RKI Standby Battery Assembly, 24 VDC, 1.2 AMP Hours 49-8103RK
Description
The RKI Standby Battery Assembly (49-8103RK) provides 24 VDC at 1.2 Amp Hours of backup power for RKI fixed gas detection controllers. Compatible with the Beacon 110 and Beacon 200 wall-mount controllers, this standby battery keeps the system operational during a power interruption — an important requirement for fixed gas detection systems in facilities with continuous monitoring obligations.
Note: This item ships via UPS Ground due to HazMat restrictions and is not available for expedited shipping. Please check your selection carefully before ordering.
Manual:
Product Number:
49-8103RK
PK Safety services RKI Instruments gas monitors in-house with factory-trained technicians — calibration, sensor replacement, bump testing, and full repair. Call 800.829.9580 to speak with a technician.
Related Searches
Batteries And Chargers, Gas Detection, Gas Monitor Parts
Frequently Asked Questions
Which RKI controllers is this standby battery compatible with?
The 49-8103RK is compatible with the RKI Beacon 110 and Beacon 200 fixed gas detection controllers. Verify controller compatibility before ordering. Call 800.829.9580 if unsure which standby battery is correct for a specific system.
Why does this battery ship UPS Ground only?
Lead-acid and sealed rechargeable batteries are regulated as hazardous materials under DOT shipping rules. These restrictions prevent shipment by air or expedited-ground carriers at standard rates. Plan for 3–6 business days transit time via UPS Ground depending on the destination.
How long does the standby battery power the Beacon controller during an outage?
Backup runtime depends on the controller's current draw, the number of sensors connected, and the alarm state. Consult the Beacon 110 or Beacon 200 manual for standby power specifications. The manual for this battery is available above in PDF format. For site-specific backup time calculations, call 800.829.9580.
How often should the standby battery be replaced?
RKI recommends periodic replacement per the maintenance schedule in the Beacon controller manual — typically every 2–3 years, or sooner if the battery fails a capacity test or shows signs of swelling or reduced backup time. Regularly testing backup power as part of a preventive maintenance program helps ensure the fixed gas system remains compliant with facility safety requirements.
Can PK Safety install or service Beacon fixed gas controllers?
PK Safety services RKI fixed gas detection systems, including the Beacon series, with factory-trained technicians. Services include sensor calibration, component replacement, and system inspection. Call 800.829.9580 to discuss a service visit or mail-in repair.
Is this the same battery used in the Beacon 410A or Beacon 800?
No. The 49-8103RK is specified for the Beacon 110 and Beacon 200. The Beacon 410A and Beacon 800 may use different standby battery assemblies. Call 800.829.9580 and reference the controller model to confirm the correct replacement battery part number.
Read more
Description
The RKI Standby Battery Assembly (49-8103RK) provides 24 VDC at 1.2 Amp Hours of backup power for RKI fixed gas detection controllers. Compatible with the Beacon 110 and Beacon 200 wall-mount controllers, this standby battery keeps the system operational during a power interruption — an important requirement for fixed gas detection systems in facilities with continuous monitoring obligations.
Note: This item ships via UPS Ground due to HazMat restrictions and is not available for expedited shipping. Please check your selection carefully before ordering.
Manual:
Product Number:
49-8103RK
PK Safety services RKI Instruments gas monitors in-house with factory-trained technicians — calibration, sensor replacement, bump testing, and full repair. Call 800.829.9580 to speak with a technician.
Related Searches
Batteries And Chargers, Gas Detection, Gas Monitor Parts
Frequently Asked Questions
Which RKI controllers is this standby battery compatible with?
The 49-8103RK is compatible with the RKI Beacon 110 and Beacon 200 fixed gas detection controllers. Verify controller compatibility before ordering. Call 800.829.9580 if unsure which standby battery is correct for a specific system.
Why does this battery ship UPS Ground only?
Lead-acid and sealed rechargeable batteries are regulated as hazardous materials under DOT shipping rules. These restrictions prevent shipment by air or expedited-ground carriers at standard rates. Plan for 3–6 business days transit time via UPS Ground depending on the destination.
How long does the standby battery power the Beacon controller during an outage?
