BW Clip 2 Year H2S 5-15 Single Gas Detector BWC2-H515
Description
The 2-Year BW Clip H2S 5ppm–15ppm is a maintenance-free, single gas detector for hydrogen sulfide. It has an alarm setpoint range from 1.6 ppm to 20 ppm, and a full measuring range of 0–100 ppm.
As your every day companion for hazardous environments, the BW Clip has everything you need — plus new features to make your gas detection easier, safer, and more reliable.
Just turn on the device and it runs continuously — no need for calibration, sensor replacement, battery replacement or battery charging. That means great reliability and no downtime.
With the two-year BW Clip for H2S or CO, you can use the BW Clip Hibernation Case when you're not using it for a week or more and extend its life by that period of time, up to 12 months.
Use the hands-free Hard Hat Clip carrying accessory GA-HC-1 with any of the BW single gas monitors.
BW Clip Standard Features:
- Maintenance-free: no sensor or battery changes necessary
- Compact, lightweight design with one-button operation
- Designed for a range of harsh environments and extreme temperatures
- Hibernation mode with case accessory or IntelliDoX
- Automated self-test of battery, sensor and electronics
- Wide-angle flash, which alerts simultaneously with audible and vibrating alarm
- Automatic logging of the 35 most recent gas events and bump test results
- IP 66/67 — can be submerged up to 1 meter
- Default alarm setpoints at 5 ppm and 15 ppm
- Alarm setpoints range: 1.6 ppm to 20 ppm
- Detector measuring range: 0–100 ppm
- Affordable, with low cost of ownership
- 2-year maintenance free
Unit Includes:
- Detector complete with specified sensor, stainless steel alligator clip and concussion-proof housing
- Calibration/test cap and hose
- Manual
Advanced Technology for Safety Compliance and Productivity:
- Unique dual reservoir sensor design dramatically improves instrument performance, response time, and longevity compared to traditional electrochemical sensors and consistently delivers reliable instrument performance under the harshest environmental conditions
- Reflex Technology advanced automated self-test function routinely checks the operating condition of the sensor to increase safety, up-time, and overall worker confidence
BW Clip Specifications:
- Weight: 0.30 lbs.
- Temperature: -40 to 122°F
- Humidity: 5–95% RH (non-condensing)
- Alarms: Visual, vibrating, and audible
- Typical Battery Life: Two years
Regulatory Note: The OSHA PEL for hydrogen sulfide is 20 ppm ceiling (29 CFR 1910.1000, Table Z-2). The default setpoints (5 ppm low / 15 ppm high) align with NIOSH TWA and ACGIH TLV recommendations. Employers must verify applicable regulatory limits for their operations. See 29 CFR 1910.146 for confined space entry requirements.
Please Note: MM and DD denote the number of months and days left before the gas monitor expires. This monitor does not have a digital display of the gas concentration. Once activated, these units cannot be shut down and will continue to run for their two-year life span, prohibiting these items from being shipped because the alarm may be activated during transit. Additionally, these items are unable to be resold after activation.
Part Number:
BWC2-H515 2 Year H2S 5-15
PK Safety services BW Technologies by Honeywell gas monitors in-house with factory-trained technicians. For help selecting the right part or to schedule calibration and repair, call 800.829.9580 or contact us online.
Related Searches
Bw Technologies By Honeywell, Clearance, Gas Detection, H2S Gas Monitors, Limited Time Offers, Portable Gas Monitors And Detectors, Single-Gas Monitors
Frequently Asked Questions
What sets the BWC2-H515 apart from the BWC2-H510?
Both are 2-year maintenance-free H2S monitors with the same 0–100 ppm measuring range. The BWC2-H515 uses default setpoints of 5 ppm (low) and 15 ppm (high), while the BWC2-H510 alarms at 5 ppm and 10 ppm. The BWC2-H515's higher upper setpoint is often preferred in industries where the 10-ppm ceiling requirement applies. Contact PK Safety at 800.829.9580 to select the right setpoints for your application.
Does the BW Clip BWC2-H515 need calibration or sensor replacement?
No. The BWC2-H515 is truly maintenance-free for its two-year lifespan — no calibration, sensor replacement, or battery changes required. Reflex Technology automated self-tests continuously verify sensor and battery condition. For bump tests, use the included test cap and hose with an appropriate H2S test gas.
