BW Honeywell Hydrophobic Pump Filter Replacements XT-RF-H50 (50/Pack)
Description
The BW Honeywell XT-RF-H50 Hydrophobic Pump Filter Replacements (50-pack) fit the BW GasAlert Max XT II SmartSample motorized pump and protect the internal pump from water and dust ingress during remote sampling operations. A clogged or saturated hydrophobic filter restricts airflow to the pump, reducing sample draw volume and potentially causing false-low gas concentration readings. Replacing filters regularly maintains full pump performance and instrument accuracy.
Replacement is simple: unscrew the filter holder, pop in a new XT-RF-H50 filter, and close it back up. Replace filters when dirt or water blockage reduces pump airflow.
50 filters per pack.
PK Safety services BW Technologies by Honeywell gas monitors in-house with factory-trained technicians. For help selecting the right part or to schedule calibration and repair, call 800.829.9580 or contact us online.
Part Number:
XT-RF-H50
Related Searches
Bw Technologies By Honeywell, Filters, Gas Detection, Gas Monitor Parts
Frequently Asked Questions
Which gas monitor does the BW XT-RF-H50 hydrophobic filter fit?
The XT-RF-H50 hydrophobic pump filter is designed for the BW GasAlert Max XT II SmartSample motorized pump. Confirm your monitor model before ordering. For other BW monitor pump filter requirements, contact PK Safety at 800.829.9580.
How many filters are in the XT-RF-H50 pack?
The XT-RF-H50 is sold as a 50-pack, providing a significant maintenance supply for fleet operations. The bulk pack reduces per-filter cost compared to single-unit purchases and ensures you always have replacement filters on hand for regular maintenance intervals.
When should I replace the hydrophobic pump filters on my GasAlert Max XT II?
Replace the XT-RF-H50 filter when you observe reduced pump airflow, visible dirt or moisture saturation on the filter, or when the pump fails to deliver adequate sample draw. In wet or dusty environments, filters may require more frequent replacement. Inspect the filter as part of your pre-shift monitor inspection routine.
How do I install the XT-RF-H50 replacement filter?
Unscrew the pump filter holder on the GasAlert Max XT II, remove the old filter, insert the new XT-RF-H50 filter, and close the filter holder. No tools are required. After replacing the filter, power on the monitor and verify normal pump operation with a bump test before returning the instrument to service.
What happens if I do not replace a clogged hydrophobic pump filter?
A clogged or saturated hydrophobic filter restricts airflow to the SmartSample pump motor, reducing the volume of air sampled across the sensors. This can cause false-low or absent gas concentration readings — a critical safety hazard in confined space and industrial environments. Never use a gas monitor with a visibly clogged filter in a potentially hazardous atmosphere.
Can PK Safety service my GasAlert Max XT II?
Yes. PK Safety is a BW Technologies by Honeywell Factory Authorized Service Center. Our technicians perform factory-authorized calibration, pump maintenance, sensor replacement, and instrument repair for the GasAlert Max XT II. Visit our BW Gas Monitor Calibration Service page or call 800.829.9580.
Read more
Description
The BW Honeywell XT-RF-H50 Hydrophobic Pump Filter Replacements (50-pack) fit the BW GasAlert Max XT II SmartSample motorized pump and protect the internal pump from water and dust ingress during remote sampling operations. A clogged or saturated hydrophobic filter restricts airflow to the pump, reducing sample draw volume and potentially causing false-low gas concentration readings. Replacing filters regularly maintains full pump performance and instrument accuracy.
Replacement is simple: unscrew the filter holder, pop in a new XT-RF-H50 filter, and close it back up. Replace filters when dirt or water blockage reduces pump airflow.
50 filters per pack.
PK Safety services BW Technologies by Honeywell gas monitors in-house with factory-trained technicians. For help selecting the right part or to schedule calibration and repair, call 800.829.9580 or contact us online.
Part Number:
XT-RF-H50
Related Searches
Bw Technologies By Honeywell, Filters, Gas Detection, Gas Monitor Parts
Frequently Asked Questions
Which gas monitor does the BW XT-RF-H50 hydrophobic filter fit?
The XT-RF-H50 hydrophobic pump filter is designed for the BW GasAlert Max XT II SmartSample motorized pump. Confirm your monitor model before ordering. For other BW monitor pump filter requirements, contact PK Safety at 800.829.9580.
How many filters are in the XT-RF-H50 pack?
The XT-RF-H50 is sold as a 50-pack, providing a significant maintenance supply for fleet operations. The bulk pack reduces per-filter cost compared to single-unit purchases and ensures you always have replacement filters on hand for regular maintenance intervals.
When should I replace the hydrophobic pump filters on my GasAlert Max XT II?
