BW Calibration Gas Regulator REG-0.5 LPM
Description
The BW Constant Flow Regulator REG-0.5 delivers calibration gas at a precise, constant rate of 0.5 LPM directly from disposable aluminum calibration gas canisters. It is designed for use with non-pumped (diffusion) monitors including the BW Clip, GasAlert Quattro, GasAlertMicroClip XT, and the GasAlertMicro 5 (diffusion model).
Comparable to the ISG Flow Rate Regulator.
Key Features:
- Constant 0.5 LPM flow rate for diffusion-type monitors
- Attaches directly to standard disposable aluminum calibration gas cylinders
- Compatible with BW Clip (H2S, CO, O2, SO2 models), GasAlert Quattro, and MicroClip XT
- Simple and reliable — no moving parts for demand-flow activation
Note: For pumped monitors or docking station calibrations, use the BW REG-DF-1 Demand Flow Regulator instead.
Part Number:
REG-0.5
PK Safety services BW Technologies by Honeywell gas monitors in-house with factory-trained technicians. For help selecting the right part or to schedule calibration and repair, call 800.829.9580 or contact us online.
Related Searches
Bw Technologies By Honeywell, Calibration Gas, Gas Detection, Gas Detector Accessories
Frequently Asked Questions
What is the REG-0.5 regulator used for?
The BW REG-0.5 delivers calibration gas at a constant 0.5 LPM rate for manual calibration and bump testing of diffusion-type (non-pumped) BW gas monitors including the BW Clip CO, BW Clip H2S, GasAlert Quattro, and GasAlertMicroClip XT.
When should I use the REG-0.5 instead of the REG-DF-1?
Use the REG-0.5 for manual calibration of diffusion-type monitors — these do not actively pump gas and require a constant flow rate to flood the sensor for bump testing. For pumped monitors or automated docking stations such as the BW IntelliDoX DX-CLIP, use the REG-DF-1 Demand Flow Regulator instead.
What calibration gas is compatible with the REG-0.5?
The REG-0.5 attaches to standard disposable aluminum calibration gas cylinders. For BW Clip monitors, pair it with single-gas test gas appropriate for the specific sensor (H2S, CO, O2, or SO2). For 4-gas monitors such as the GasAlert Quattro, use the BW CG-Q34-4 4-gas mix.
How often should the REG-0.5 regulator be replaced?
Inspect the regulator before each use for damage, thread wear, or leaks. Replace if gas leaks from the connection or if the flow rate is noticeably inconsistent — an inaccurate flow rate can cause failed calibrations and unreliable sensor response tests. Always store regulators in a clean, dry environment to prevent corrosion.
Does using an expired calibration gas cylinder affect my OSHA compliance?
Yes. Using expired calibration gas to calibrate or bump test gas monitors undermines confidence in sensor accuracy. OSHA 29 CFR 1910.1000 requires employer-maintained hazardous atmosphere monitoring, and 29 CFR 1910.146 mandates verified gas detection for permit-required confined space entry. Always check the fill date and two-year expiration before calibrating.
Can PK Safety recommend the right regulator for my BW monitor?
Absolutely. PK Safety is a BW Technologies by Honeywell authorized reseller and Factory Authorized Service Center. Call 800.829.9580 to speak with a gas detection specialist, or visit our BW Honeywell Gas Monitor Calibration Service page for full service options.
Read more
Description
The BW Constant Flow Regulator REG-0.5 delivers calibration gas at a precise, constant rate of 0.5 LPM directly from disposable aluminum calibration gas canisters. It is designed for use with non-pumped (diffusion) monitors including the BW Clip, GasAlert Quattro, GasAlertMicroClip XT, and the GasAlertMicro 5 (diffusion model).
Comparable to the ISG Flow Rate Regulator.
Key Features:
- Constant 0.5 LPM flow rate for diffusion-type monitors
- Attaches directly to standard disposable aluminum calibration gas cylinders
- Compatible with BW Clip (H2S, CO, O2, SO2 models), GasAlert Quattro, and MicroClip XT
- Simple and reliable — no moving parts for demand-flow activation
Note: For pumped monitors or docking station calibrations, use the BW REG-DF-1 Demand Flow Regulator instead.
Part Number:
REG-0.5
PK Safety services BW Technologies by Honeywell gas monitors in-house with factory-trained technicians. For help selecting the right part or to schedule calibration and repair, call 800.829.9580 or contact us online.
Related Searches
Bw Technologies By Honeywell, Calibration Gas, Gas Detection, Gas Detector Accessories
Frequently Asked Questions
What is the REG-0.5 regulator used for?
The BW REG-0.5 delivers calibration gas at a constant 0.5 LPM rate for manual calibration and bump testing of diffusion-type (non-pumped) BW gas monitors including the BW Clip CO, BW Clip H2S, GasAlert Quattro, and GasAlertMicroClip XT.
When should I use the REG-0.5 instead of the REG-DF-1?
Use the REG-0.5 for manual calibration of diffusion-type monitors — these do not actively pump gas and require a constant flow rate to flood the sensor for bump testing. For pumped monitors or automated docking stations such as the BW IntelliDoX DX-CLIP, use the REG-DF-1 Demand Flow Regulator instead.
