BW 4-Gas 58L Calibration Mix CG-Q58-4
Description
BW CG-Q58-4 standard bump test and calibration gas for BW Honeywell gas detection units contains specific gas concentrations in a 58-liter cylinder — providing more calibrations per cylinder than the 34L version for higher-volume users.
Gas Concentrations:
- Methane (CH4) — 2.5%
- Oxygen (O2) — 18.0%
- Hydrogen sulfide (H2S) — 25 ppm
- Carbon monoxide (CO) — 100 ppm
Note: This item ships via UPS Ground due to HazMat restrictions and is not available for expedited shipping. Calibration gas is not returnable. Please check your selection carefully before ordering. BW 4-gas calibration mix has a shelf life of two years. Do not use expired gas to calibrate or bump test a monitor.
Regulatory Note: Per OSHA 29 CFR 1910.1000 Table Z-1, the PEL for CO is 50 ppm; for H2S, the ceiling is 20 ppm per Table Z-2. Employers operating permit-required confined spaces per 29 CFR 1910.146 must maintain calibrated gas detection equipment at all times.
For the following monitors:
- GasAlert Quattro
- GasAlert Max XT II
- GasAlertMicro 5
- GasAlertMicro 5 PID
- GasAlertMicroClip XL
- GasAlertMicroClip X3
Note: The Micro 5 PID also requires Isobutylene Calibration Gas.
FAQs: How Often Do I Need To Calibrate My Monitor?
PK Safety services BW Technologies by Honeywell gas monitors in-house with factory-trained technicians. For help selecting the right part or to schedule calibration and repair, call 800.829.9580 or contact us online.
Part Numbers:
CG-Q58-4
Related Searches
Bw Technologies By Honeywell, Calibration Gas, Gas Detection
Frequently Asked Questions
What monitors is the BW CG-Q58-4 compatible with?
The CG-Q58-4 is compatible with the GasAlert Max XT II, GasAlertMicroClip XL, GasAlertMicroClip X3, GasAlert Quattro, GasAlertMicro 5, and GasAlertMicro 5 PID (the PID model also requires Isobutylene Calibration Gas). Always verify compatibility with your instrument's calibration manual before ordering.
Why choose the 58L CG-Q58-4 instead of the 34L CG-Q34-4?
The 58L cylinder provides roughly 70% more gas per cylinder compared to the 34L CG-Q34-4, making it cost-effective for facilities with multiple gas monitors or high bump-test frequency. For most operations with one to three monitors, the 34L is sufficient. Call 800.829.9580 and our gas detection specialists will help you calculate the right cylinder size.
Can the CG-Q58-4 be used for bump testing?
Yes. The CG-Q58-4 is suitable for both functional bump tests and full calibration procedures. Pair it with the BW Demand Flow Regulator REG-DF-1 for automated IntelliDoX calibrations, or the Fixed Flow Regulator REG-0.5 LPM for manual procedures on diffusion-type monitors.
Is the CG-Q58-4 available for expedited shipping?
No. Compressed calibration gas is classified as HazMat and must ship via UPS Ground only. Expedited or air freight is not available. Calibration gas is also non-returnable. Plan purchases 5–7 business days ahead of need to ensure continuity of your gas detection program.
What is the shelf life of the BW CG-Q58-4?
The BW CG-Q58-4 has a two-year shelf life from the fill date printed on the cylinder label. Do not use expired gas to bump test or calibrate a monitor — doing so may produce inaccurate sensor readings and invalidate compliance records. Store cylinders upright in a cool, dry location below 120°F away from heat sources and direct sunlight.
Can PK Safety help me select the right calibration gas for my fleet?
Yes. PK Safety is an authorized BW Technologies by Honeywell reseller and Factory Authorized Service Center. Our gas detection specialists can recommend the right calibration gas cylinder size and regulator combination for your specific monitors and usage frequency. Call 800.829.9580 or visit our BW Honeywell Gas Monitor Calibration Service page.
