WatchGas SST1 Calibration Cap SST1-CALCAP-10 10/pack
Description
A calibration cap connects calibration gas directly to the SST1 sensor port — without it, you can't calibrate the detector.
The WatchGas SST1 Calibration Cap (SST1-CALCAP-10) is the interface fitting that seals calibration gas flow from the cylinder or the SST-DOCK docking station directly into the SST1 single-gas monitor's sensor inlet. It's a consumable part: caps wear over time and should be replaced on a regular schedule or any time the seal is compromised.
This listing is the 10-pack — sized for teams that calibrate regularly or manage a fleet of SST1 monitors. Having caps on hand means a worn or damaged cap doesn't halt a calibration run.
Compatibility: SST1 and SST1/E single-gas monitor series only. Not compatible with SST4 or SST5 monitors (those use different docking-station connection fittings).
PK Safety services the full WatchGas SST line with factory-trained technicians in-house. If you need help spec'ing calibration supplies for your SST1 fleet or integrating the bump test and calibration workflow with the SST-DOCK, call us at
800.829.9580.
Technical documents:
SST Accessories Brochure
Part Number: SST1-CALCAP-10 — WatchGas SST1 Calibration Cap, 10-pack
Frequently Asked Questions
What does the SST1 Calibration Cap do?
The SST1 Calibration Cap creates a sealed connection between the calibration gas source and the SST1 monitor's sensor inlet. Without the cap in place, calibration gas can't be delivered accurately to the sensor, which means the calibration result will be unreliable. The cap is required for both manual calibrations and for use with the
WatchGas SST-DOCK docking station.
How often should I replace the SST1 Calibration Cap?
Replace the cal cap whenever the seal shows wear — cracking, deformation, or loss of fit — and as part of a routine maintenance schedule. A compromised seal causes calibration gas to escape rather than flow fully into the sensor, which produces inaccurate calibration results. For fleets calibrating frequently or operating in harsh environments, having a 10-pack on hand prevents a worn cap from interrupting a calibration run.
Which WatchGas monitors is the SST1-CALCAP-10 compatible with?
The SST1-CALCAP-10 is compatible with the WatchGas SST1 and SST1/E single-gas monitor series. It is not compatible with the SST4 series (SST4-MICRO, SST4-MINI, SST4-PUMP) or SST5 — those monitors use different connection fittings for the docking-station interface. If you're unsure which calibration cap fits your monitor, call PK Safety at
800.829.9580.
Does the calibration cap work with the SST-DOCK docking station and the SST1 Bump Test Starter?
Yes. The SST1-CALCAP-10 is the same fitting used with the
WatchGas SST-DOCK docking station for automated bump testing and calibration, and with the
SST1 Bump Test Starter for standalone field bump tests. One cap type covers both workflows on the SST1 platform.
Need help choosing calibration supplies for your SST1 fleet? Call PK Safety at
800.829.9580.
Specifications
- Compatible monitors: WatchGas SST1, SST1/E single-gas series
- Pack size: 10 caps per order
- Function: sealed calibration gas interface between cylinder/dock and SST1 sensor inlet
- Replace when: seal shows wear, cracking, or loss of fit
- Part Number: SST1-CALCAP-10
Read more
Description
A calibration cap connects calibration gas directly to the SST1 sensor port — without it, you can't calibrate the detector.
The WatchGas SST1 Calibration Cap (SST1-CALCAP-10) is the interface fitting that seals calibration gas flow from the cylinder or the SST-DOCK docking station directly into the SST1 single-gas monitor's sensor inlet. It's a consumable part: caps wear over time and should be replaced on a regular schedule or any time the seal is compromised.
This listing is the 10-pack — sized for teams that calibrate regularly or manage a fleet of SST1 monitors. Having caps on hand means a worn or damaged cap doesn't halt a calibration run.
Compatibility: SST1 and SST1/E single-gas monitor series only. Not compatible with SST4 or SST5 monitors (those use different docking-station connection fittings).
PK Safety services the full WatchGas SST line with factory-trained technicians in-house. If you need help spec'ing calibration supplies for your SST1 fleet or integrating the bump test and calibration workflow with the SST-DOCK, call us at 800.829.9580.
Technical documents:
SST Accessories Brochure
Part Number: SST1-CALCAP-10 — WatchGas SST1 Calibration Cap, 10-pack
Frequently Asked Questions
What does the SST1 Calibration Cap do?
The SST1 Calibration Cap creates a sealed connection between the calibration gas source and the SST1 monitor's sensor inlet. Without the cap in place, calibration gas can't be delivered accurately to the sensor, which means the calibration result will be unreliable. The cap is required for both manual calibrations and for use with the WatchGas SST-DOCK docking station.
How often should I replace the SST1 Calibration Cap?
