SKU: BW01-BWC2-H510

BW Clip 2 Year H2S 5-10 Single Gas Detector BWC2-H510

$110.00

Ships next business day

Description

The 2-Year BW Clip H2S 5ppm–10ppm is a maintenance-free, single gas detector. As your every day companion for hazardous environments, the BW Clip has everything you need — plus new features to make your gas detection easier, safer, and more reliable. The device runs continuously — no need for calibration, sensor replacement, battery replacement or battery charging. That means great reliability and no downtime.

With the two-year BW Clip for H2S or CO, you can use the BW Clip Hibernation Case when you're not using it for a week or more and extend its life by that period of time, up to 12 months.

Use the hands-free Hard Hat Clip carrying accessory GA-HC-1 with any of the BW single gas monitors.

BW Clip Standard Features:

Maintenance-free: no sensor or battery changes necessary
Compact, lightweight design with one-button operation
Designed for a range of harsh environments and extreme temperatures
Hibernation mode with case accessory or IntelliDoX
Automated self-test of battery, sensor and electronics
Wide-angle flash, which alerts simultaneously with audible and vibrating alarm
Automatic logging of the 35 most recent gas events and bump test results
IP 66/67 — can be submerged up to 1 meter
Extended event log — up to 35 events
Automated self-test
Affordable, with low cost of ownership
2-year maintenance free

Unit Includes:

Detector complete with specified sensor, stainless steel alligator clip and concussion-proof housing
Calibration/test cap and hose
Manual

Advanced Technology for Safety Compliance and Productivity:

Unique dual reservoir sensor design dramatically improves instrument performance, response time, and longevity compared to traditional electrochemical sensors and consistently delivers reliable instrument performance under the harshest environmental conditions
Reflex Technology advanced automated self-test function routinely checks the operating condition of the sensor to increase safety, up-time, and overall worker confidence

BW Clip Specifications:

Weight: 0.30 lbs.
Temperature: -40 to 122°F
Humidity: 5–95% RH (non-condensing)
Alarms: Visual, vibrating, and audible
Typical Battery Life: Two years

Regulatory Note: The OSHA PEL for hydrogen sulfide is 20 ppm ceiling (29 CFR 1910.1000, Table Z-2). The NIOSH REL is 1 ppm ceiling (10-min). The default alarm setpoints (5 ppm low, 10 ppm high) on the BWC2-H510 provide early warning. Employers must verify setpoints comply with all applicable regulations for their operations under 29 CFR 1910.146 for confined space entry.

Please Note: MM and DD denote the number of months and days left before the gas monitor expires. This monitor does not have a digital display of the gas concentration. Once activated, these units cannot be shut down and will continue to run for their two-year life span, prohibiting these items from being shipped because the alarm may be activated during transit. Additionally, these items are unable to be resold after activation.

Part Number:
BWC2-H510 2 Year H2S 5-10

PK Safety services BW Technologies by Honeywell gas monitors in-house with factory-trained technicians. For help selecting the right part or to schedule calibration and repair, call 800.829.9580 or contact us online.

Frequently Asked Questions

What is the difference between the BWC2-H510 and the standard BW Clip H2S (BWC2-H)?

The BWC2-H has default alarm setpoints at 10 ppm (low) and 15 ppm (high) for H2S. The BWC2-H510 is configured with lower setpoints at 5 ppm (low) and 10 ppm (high), suitable for environments requiring earlier warning or stricter exposure controls, such as wastewater treatment or pulp and paper facilities. Both units are maintenance-free for two years.

Does the BWC2-H510 need calibration?

No. Like all BW Clip monitors, the BWC2-H510 is truly maintenance-free for its two-year lifespan. No calibration, sensor replacement, or battery changes are required. The onboard Reflex Technology automated self-test continuously verifies sensor integrity. For bump testing, use the included calibration cap and hose with an appropriate H2S test gas.

Can the alarm setpoints be adjusted on the BWC2-H510?

Yes, with the BW IntelliDoX DX-CLIP docking station, you can configure high and low alarm setpoints before or after activation, within the adjustable range. The IntelliDoX Enabler Kit DX-ENBL-NA is required to operate the IntelliDoX.

Is the BWC2-H510 suitable for oil and gas applications?

Yes. The BWC2-H510 H2S monitor is well suited for oil and gas, petrochemical, wastewater, and pulp and paper operations where H2S is a hazard. Its IP 66/67 rating protects against water immersion and dust. The compact design is suitable for belt-clip or hard hat wearing via the Hard Hat Clip GA-HC-1.

What is the measuring range of the BWC2-H510?

The BWC2-H510 measures hydrogen sulfide from 0 to 100 ppm. The alarm setpoint range is 1.6 ppm to 20 ppm (set at 5 ppm low / 10 ppm high). The dual reservoir sensor design provides reliable performance at extreme temperatures (-40 to 122°F).

How do I extend the life of my BWC2-H510?

Use the BW Clip Hibernation Case whenever the monitor is idle for a week or more. This pauses the clock and can extend the unit's life by up to 12 additional months beyond the standard two-year period. Call PK Safety at 800.829.9580 for ordering support.