What calibration gas is compatible with the REG-0.5?
The REG-0.5 attaches to standard disposable aluminum calibration gas cylinders. For BW Clip monitors, pair it with single-gas test gas appropriate for the specific sensor (H2S, CO, O2, or SO2). For 4-gas monitors such as the GasAlert Quattro, use the BW CG-Q34-4 4-gas mix.
How often should the REG-0.5 regulator be replaced?
Inspect the regulator before each use for damage, thread wear, or leaks. Replace if gas leaks from the connection or if the flow rate is noticeably inconsistent — an inaccurate flow rate can cause failed calibrations and unreliable sensor response tests. Always store regulators in a clean, dry environment to prevent corrosion.
Does using an expired calibration gas cylinder affect my OSHA compliance?
Yes. Using expired calibration gas to calibrate or bump test gas monitors undermines confidence in sensor accuracy. OSHA 29 CFR 1910.1000 requires employer-maintained hazardous atmosphere monitoring, and 29 CFR 1910.146 mandates verified gas detection for permit-required confined space entry. Always check the fill date and two-year expiration before calibrating.
Can PK Safety recommend the right regulator for my BW monitor?
Absolutely. PK Safety is a BW Technologies by Honeywell authorized reseller and Factory Authorized Service Center. Call 800.829.9580 to speak with a gas detection specialist, or visit our BW Honeywell Gas Monitor Calibration Service page for full service options.
The BW Constant Flow Regulator REG-0.5 delivers calibration gas at a precise, constant rate of 0.5 LPM directly from disposable aluminum calibration gas canisters. It is designed for use with non-pumped (diffusion) monitors including the BW Clip, GasAlert Quattro, GasAlertMicroClip XT, and the GasAlertMicro 5 (diffusion model).
Comparable to the ISG Flow Rate Regulator.
Key Features:
- Constant 0.5 LPM flow rate for diffusion-type monitors
- Attaches directly to standard disposable aluminum calibration gas cylinders
- Compatible with BW Clip (H2S, CO, O2, SO2 models), GasAlert Quattro, and MicroClip XT
- Simple and reliable — no moving parts for demand-flow activation
Note: For pumped monitors or docking station calibrations, use the BW REG-DF-1 Demand Flow Regulator instead.
Part Number:
REG-0.5
PK Safety services BW Technologies by Honeywell gas monitors in-house with factory-trained technicians. For help selecting the right part or to schedule calibration and repair, call 800.829.9580 or contact us online.
Related Searches
Bw Technologies By Honeywell, Calibration Gas, Gas Detection, Gas Detector Accessories
Frequently Asked Questions
What is the REG-0.5 regulator used for?
The BW REG-0.5 delivers calibration gas at a constant 0.5 LPM rate for manual calibration and bump testing of diffusion-type (non-pumped) BW gas monitors including the BW Clip CO, BW Clip H2S, GasAlert Quattro, and GasAlertMicroClip XT.
When should I use the REG-0.5 instead of the REG-DF-1?
Use the REG-0.5 for manual calibration of diffusion-type monitors — these do not actively pump gas and require a constant flow rate to flood the sensor for bump testing. For pumped monitors or automated docking stations such as the BW IntelliDoX DX-CLIP, use the REG-DF-1 Demand Flow Regulator instead.
What calibration gas is compatible with the REG-0.5?
The REG-0.5 attaches to standard disposable aluminum calibration gas cylinders. For BW Clip monitors, pair it with single-gas test gas appropriate for the specific sensor (H2S, CO, O2, or SO2). For 4-gas monitors such as the GasAlert Quattro, use the BW CG-Q34-4 4-gas mix.
How often should the REG-0.5 regulator be replaced?
Inspect the regulator before each use for damage, thread wear, or leaks. Replace if gas leaks from the connection or if the flow rate is noticeably inconsistent — an inaccurate flow rate can cause failed calibrations and unreliable sensor response tests. Always store regulators in a clean, dry environment to prevent corrosion.
Does using an expired calibration gas cylinder affect my OSHA compliance?
Yes. Using expired calibration gas to calibrate or bump test gas monitors undermines confidence in sensor accuracy. OSHA 29 CFR 1910.1000 requires employer-maintained hazardous atmosphere monitoring, and 29 CFR 1910.146 mandates verified gas detection for permit-required confined space entry. Always check the fill date and two-year expiration before calibrating.
Can PK Safety recommend the right regulator for my BW monitor?
Absolutely. PK Safety is a BW Technologies by Honeywell authorized reseller and Factory Authorized Service Center. Call 800.829.9580 to speak with a gas detection specialist, or visit our BW Honeywell Gas Monitor Calibration Service page for full service options.
Specifications
Specifications
-
Color
-
Product Weight (lbs.)
-
Height (in.)
-
Length (in.)
-
Width (in.)
-
Country of Origin
Reviews (3)
Reviews (3)
Keep your team protected & compliant!
- Expert guidance tailored to your specific needs
- Access responsive customer support when you need it
- Enjoy fast shipping directly to your location
- Benefit from extensive industry knowledge—75+ years of experience
- In-house gas detection calibration & repair services available