Read more
Description
BW CG-Q58-4 standard bump test and calibration gas for BW Honeywell gas detection units contains specific gas concentrations in a 58-liter cylinder — providing more calibrations per cylinder than the 34L version for higher-volume users.
Gas Concentrations:
- Methane (CH4) — 2.5%
- Oxygen (O2) — 18.0%
- Hydrogen sulfide (H2S) — 25 ppm
- Carbon monoxide (CO) — 100 ppm
Note: This item ships via UPS Ground due to HazMat restrictions and is not available for expedited shipping. Calibration gas is not returnable. Please check your selection carefully before ordering. BW 4-gas calibration mix has a shelf life of two years. Do not use expired gas to calibrate or bump test a monitor.
Regulatory Note: Per OSHA 29 CFR 1910.1000 Table Z-1, the PEL for CO is 50 ppm; for H2S, the ceiling is 20 ppm per Table Z-2. Employers operating permit-required confined spaces per 29 CFR 1910.146 must maintain calibrated gas detection equipment at all times.
For the following monitors:
- GasAlert Quattro
- GasAlert Max XT II
- GasAlertMicro 5
- GasAlertMicro 5 PID
- GasAlertMicroClip XL
- GasAlertMicroClip X3
Note: The Micro 5 PID also requires Isobutylene Calibration Gas.
FAQs: How Often Do I Need To Calibrate My Monitor?
PK Safety services BW Technologies by Honeywell gas monitors in-house with factory-trained technicians. For help selecting the right part or to schedule calibration and repair, call 800.829.9580 or contact us online.
Part Numbers:
CG-Q58-4
Related Searches
Bw Technologies By Honeywell, Calibration Gas, Gas Detection
Frequently Asked Questions
What monitors is the BW CG-Q58-4 compatible with?
The CG-Q58-4 is compatible with the GasAlert Max XT II, GasAlertMicroClip XL, GasAlertMicroClip X3, GasAlert Quattro, GasAlertMicro 5, and GasAlertMicro 5 PID (the PID model also requires Isobutylene Calibration Gas). Always verify compatibility with your instrument's calibration manual before ordering.
Why choose the 58L CG-Q58-4 instead of the 34L CG-Q34-4?
The 58L cylinder provides roughly 70% more gas per cylinder compared to the 34L CG-Q34-4, making it cost-effective for facilities with multiple gas monitors or high bump-test frequency. For most operations with one to three monitors, the 34L is sufficient. Call 800.829.9580 and our gas detection specialists will help you calculate the right cylinder size.
Can the CG-Q58-4 be used for bump testing?
Yes. The CG-Q58-4 is suitable for both functional bump tests and full calibration procedures. Pair it with the BW Demand Flow Regulator REG-DF-1 for automated IntelliDoX calibrations, or the Fixed Flow Regulator REG-0.5 LPM for manual procedures on diffusion-type monitors.
Is the CG-Q58-4 available for expedited shipping?
No. Compressed calibration gas is classified as HazMat and must ship via UPS Ground only. Expedited or air freight is not available. Calibration gas is also non-returnable. Plan purchases 5–7 business days ahead of need to ensure continuity of your gas detection program.
What is the shelf life of the BW CG-Q58-4?
The BW CG-Q58-4 has a two-year shelf life from the fill date printed on the cylinder label. Do not use expired gas to bump test or calibrate a monitor — doing so may produce inaccurate sensor readings and invalidate compliance records. Store cylinders upright in a cool, dry location below 120°F away from heat sources and direct sunlight.
Can PK Safety help me select the right calibration gas for my fleet?
Yes. PK Safety is an authorized BW Technologies by Honeywell reseller and Factory Authorized Service Center. Our gas detection specialists can recommend the right calibration gas cylinder size and regulator combination for your specific monitors and usage frequency. Call 800.829.9580 or visit our BW Honeywell Gas Monitor Calibration Service page.
BW CG-Q58-4 standard bump test and calibration gas for BW Honeywell gas detection units contains specific gas concentrations in a 58-liter cylinder — providing more calibrations per cylinder than the 34L version for higher-volume users.