What alarm setpoint range can be configured on the BWC2-H515?
The BWC2-H515 supports an alarm setpoint range of 1.6 ppm to 20 ppm. Using the BW IntelliDoX DX-CLIP docking station, you can configure alarm setpoints before or during the device's lifespan. The IntelliDoX Enabler Kit DX-ENBL-NA is required for IntelliDoX operation.
Is the BW Clip BWC2-H515 rated for use in wet or outdoor environments?
Yes. The BWC2-H515 carries an IP 66/67 rating, providing full dust protection and resistance to water immersion up to 1 meter. It operates reliably from -40 to 122°F, making it suitable for offshore, chemical plants, sewers, confined spaces, and outdoor worksites.
Can I extend the life of the BWC2-H515 when it is not in use?
Yes. Place the unit in the BW Clip Hibernation Case when not in use for a week or more to pause the internal clock. This can extend the detector's useful life by up to 12 months beyond the standard two-year period.
What accessories are compatible with the BWC2-H515?
Compatible accessories include the Hard Hat Clip GA-HC-1 for hands-free wearing, the Hibernation Case CLIPHB-CASE for storage, and the IntelliDoX DX-CLIP for automated bump testing and alarm configuration. For calibration gas needs or service, call PK Safety at 800.829.9580.
Read more
Description
The 2-Year BW Clip H2S 5ppm–15ppm is a maintenance-free, single gas detector for hydrogen sulfide. It has an alarm setpoint range from 1.6 ppm to 20 ppm, and a full measuring range of 0–100 ppm.
As your every day companion for hazardous environments, the BW Clip has everything you need — plus new features to make your gas detection easier, safer, and more reliable.
Just turn on the device and it runs continuously — no need for calibration, sensor replacement, battery replacement or battery charging. That means great reliability and no downtime.
With the two-year BW Clip for H2S or CO, you can use the BW Clip Hibernation Case when you're not using it for a week or more and extend its life by that period of time, up to 12 months.
Use the hands-free Hard Hat Clip carrying accessory GA-HC-1 with any of the BW single gas monitors.
BW Clip Standard Features:
- Maintenance-free: no sensor or battery changes necessary
- Compact, lightweight design with one-button operation
- Designed for a range of harsh environments and extreme temperatures
- Hibernation mode with case accessory or IntelliDoX
- Automated self-test of battery, sensor and electronics
- Wide-angle flash, which alerts simultaneously with audible and vibrating alarm
- Automatic logging of the 35 most recent gas events and bump test results
- IP 66/67 — can be submerged up to 1 meter
- Default alarm setpoints at 5 ppm and 15 ppm
- Alarm setpoints range: 1.6 ppm to 20 ppm
- Detector measuring range: 0–100 ppm
- Affordable, with low cost of ownership
- 2-year maintenance free
Unit Includes:
- Detector complete with specified sensor, stainless steel alligator clip and concussion-proof housing
- Calibration/test cap and hose
- Manual
Advanced Technology for Safety Compliance and Productivity:
- Unique dual reservoir sensor design dramatically improves instrument performance, response time, and longevity compared to traditional electrochemical sensors and consistently delivers reliable instrument performance under the harshest environmental conditions
- Reflex Technology advanced automated self-test function routinely checks the operating condition of the sensor to increase safety, up-time, and overall worker confidence
BW Clip Specifications:
- Weight: 0.30 lbs.
- Temperature: -40 to 122°F
- Humidity: 5–95% RH (non-condensing)
- Alarms: Visual, vibrating, and audible
- Typical Battery Life: Two years
Regulatory Note: The OSHA PEL for hydrogen sulfide is 20 ppm ceiling (29 CFR 1910.1000, Table Z-2). The default setpoints (5 ppm low / 15 ppm high) align with NIOSH TWA and ACGIH TLV recommendations. Employers must verify applicable regulatory limits for their operations. See 29 CFR 1910.146 for confined space entry requirements.
Please Note: MM and DD denote the number of months and days left before the gas monitor expires. This monitor does not have a digital display of the gas concentration. Once activated, these units cannot be shut down and will continue to run for their two-year life span, prohibiting these items from being shipped because the alarm may be activated during transit. Additionally, these items are unable to be resold after activation.
