BW Gasalert Series Sample Probe GA-PROB1-1
Description
The BW GA-PROB1-1 GasAlert Series Sample Probe (1 ft.) enables remote gas sampling for BW GasAlert series detectors with motorized pump capability. The probe arrives with a hydrophobic filter and a particulate filter installed to protect the pump from water and debris during sampling. Use the GA-PROB1-1 to pre-clear confined space atmospheres from a safe standoff position before entry, as required by OSHA 29 CFR 1910.146.
Included with GA-PROB1-1:
- 1 ft. sampling probe
- Hydrophobic filter
- Particulate filter
PK Safety services BW Technologies by Honeywell gas monitors in-house with factory-trained technicians. For help selecting the right part or to schedule calibration and repair, call 800.829.9580 or contact us online.
Part Number:
GA-PROB1-1
Related Searches
Bw Technologies By Honeywell, Gas Detection, Gas Detector Accessories
Frequently Asked Questions
What is the BW GA-PROB1-1 sample probe used for?
The GA-PROB1-1 is a 1 ft. sampling probe for BW GasAlert series gas detectors with motorized pump capability. It allows operators to draw air samples from remote or inaccessible areas — such as confined spaces, tanks, and vaults — before entry, as required by OSHA 29 CFR 1910.146 for permit-required confined space programs.
Which BW monitors is the GA-PROB1-1 compatible with?
The GA-PROB1-1 is compatible with BW GasAlert series detectors that include a motorized pump, including the GasAlert Max XT II. Refer to your monitor's user manual or contact PK Safety at 800.829.9580 to confirm compatibility with your specific model.
What filters are included with the GA-PROB1-1?
The GA-PROB1-1 includes both a hydrophobic filter (to prevent water from entering the pump) and a particulate filter (to block dust and debris). These filters protect the motorized pump from damage and maintain accurate sampling. Replace filters per the BW maintenance schedule or when contamination is visible.
How long is the GA-PROB1-1 sampling probe?
The GA-PROB1-1 probe is 1 ft. (approximately 30 cm) long. For deeper or longer-reach sampling, additional sampling hose extensions can be connected to extend reach. The XT-XWHM-Y-NA-CS confined space kit includes a 10 ft. sampling hose for extended reach applications.
When should I replace the hydrophobic and particulate filters on the GA-PROB1-1?
Replace the hydrophobic and particulate filters whenever they appear wet, discolored, or visibly clogged, or after exposure to heavy contamination. A blocked filter restricts airflow to the pump, which can cause reduced sensor response or false low readings. Replacement filters — such as the XT-RF-H50 hydrophobic filters (50-pack) — are available from PK Safety.
Can PK Safety help me with sampling probes and confined space accessories?
Yes. PK Safety is a BW Technologies by Honeywell Factory Authorized Service Center and authorized reseller of BW confined space accessories. Our gas detection specialists can recommend the right probe, hose, and filter combination for your sampling application. Call 800.829.9580 or chat with a specialist today.
Read more
Description
The BW GA-PROB1-1 GasAlert Series Sample Probe (1 ft.) enables remote gas sampling for BW GasAlert series detectors with motorized pump capability. The probe arrives with a hydrophobic filter and a particulate filter installed to protect the pump from water and debris during sampling. Use the GA-PROB1-1 to pre-clear confined space atmospheres from a safe standoff position before entry, as required by OSHA 29 CFR 1910.146.
Included with GA-PROB1-1:
- 1 ft. sampling probe
- Hydrophobic filter
- Particulate filter
PK Safety services BW Technologies by Honeywell gas monitors in-house with factory-trained technicians. For help selecting the right part or to schedule calibration and repair, call 800.829.9580 or contact us online.
Part Number:
GA-PROB1-1
Related Searches
Bw Technologies By Honeywell, Gas Detection, Gas Detector Accessories
Frequently Asked Questions
What is the BW GA-PROB1-1 sample probe used for?
The GA-PROB1-1 is a 1 ft. sampling probe for BW GasAlert series gas detectors with motorized pump capability. It allows operators to draw air samples from remote or inaccessible areas — such as confined spaces, tanks, and vaults — before entry, as required by OSHA 29 CFR 1910.146 for permit-required confined space programs.
Which BW monitors is the GA-PROB1-1 compatible with?
The GA-PROB1-1 is compatible with BW GasAlert series detectors that include a motorized pump, including the GasAlert Max XT II. Refer to your monitor's user manual or contact PK Safety at 800.829.9580 to confirm compatibility with your specific model.
What filters are included with the GA-PROB1-1?
