BW IntelliDoX for Gas Alert Max XT II DX-MAXXT
Description
BW DX-MAXXT IntelliDoX for Gas Alert Max XT II is a bump test and calibration station for GasAlert Max XT II gas detectors that has quick, efficient performance.
The IntelliDoX comes with a complete 2-year warranty.
Key Features:
- Easy set up with no tools required — combine up to 5 modules in just a few minutes
- Expandable to 5 modules — each capable of independent operation while sharing power, calibration gas, and network connection
- Easy bi-directional data transfer — by Ethernet or USB
- Compatible with the Calibration Demand Flow Regulator
Please Note: The BW IntelliDoX Enabler Kit DX-ENBL-NA is required to operate the IntelliDoX Docking Station.
Part Number:
DX-MAXXT
PK Safety services BW Technologies by Honeywell gas monitors in-house with factory-trained technicians. For help selecting the right part or to schedule calibration and repair, call 800.829.9580 or contact us online.
Related Searches
Bw Technologies By Honeywell, Gas Detection Docking Stations, Gas Detection
Frequently Asked Questions
Which gas detectors work with the IntelliDoX DX-MAXXT?
The DX-MAXXT is designed specifically for the BW GasAlert Max XT II (XT-XWHM-Y-NA) multi-gas monitors. For single-gas BW Clip monitors, use the DX-CLIP. For GasAlert MicroClip XL and X3 monitors, use the DX-MCLP. For BW Flex detectors, use the DX-CP.
Is the IntelliDoX Enabler Kit required for the DX-MAXXT?
Yes. The BW IntelliDoX Enabler Kit DX-ENBL-NA is required to operate any IntelliDoX docking station, including the DX-MAXXT. It provides the power supply, AC cord, Ethernet cable, inlet filter assembly, calibration tubing, purge tubing, exhaust tubing, and quick connect fittings. Order both the docking station module and Enabler Kit together.
Can the DX-MAXXT be expanded to handle multiple Max XT II units?
Yes. Up to five DX-MAXXT modules can be combined in a single setup, each operating independently while sharing power, calibration gas, and network connection. This allows automated bump testing and management of up to five GasAlert Max XT II monitors simultaneously, reducing pre-shift preparation time for large crews.
How does the DX-MAXXT transfer data to my compliance management system?
The DX-MAXXT transfers bump test results, peak exposures, alarm events, and compliance records to Honeywell Safety Suite software via Ethernet (network) or USB drive for offline environments. Bi-directional data transfer means the dock can also push configuration updates to connected Max XT II monitors.
What calibration gas does the GasAlert Max XT II use with the DX-MAXXT?
The GasAlert Max XT II requires a 4-gas calibration mix (methane 50% LEL, H2S 25 ppm, CO 100 ppm, O2 18% vol.). Use the BW CG-Q34-4 (34L standard bump test and calibration gas). A demand flow regulator is recommended for controlled gas delivery to the IntelliDoX.
Can PK Safety help set up the IntelliDoX DX-MAXXT for my fleet?
Yes. PK Safety is a BW Technologies / Honeywell Factory Authorized Service Center. Our technicians can assist with IntelliDoX configuration, calibration gas selection, fleet compliance setup, and Safety Suite integration. Call 800.829.9580 for setup support or fleet pricing.
Read more
Description
BW DX-MAXXT IntelliDoX for Gas Alert Max XT II is a bump test and calibration station for GasAlert Max XT II gas detectors that has quick, efficient performance.
The IntelliDoX comes with a complete 2-year warranty.
Key Features:
- Easy set up with no tools required — combine up to 5 modules in just a few minutes
- Expandable to 5 modules — each capable of independent operation while sharing power, calibration gas, and network connection
- Easy bi-directional data transfer — by Ethernet or USB
- Compatible with the Calibration Demand Flow Regulator
Please Note: The BW IntelliDoX Enabler Kit DX-ENBL-NA is required to operate the IntelliDoX Docking Station.
Part Number:
DX-MAXXT
PK Safety services BW Technologies by Honeywell gas monitors in-house with factory-trained technicians. For help selecting the right part or to schedule calibration and repair, call 800.829.9580 or contact us online.
Related Searches
Bw Technologies By Honeywell, Gas Detection Docking Stations, Gas Detection
Frequently Asked Questions
Which gas detectors work with the IntelliDoX DX-MAXXT?
The DX-MAXXT is designed specifically for the BW GasAlert Max XT II (XT-XWHM-Y-NA) multi-gas monitors. For single-gas BW Clip monitors, use the DX-CLIP. For GasAlert MicroClip XL and X3 monitors, use the DX-MCLP. For BW Flex detectors, use the DX-CP.
Is the IntelliDoX Enabler Kit required for the DX-MAXXT?
Yes. The BW IntelliDoX Enabler Kit DX-ENBL-NA is required to operate any IntelliDoX docking station, including the DX-MAXXT. It provides the power supply, AC cord, Ethernet cable, inlet filter assembly, calibration tubing, purge tubing, exhaust tubing, and quick connect fittings. Order both the docking station module and Enabler Kit together.