Part Number:
BWC2-H515 2 Year H2S 5-15
PK Safety services BW Technologies by Honeywell gas monitors in-house with factory-trained technicians. For help selecting the right part or to schedule calibration and repair, call 800.829.9580 or contact us online.
Related Searches
Bw Technologies By Honeywell, Clearance, Gas Detection, H2S Gas Monitors, Limited Time Offers, Portable Gas Monitors And Detectors, Single-Gas Monitors
Frequently Asked Questions
What sets the BWC2-H515 apart from the BWC2-H510?
Both are 2-year maintenance-free H2S monitors with the same 0–100 ppm measuring range. The BWC2-H515 uses default setpoints of 5 ppm (low) and 15 ppm (high), while the BWC2-H510 alarms at 5 ppm and 10 ppm. The BWC2-H515's higher upper setpoint is often preferred in industries where the 10-ppm ceiling requirement applies. Contact PK Safety at 800.829.9580 to select the right setpoints for your application.
Does the BW Clip BWC2-H515 need calibration or sensor replacement?
No. The BWC2-H515 is truly maintenance-free for its two-year lifespan — no calibration, sensor replacement, or battery changes required. Reflex Technology automated self-tests continuously verify sensor and battery condition. For bump tests, use the included test cap and hose with an appropriate H2S test gas.
What alarm setpoint range can be configured on the BWC2-H515?
The BWC2-H515 supports an alarm setpoint range of 1.6 ppm to 20 ppm. Using the BW IntelliDoX DX-CLIP docking station, you can configure alarm setpoints before or during the device's lifespan. The IntelliDoX Enabler Kit DX-ENBL-NA is required for IntelliDoX operation.
Is the BW Clip BWC2-H515 rated for use in wet or outdoor environments?
Yes. The BWC2-H515 carries an IP 66/67 rating, providing full dust protection and resistance to water immersion up to 1 meter. It operates reliably from -40 to 122°F, making it suitable for offshore, chemical plants, sewers, confined spaces, and outdoor worksites.
Can I extend the life of the BWC2-H515 when it is not in use?
Yes. Place the unit in the BW Clip Hibernation Case when not in use for a week or more to pause the internal clock. This can extend the detector's useful life by up to 12 months beyond the standard two-year period.
What accessories are compatible with the BWC2-H515?
Compatible accessories include the Hard Hat Clip GA-HC-1 for hands-free wearing, the Hibernation Case CLIPHB-CASE for storage, and the IntelliDoX DX-CLIP for automated bump testing and alarm configuration. For calibration gas needs or service, call PK Safety at 800.829.9580.
The 2-Year BW Clip H2S 5ppm–15ppm is a maintenance-free, single gas detector for hydrogen sulfide. It has an alarm setpoint range from 1.6 ppm to 20 ppm, and a full measuring range of 0–100 ppm.
As your every day companion for hazardous environments, the BW Clip has everything you need — plus new features to make your gas detection easier, safer, and more reliable.
Just turn on the device and it runs continuously — no need for calibration, sensor replacement, battery replacement or battery charging. That means great reliability and no downtime.
With the two-year BW Clip for H2S or CO, you can use the BW Clip Hibernation Case when you're not using it for a week or more and extend its life by that period of time, up to 12 months.
Use the hands-free Hard Hat Clip carrying accessory GA-HC-1 with any of the BW single gas monitors.
BW Clip Standard Features:
- Maintenance-free: no sensor or battery changes necessary
- Compact, lightweight design with one-button operation
- Designed for a range of harsh environments and extreme temperatures
- Hibernation mode with case accessory or IntelliDoX
- Automated self-test of battery, sensor and electronics
- Wide-angle flash, which alerts simultaneously with audible and vibrating alarm
- Automatic logging of the 35 most recent gas events and bump test results
- IP 66/67 — can be submerged up to 1 meter
- Default alarm setpoints at 5 ppm and 15 ppm
- Alarm setpoints range: 1.6 ppm to 20 ppm
- Detector measuring range: 0–100 ppm
- Affordable, with low cost of ownership
- 2-year maintenance free
Unit Includes:
- Detector complete with specified sensor, stainless steel alligator clip and concussion-proof housing
- Calibration/test cap and hose
- Manual
Advanced Technology for Safety Compliance and Productivity:
- Unique dual reservoir sensor design dramatically improves instrument performance, response time, and longevity compared to traditional electrochemical sensors and consistently delivers reliable instrument performance under the harshest environmental conditions
- Reflex Technology advanced automated self-test function routinely checks the operating condition of the sensor to increase safety, up-time, and overall worker confidence
BW Clip Specifications:
- Weight: 0.30 lbs.