The GA-PROB1-1 includes both a hydrophobic filter (to prevent water from entering the pump) and a particulate filter (to block dust and debris). These filters protect the motorized pump from damage and maintain accurate sampling. Replace filters per the BW maintenance schedule or when contamination is visible.
How long is the GA-PROB1-1 sampling probe?
The GA-PROB1-1 probe is 1 ft. (approximately 30 cm) long. For deeper or longer-reach sampling, additional sampling hose extensions can be connected to extend reach. The XT-XWHM-Y-NA-CS confined space kit includes a 10 ft. sampling hose for extended reach applications.
When should I replace the hydrophobic and particulate filters on the GA-PROB1-1?
Replace the hydrophobic and particulate filters whenever they appear wet, discolored, or visibly clogged, or after exposure to heavy contamination. A blocked filter restricts airflow to the pump, which can cause reduced sensor response or false low readings. Replacement filters — such as the XT-RF-H50 hydrophobic filters (50-pack) — are available from PK Safety.
Can PK Safety help me with sampling probes and confined space accessories?
Yes. PK Safety is a BW Technologies by Honeywell Factory Authorized Service Center and authorized reseller of BW confined space accessories. Our gas detection specialists can recommend the right probe, hose, and filter combination for your sampling application. Call 800.829.9580 or chat with a specialist today.
The BW GA-PROB1-1 GasAlert Series Sample Probe (1 ft.) enables remote gas sampling for BW GasAlert series detectors with motorized pump capability. The probe arrives with a hydrophobic filter and a particulate filter installed to protect the pump from water and debris during sampling. Use the GA-PROB1-1 to pre-clear confined space atmospheres from a safe standoff position before entry, as required by OSHA 29 CFR 1910.146.
Included with GA-PROB1-1:
- 1 ft. sampling probe
- Hydrophobic filter
- Particulate filter
PK Safety services BW Technologies by Honeywell gas monitors in-house with factory-trained technicians. For help selecting the right part or to schedule calibration and repair, call 800.829.9580 or contact us online.
Part Number:
GA-PROB1-1
Related Searches
Bw Technologies By Honeywell, Gas Detection, Gas Detector Accessories
Frequently Asked Questions
What is the BW GA-PROB1-1 sample probe used for?
The GA-PROB1-1 is a 1 ft. sampling probe for BW GasAlert series gas detectors with motorized pump capability. It allows operators to draw air samples from remote or inaccessible areas — such as confined spaces, tanks, and vaults — before entry, as required by OSHA 29 CFR 1910.146 for permit-required confined space programs.
Which BW monitors is the GA-PROB1-1 compatible with?
The GA-PROB1-1 is compatible with BW GasAlert series detectors that include a motorized pump, including the GasAlert Max XT II. Refer to your monitor's user manual or contact PK Safety at 800.829.9580 to confirm compatibility with your specific model.
What filters are included with the GA-PROB1-1?
The GA-PROB1-1 includes both a hydrophobic filter (to prevent water from entering the pump) and a particulate filter (to block dust and debris). These filters protect the motorized pump from damage and maintain accurate sampling. Replace filters per the BW maintenance schedule or when contamination is visible.
How long is the GA-PROB1-1 sampling probe?
The GA-PROB1-1 probe is 1 ft. (approximately 30 cm) long. For deeper or longer-reach sampling, additional sampling hose extensions can be connected to extend reach. The XT-XWHM-Y-NA-CS confined space kit includes a 10 ft. sampling hose for extended reach applications.
When should I replace the hydrophobic and particulate filters on the GA-PROB1-1?
Replace the hydrophobic and particulate filters whenever they appear wet, discolored, or visibly clogged, or after exposure to heavy contamination. A blocked filter restricts airflow to the pump, which can cause reduced sensor response or false low readings. Replacement filters — such as the XT-RF-H50 hydrophobic filters (50-pack) — are available from PK Safety.
Can PK Safety help me with sampling probes and confined space accessories?
Yes. PK Safety is a BW Technologies by Honeywell Factory Authorized Service Center and authorized reseller of BW confined space accessories. Our gas detection specialists can recommend the right probe, hose, and filter combination for your sampling application. Call 800.829.9580 or chat with a specialist today.
Specifications
Specifications
-
MPN
-
Product Weight (lbs.)
-
Country of Origin
Reviews
Reviews
Keep your team protected & compliant!
- Expert guidance tailored to your specific needs
- Access responsive customer support when you need it
- Enjoy fast shipping directly to your location
- Benefit from extensive industry knowledge—75+ years of experience
- In-house gas detection calibration & repair services available