Can the DX-MAXXT be expanded to handle multiple Max XT II units?
Yes. Up to five DX-MAXXT modules can be combined in a single setup, each operating independently while sharing power, calibration gas, and network connection. This allows automated bump testing and management of up to five GasAlert Max XT II monitors simultaneously, reducing pre-shift preparation time for large crews.
How does the DX-MAXXT transfer data to my compliance management system?
The DX-MAXXT transfers bump test results, peak exposures, alarm events, and compliance records to Honeywell Safety Suite software via Ethernet (network) or USB drive for offline environments. Bi-directional data transfer means the dock can also push configuration updates to connected Max XT II monitors.
What calibration gas does the GasAlert Max XT II use with the DX-MAXXT?
The GasAlert Max XT II requires a 4-gas calibration mix (methane 50% LEL, H2S 25 ppm, CO 100 ppm, O2 18% vol.). Use the BW CG-Q34-4 (34L standard bump test and calibration gas). A demand flow regulator is recommended for controlled gas delivery to the IntelliDoX.
Can PK Safety help set up the IntelliDoX DX-MAXXT for my fleet?
Yes. PK Safety is a BW Technologies / Honeywell Factory Authorized Service Center. Our technicians can assist with IntelliDoX configuration, calibration gas selection, fleet compliance setup, and Safety Suite integration. Call 800.829.9580 for setup support or fleet pricing.
BW DX-MAXXT IntelliDoX for Gas Alert Max XT II is a bump test and calibration station for GasAlert Max XT II gas detectors that has quick, efficient performance.
The IntelliDoX comes with a complete 2-year warranty.
Key Features:
- Easy set up with no tools required — combine up to 5 modules in just a few minutes
- Expandable to 5 modules — each capable of independent operation while sharing power, calibration gas, and network connection
- Easy bi-directional data transfer — by Ethernet or USB
- Compatible with the Calibration Demand Flow Regulator
Please Note: The BW IntelliDoX Enabler Kit DX-ENBL-NA is required to operate the IntelliDoX Docking Station.
Part Number:
DX-MAXXT
PK Safety services BW Technologies by Honeywell gas monitors in-house with factory-trained technicians. For help selecting the right part or to schedule calibration and repair, call 800.829.9580 or contact us online.
Related Searches
Bw Technologies By Honeywell, Gas Detection Docking Stations, Gas Detection
Frequently Asked Questions
Which gas detectors work with the IntelliDoX DX-MAXXT?
The DX-MAXXT is designed specifically for the BW GasAlert Max XT II (XT-XWHM-Y-NA) multi-gas monitors. For single-gas BW Clip monitors, use the DX-CLIP. For GasAlert MicroClip XL and X3 monitors, use the DX-MCLP. For BW Flex detectors, use the DX-CP.
Is the IntelliDoX Enabler Kit required for the DX-MAXXT?
Yes. The BW IntelliDoX Enabler Kit DX-ENBL-NA is required to operate any IntelliDoX docking station, including the DX-MAXXT. It provides the power supply, AC cord, Ethernet cable, inlet filter assembly, calibration tubing, purge tubing, exhaust tubing, and quick connect fittings. Order both the docking station module and Enabler Kit together.
Can the DX-MAXXT be expanded to handle multiple Max XT II units?
Yes. Up to five DX-MAXXT modules can be combined in a single setup, each operating independently while sharing power, calibration gas, and network connection. This allows automated bump testing and management of up to five GasAlert Max XT II monitors simultaneously, reducing pre-shift preparation time for large crews.
How does the DX-MAXXT transfer data to my compliance management system?
The DX-MAXXT transfers bump test results, peak exposures, alarm events, and compliance records to Honeywell Safety Suite software via Ethernet (network) or USB drive for offline environments. Bi-directional data transfer means the dock can also push configuration updates to connected Max XT II monitors.
What calibration gas does the GasAlert Max XT II use with the DX-MAXXT?
The GasAlert Max XT II requires a 4-gas calibration mix (methane 50% LEL, H2S 25 ppm, CO 100 ppm, O2 18% vol.). Use the BW CG-Q34-4 (34L standard bump test and calibration gas). A demand flow regulator is recommended for controlled gas delivery to the IntelliDoX.
Can PK Safety help set up the IntelliDoX DX-MAXXT for my fleet?
Yes. PK Safety is a BW Technologies / Honeywell Factory Authorized Service Center. Our technicians can assist with IntelliDoX configuration, calibration gas selection, fleet compliance setup, and Safety Suite integration. Call 800.829.9580 for setup support or fleet pricing.
Specifications
Specifications
-
Product Weight (lbs.)
-
Height (in.)
-
Length (in.)
-
Width (in.)
-
Country of Origin
Reviews (1)
Reviews (1)
Keep your team protected & compliant!
- Expert guidance tailored to your specific needs
- Access responsive customer support when you need it
- Enjoy fast shipping directly to your location
- Benefit from extensive industry knowledge—75+ years of experience
- In-house gas detection calibration & repair services available