- Temperature: -40 to 122°F
- Humidity: 5–95% RH (non-condensing)
- Alarms: Visual, vibrating, and audible
- Typical Battery Life: Two years
Regulatory Note: The OSHA PEL for hydrogen sulfide is 20 ppm ceiling (29 CFR 1910.1000, Table Z-2). The default setpoints (5 ppm low / 15 ppm high) align with NIOSH TWA and ACGIH TLV recommendations. Employers must verify applicable regulatory limits for their operations. See 29 CFR 1910.146 for confined space entry requirements.
Please Note: MM and DD denote the number of months and days left before the gas monitor expires. This monitor does not have a digital display of the gas concentration. Once activated, these units cannot be shut down and will continue to run for their two-year life span, prohibiting these items from being shipped because the alarm may be activated during transit. Additionally, these items are unable to be resold after activation.
Part Number:
BWC2-H515 2 Year H2S 5-15
PK Safety services BW Technologies by Honeywell gas monitors in-house with factory-trained technicians. For help selecting the right part or to schedule calibration and repair, call 800.829.9580 or contact us online.
Related Searches
Bw Technologies By Honeywell, Clearance, Gas Detection, H2S Gas Monitors, Limited Time Offers, Portable Gas Monitors And Detectors, Single-Gas Monitors
Frequently Asked Questions
What sets the BWC2-H515 apart from the BWC2-H510?
Both are 2-year maintenance-free H2S monitors with the same 0–100 ppm measuring range. The BWC2-H515 uses default setpoints of 5 ppm (low) and 15 ppm (high), while the BWC2-H510 alarms at 5 ppm and 10 ppm. The BWC2-H515's higher upper setpoint is often preferred in industries where the 10-ppm ceiling requirement applies. Contact PK Safety at 800.829.9580 to select the right setpoints for your application.
Does the BW Clip BWC2-H515 need calibration or sensor replacement?
No. The BWC2-H515 is truly maintenance-free for its two-year lifespan — no calibration, sensor replacement, or battery changes required. Reflex Technology automated self-tests continuously verify sensor and battery condition. For bump tests, use the included test cap and hose with an appropriate H2S test gas.
What alarm setpoint range can be configured on the BWC2-H515?
The BWC2-H515 supports an alarm setpoint range of 1.6 ppm to 20 ppm. Using the BW IntelliDoX DX-CLIP docking station, you can configure alarm setpoints before or during the device's lifespan. The IntelliDoX Enabler Kit DX-ENBL-NA is required for IntelliDoX operation.
Is the BW Clip BWC2-H515 rated for use in wet or outdoor environments?
Yes. The BWC2-H515 carries an IP 66/67 rating, providing full dust protection and resistance to water immersion up to 1 meter. It operates reliably from -40 to 122°F, making it suitable for offshore, chemical plants, sewers, confined spaces, and outdoor worksites.
Can I extend the life of the BWC2-H515 when it is not in use?
Yes. Place the unit in the BW Clip Hibernation Case when not in use for a week or more to pause the internal clock. This can extend the detector's useful life by up to 12 months beyond the standard two-year period.
What accessories are compatible with the BWC2-H515?
Compatible accessories include the Hard Hat Clip GA-HC-1 for hands-free wearing, the Hibernation Case CLIPHB-CASE for storage, and the IntelliDoX DX-CLIP for automated bump testing and alarm configuration. For calibration gas needs or service, call PK Safety at 800.829.9580.
Specifications
Specifications
-
Type
-
Gas Type
-
Color
-
Product Weight (lbs.)
-
Height (in.)
-
Length (in.)
-
Width (in.)
-
Country of Origin
Reviews
Reviews
Keep your team protected & compliant!
- Expert guidance tailored to your specific needs
- Access responsive customer support when you need it
- Enjoy fast shipping directly to your location
- Benefit from extensive industry knowledge—75+ years of experience
- In-house gas detection calibration & repair services available