Backup runtime depends on the controller's current draw, the number of sensors connected, and the alarm state. Consult the Beacon 110 or Beacon 200 manual for standby power specifications. The manual for this battery is available above in PDF format. For site-specific backup time calculations, call 800.829.9580.
How often should the standby battery be replaced?
RKI recommends periodic replacement per the maintenance schedule in the Beacon controller manual — typically every 2–3 years, or sooner if the battery fails a capacity test or shows signs of swelling or reduced backup time. Regularly testing backup power as part of a preventive maintenance program helps ensure the fixed gas system remains compliant with facility safety requirements.
Can PK Safety install or service Beacon fixed gas controllers?
PK Safety services RKI fixed gas detection systems, including the Beacon series, with factory-trained technicians. Services include sensor calibration, component replacement, and system inspection. Call 800.829.9580 to discuss a service visit or mail-in repair.
Is this the same battery used in the Beacon 410A or Beacon 800?
No. The 49-8103RK is specified for the Beacon 110 and Beacon 200. The Beacon 410A and Beacon 800 may use different standby battery assemblies. Call 800.829.9580 and reference the controller model to confirm the correct replacement battery part number.
The RKI Standby Battery Assembly (49-8103RK) provides 24 VDC at 1.2 Amp Hours of backup power for RKI fixed gas detection controllers. Compatible with the Beacon 110 and Beacon 200 wall-mount controllers, this standby battery keeps the system operational during a power interruption — an important requirement for fixed gas detection systems in facilities with continuous monitoring obligations.
Note: This item ships via UPS Ground due to HazMat restrictions and is not available for expedited shipping. Please check your selection carefully before ordering.
Manual:
Product Number:
49-8103RK
PK Safety services RKI Instruments gas monitors in-house with factory-trained technicians — calibration, sensor replacement, bump testing, and full repair. Call 800.829.9580 to speak with a technician.
Related Searches
Batteries And Chargers, Gas Detection, Gas Monitor Parts
Frequently Asked Questions
Which RKI controllers is this standby battery compatible with?
The 49-8103RK is compatible with the RKI Beacon 110 and Beacon 200 fixed gas detection controllers. Verify controller compatibility before ordering. Call 800.829.9580 if unsure which standby battery is correct for a specific system.
Why does this battery ship UPS Ground only?
Lead-acid and sealed rechargeable batteries are regulated as hazardous materials under DOT shipping rules. These restrictions prevent shipment by air or expedited-ground carriers at standard rates. Plan for 3–6 business days transit time via UPS Ground depending on the destination.
How long does the standby battery power the Beacon controller during an outage?
Backup runtime depends on the controller's current draw, the number of sensors connected, and the alarm state. Consult the Beacon 110 or Beacon 200 manual for standby power specifications. The manual for this battery is available above in PDF format. For site-specific backup time calculations, call 800.829.9580.
How often should the standby battery be replaced?
RKI recommends periodic replacement per the maintenance schedule in the Beacon controller manual — typically every 2–3 years, or sooner if the battery fails a capacity test or shows signs of swelling or reduced backup time. Regularly testing backup power as part of a preventive maintenance program helps ensure the fixed gas system remains compliant with facility safety requirements.
Can PK Safety install or service Beacon fixed gas controllers?
PK Safety services RKI fixed gas detection systems, including the Beacon series, with factory-trained technicians. Services include sensor calibration, component replacement, and system inspection. Call 800.829.9580 to discuss a service visit or mail-in repair.
Is this the same battery used in the Beacon 410A or Beacon 800?
No. The 49-8103RK is specified for the Beacon 110 and Beacon 200. The Beacon 410A and Beacon 800 may use different standby battery assemblies. Call 800.829.9580 and reference the controller model to confirm the correct replacement battery part number.
Specifications
Specifications
-
Product Weight (lbs.)
-
Height (in.)
-
Length (in.)
-
Width (in.)
Reviews
Reviews
Keep your team protected & compliant!
- Expert guidance tailored to your specific needs
- Access responsive customer support when you need it
- Enjoy fast shipping directly to your location
- Benefit from extensive industry knowledge—75+ years of experience
- In-house gas detection calibration & repair services available