Replace the cal cap whenever the seal shows wear — cracking, deformation, or loss of fit — and as part of a routine maintenance schedule. A compromised seal causes calibration gas to escape rather than flow fully into the sensor, which produces inaccurate calibration results. For fleets calibrating frequently or operating in harsh environments, having a 10-pack on hand prevents a worn cap from interrupting a calibration run.
Which WatchGas monitors is the SST1-CALCAP-10 compatible with?
The SST1-CALCAP-10 is compatible with the WatchGas SST1 and SST1/E single-gas monitor series. It is not compatible with the SST4 series (SST4-MICRO, SST4-MINI, SST4-PUMP) or SST5 — those monitors use different connection fittings for the docking-station interface. If you're unsure which calibration cap fits your monitor, call PK Safety at 800.829.9580.
Does the calibration cap work with the SST-DOCK docking station and the SST1 Bump Test Starter?
Yes. The SST1-CALCAP-10 is the same fitting used with the WatchGas SST-DOCK docking station for automated bump testing and calibration, and with the SST1 Bump Test Starter for standalone field bump tests. One cap type covers both workflows on the SST1 platform.
Need help choosing calibration supplies for your SST1 fleet? Call PK Safety at 800.829.9580.
Specifications
- Compatible monitors: WatchGas SST1, SST1/E single-gas series
- Pack size: 10 caps per order
- Function: sealed calibration gas interface between cylinder/dock and SST1 sensor inlet
- Replace when: seal shows wear, cracking, or loss of fit
- Part Number: SST1-CALCAP-10
A calibration cap connects calibration gas directly to the SST1 sensor port — without it, you can't calibrate the detector.
The WatchGas SST1 Calibration Cap (SST1-CALCAP-10) is the interface fitting that seals calibration gas flow from the cylinder or the SST-DOCK docking station directly into the SST1 single-gas monitor's sensor inlet. It's a consumable part: caps wear over time and should be replaced on a regular schedule or any time the seal is compromised.
This listing is the 10-pack — sized for teams that calibrate regularly or manage a fleet of SST1 monitors. Having caps on hand means a worn or damaged cap doesn't halt a calibration run.
Compatibility: SST1 and SST1/E single-gas monitor series only. Not compatible with SST4 or SST5 monitors (those use different docking-station connection fittings).
PK Safety services the full WatchGas SST line with factory-trained technicians in-house. If you need help spec'ing calibration supplies for your SST1 fleet or integrating the bump test and calibration workflow with the SST-DOCK, call us at 800.829.9580.
Technical documents:
SST Accessories Brochure
Part Number: SST1-CALCAP-10 — WatchGas SST1 Calibration Cap, 10-pack
Frequently Asked Questions
What does the SST1 Calibration Cap do?
The SST1 Calibration Cap creates a sealed connection between the calibration gas source and the SST1 monitor's sensor inlet. Without the cap in place, calibration gas can't be delivered accurately to the sensor, which means the calibration result will be unreliable. The cap is required for both manual calibrations and for use with the WatchGas SST-DOCK docking station.
How often should I replace the SST1 Calibration Cap?
Replace the cal cap whenever the seal shows wear — cracking, deformation, or loss of fit — and as part of a routine maintenance schedule. A compromised seal causes calibration gas to escape rather than flow fully into the sensor, which produces inaccurate calibration results. For fleets calibrating frequently or operating in harsh environments, having a 10-pack on hand prevents a worn cap from interrupting a calibration run.
Which WatchGas monitors is the SST1-CALCAP-10 compatible with?
The SST1-CALCAP-10 is compatible with the WatchGas SST1 and SST1/E single-gas monitor series. It is not compatible with the SST4 series (SST4-MICRO, SST4-MINI, SST4-PUMP) or SST5 — those monitors use different connection fittings for the docking-station interface. If you're unsure which calibration cap fits your monitor, call PK Safety at 800.829.9580.
Does the calibration cap work with the SST-DOCK docking station and the SST1 Bump Test Starter?
Yes. The SST1-CALCAP-10 is the same fitting used with the WatchGas SST-DOCK docking station for automated bump testing and calibration, and with the SST1 Bump Test Starter for standalone field bump tests. One cap type covers both workflows on the SST1 platform.
Need help choosing calibration supplies for your SST1 fleet? Call PK Safety at 800.829.9580.
Specifications
- Compatible monitors: WatchGas SST1, SST1/E single-gas series
- Pack size: 10 caps per order
- Function: sealed calibration gas interface between cylinder/dock and SST1 sensor inlet
- Replace when: seal shows wear, cracking, or loss of fit
- Part Number: SST1-CALCAP-10
Specifications
Specifications
-
MPN
-
Product Weight (lbs.)
-
Country of Origin
Reviews
Reviews
Keep your team protected & compliant!
- Expert guidance tailored to your specific needs
- Access responsive customer support when you need it
- Enjoy fast shipping directly to your location
- Benefit from extensive industry knowledge—75+ years of experience
- In-house gas detection calibration & repair services available
