC2-H does not have a digital concentration display. For real-time concentration readout, consider the BW Clip Real Time BWC2R-H.
What is the OSHA PEL for hydrogen sulfide?
The OSHA H2S ceiling PEL is 20 ppm per 29 CFR 1910.1000, with an acceptable maximum peak of 50 ppm for 10 minutes. The BWC2-H default alarm setpoints are calibrated for compliance with these limits.
Can I extend the BWC2-H service life?
Yes. Using the BW Clip Hibernation Case when the monitor is not in use for a week or more can extend service life by up to 12 months.
Can PK Safety service my BW Clip detectors?
Yes. PK Safety is a BW Technologies / Honeywell Factory Authorized Service Center. For fleet management or replacement support, call 800.829.9580.
The BW Clip BWC2-H is a maintenance-free, two-year continuous single-gas detector for Hydrogen Sulfide (H2S) monitoring. Once activated, it runs continuously — no charging, no calibration required for daily use, no battery or sensor changes. It is designed for workers in oil and gas, wastewater, confined space, and industrial applications where H2S presents a serious exposure hazard.
The OSHA H2S ceiling PEL is 20 ppm per 29 CFR 1910.1000. Default alarm setpoints are preset at 10 ppm (low) and 15 ppm (high), adjustable between 1.6 ppm and 20 ppm. The detection range is 0-100 ppm. Alarms are audible, visual (wide-angle flash), and vibrating.
BW Clip BWC2-H Features:
- Maintenance-free — no sensor, battery, or charging required
- Compact, lightweight, one-button operation
- IP 66/67 — submersible to 1 meter
- Default alarm setpoints: 10 ppm low / 15 ppm high
- Detection range: 0-100 ppm H2S
- Audible, visual, and vibrating alarms
- Logs 35 most recent gas events and bump test results automatically
- Compatible with the BW Clip Hibernation Case to extend service life up to 12 months
- Compatible with the Hard Hat Clip GA-HC-1 for hands-free wear
Unit Includes:
- Detector with H2S sensor, stainless steel alligator clip, and concussion-proof housing
- Calibration/test cap and hose
- Manual
Note: Once activated, the BWC2-H cannot be shut down and runs continuously for its two-year service life. Units cannot be resold after activation. Non-activated units may be returned.
Part Number:
BWC2-H (2 Year H2S 10-15)
PK Safety services BW Honeywell gas monitors in-house with factory-trained technicians. For help selecting the right part or to schedule calibration and repair, call 800.829.9580 or contact us online.
Related Searches
Bestselling Products, BW Technologies By Honeywell, Gas Detection, H2S Gas Monitors, Portable Gas Monitors And Detectors, Single-Gas Monitors
Frequently Asked Questions
What does the BW Clip BWC2-H detect?
The BW Clip BWC2-H detects Hydrogen Sulfide (H2S) gas. Default alarm setpoints are 10 ppm (low) and 15 ppm (high), adjustable from 1.6 ppm to 20 ppm. Detection range is 0-100 ppm.
How long does the BWC2-H run?
The BWC2-H provides two years of continuous maintenance-free operation — no charging, no sensor changes, no battery replacements required.
Does the BWC2-H display the gas concentration?
No. The standard BWC2-H does not have a digital concentration display. For real-time concentration readout, consider the BW Clip Real Time BWC2R-H.
What is the OSHA PEL for hydrogen sulfide?
The OSHA H2S ceiling PEL is 20 ppm per 29 CFR 1910.1000, with an acceptable maximum peak of 50 ppm for 10 minutes. The BWC2-H default alarm setpoints are calibrated for compliance with these limits.
Can I extend the BWC2-H service life?
Yes. Using the BW Clip Hibernation Case when the monitor is not in use for a week or more can extend service life by up to 12 months.
Can PK Safety service my BW Clip detectors?
Yes. PK Safety is a BW Technologies / Honeywell Factory Authorized Service Center. For fleet management or replacement support, call 800.829.9580.
Specifications
Specifications
-
Type
-
Gas Type
-
Product Weight (lbs.)
-
Height (in.)
-
Length (in.)
-
Width (in.)
-
Country of Origin
Reviews (17)
Reviews (17)
Keep your team protected & compliant!
- Expert guidance tailored to your specific needs
- Access responsive customer support when you need it
- Enjoy fast shipping directly to your location
- Benefit from extensive industry knowledge—75+ years of experience
- In-house gas detection calibration & repair services available