Replace the XT-RF-H50 filter when you observe reduced pump airflow, visible dirt or moisture saturation on the filter, or when the pump fails to deliver adequate sample draw. In wet or dusty environments, filters may require more frequent replacement. Inspect the filter as part of your pre-shift monitor inspection routine.
How do I install the XT-RF-H50 replacement filter?
Unscrew the pump filter holder on the GasAlert Max XT II, remove the old filter, insert the new XT-RF-H50 filter, and close the filter holder. No tools are required. After replacing the filter, power on the monitor and verify normal pump operation with a bump test before returning the instrument to service.
What happens if I do not replace a clogged hydrophobic pump filter?
A clogged or saturated hydrophobic filter restricts airflow to the SmartSample pump motor, reducing the volume of air sampled across the sensors. This can cause false-low or absent gas concentration readings — a critical safety hazard in confined space and industrial environments. Never use a gas monitor with a visibly clogged filter in a potentially hazardous atmosphere.
Can PK Safety service my GasAlert Max XT II?
Yes. PK Safety is a BW Technologies by Honeywell Factory Authorized Service Center. Our technicians perform factory-authorized calibration, pump maintenance, sensor replacement, and instrument repair for the GasAlert Max XT II. Visit our BW Gas Monitor Calibration Service page or call 800.829.9580.
The BW Honeywell XT-RF-H50 Hydrophobic Pump Filter Replacements (50-pack) fit the BW GasAlert Max XT II SmartSample motorized pump and protect the internal pump from water and dust ingress during remote sampling operations. A clogged or saturated hydrophobic filter restricts airflow to the pump, reducing sample draw volume and potentially causing false-low gas concentration readings. Replacing filters regularly maintains full pump performance and instrument accuracy.
Replacement is simple: unscrew the filter holder, pop in a new XT-RF-H50 filter, and close it back up. Replace filters when dirt or water blockage reduces pump airflow.
50 filters per pack.
PK Safety services BW Technologies by Honeywell gas monitors in-house with factory-trained technicians. For help selecting the right part or to schedule calibration and repair, call 800.829.9580 or contact us online.
Part Number:
XT-RF-H50
Related Searches
Bw Technologies By Honeywell, Filters, Gas Detection, Gas Monitor Parts
Frequently Asked Questions
Which gas monitor does the BW XT-RF-H50 hydrophobic filter fit?
The XT-RF-H50 hydrophobic pump filter is designed for the BW GasAlert Max XT II SmartSample motorized pump. Confirm your monitor model before ordering. For other BW monitor pump filter requirements, contact PK Safety at 800.829.9580.
How many filters are in the XT-RF-H50 pack?
The XT-RF-H50 is sold as a 50-pack, providing a significant maintenance supply for fleet operations. The bulk pack reduces per-filter cost compared to single-unit purchases and ensures you always have replacement filters on hand for regular maintenance intervals.
When should I replace the hydrophobic pump filters on my GasAlert Max XT II?
Replace the XT-RF-H50 filter when you observe reduced pump airflow, visible dirt or moisture saturation on the filter, or when the pump fails to deliver adequate sample draw. In wet or dusty environments, filters may require more frequent replacement. Inspect the filter as part of your pre-shift monitor inspection routine.
How do I install the XT-RF-H50 replacement filter?
Unscrew the pump filter holder on the GasAlert Max XT II, remove the old filter, insert the new XT-RF-H50 filter, and close the filter holder. No tools are required. After replacing the filter, power on the monitor and verify normal pump operation with a bump test before returning the instrument to service.
What happens if I do not replace a clogged hydrophobic pump filter?
A clogged or saturated hydrophobic filter restricts airflow to the SmartSample pump motor, reducing the volume of air sampled across the sensors. This can cause false-low or absent gas concentration readings — a critical safety hazard in confined space and industrial environments. Never use a gas monitor with a visibly clogged filter in a potentially hazardous atmosphere.
Can PK Safety service my GasAlert Max XT II?
Yes. PK Safety is a BW Technologies by Honeywell Factory Authorized Service Center. Our technicians perform factory-authorized calibration, pump maintenance, sensor replacement, and instrument repair for the GasAlert Max XT II. Visit our BW Gas Monitor Calibration Service page or call 800.829.9580.
Specifications
Specifications
-
Product Weight (lbs.)
-
Height (in.)
-
Length (in.)
-
Width (in.)
-
Country of Origin
Reviews
Reviews
Keep your team protected & compliant!
- Expert guidance tailored to your specific needs
- Access responsive customer support when you need it
- Enjoy fast shipping directly to your location
- Benefit from extensive industry knowledge—75+ years of experience
- In-house gas detection calibration & repair services available