Gas Concentrations:
- Methane (CH4) — 2.5%
- Oxygen (O2) — 18.0%
- Hydrogen sulfide (H2S) — 25 ppm
- Carbon monoxide (CO) — 100 ppm
Note: This item ships via UPS Ground due to HazMat restrictions and is not available for expedited shipping. Calibration gas is not returnable. Please check your selection carefully before ordering. BW 4-gas calibration mix has a shelf life of two years. Do not use expired gas to calibrate or bump test a monitor.
Regulatory Note: Per OSHA 29 CFR 1910.1000 Table Z-1, the PEL for CO is 50 ppm; for H2S, the ceiling is 20 ppm per Table Z-2. Employers operating permit-required confined spaces per 29 CFR 1910.146 must maintain calibrated gas detection equipment at all times.
For the following monitors:
- GasAlert Quattro
- GasAlert Max XT II
- GasAlertMicro 5
- GasAlertMicro 5 PID
- GasAlertMicroClip XL
- GasAlertMicroClip X3
Note: The Micro 5 PID also requires Isobutylene Calibration Gas.
FAQs: How Often Do I Need To Calibrate My Monitor?
PK Safety services BW Technologies by Honeywell gas monitors in-house with factory-trained technicians. For help selecting the right part or to schedule calibration and repair, call 800.829.9580 or contact us online.
Part Numbers:
CG-Q58-4
Related Searches
Bw Technologies By Honeywell, Calibration Gas, Gas Detection
Frequently Asked Questions
What monitors is the BW CG-Q58-4 compatible with?
The CG-Q58-4 is compatible with the GasAlert Max XT II, GasAlertMicroClip XL, GasAlertMicroClip X3, GasAlert Quattro, GasAlertMicro 5, and GasAlertMicro 5 PID (the PID model also requires Isobutylene Calibration Gas). Always verify compatibility with your instrument's calibration manual before ordering.
Why choose the 58L CG-Q58-4 instead of the 34L CG-Q34-4?
The 58L cylinder provides roughly 70% more gas per cylinder compared to the 34L CG-Q34-4, making it cost-effective for facilities with multiple gas monitors or high bump-test frequency. For most operations with one to three monitors, the 34L is sufficient. Call 800.829.9580 and our gas detection specialists will help you calculate the right cylinder size.
Can the CG-Q58-4 be used for bump testing?
Yes. The CG-Q58-4 is suitable for both functional bump tests and full calibration procedures. Pair it with the BW Demand Flow Regulator REG-DF-1 for automated IntelliDoX calibrations, or the Fixed Flow Regulator REG-0.5 LPM for manual procedures on diffusion-type monitors.
Is the CG-Q58-4 available for expedited shipping?
No. Compressed calibration gas is classified as HazMat and must ship via UPS Ground only. Expedited or air freight is not available. Calibration gas is also non-returnable. Plan purchases 5–7 business days ahead of need to ensure continuity of your gas detection program.
What is the shelf life of the BW CG-Q58-4?
The BW CG-Q58-4 has a two-year shelf life from the fill date printed on the cylinder label. Do not use expired gas to bump test or calibrate a monitor — doing so may produce inaccurate sensor readings and invalidate compliance records. Store cylinders upright in a cool, dry location below 120°F away from heat sources and direct sunlight.
Can PK Safety help me select the right calibration gas for my fleet?
Yes. PK Safety is an authorized BW Technologies by Honeywell reseller and Factory Authorized Service Center. Our gas detection specialists can recommend the right calibration gas cylinder size and regulator combination for your specific monitors and usage frequency. Call 800.829.9580 or visit our BW Honeywell Gas Monitor Calibration Service page.
Specifications
Specifications
-
Type
-
Gas Type
-
Product Weight (lbs.)
-
Height (in.)
-
Length (in.)
-
Width (in.)
-
Country of Origin
Reviews
Reviews
Keep your team protected & compliant!
- Expert guidance tailored to your specific needs
- Access responsive customer support when you need it
- Enjoy fast shipping directly to your location
- Benefit from extensive industry knowledge—75+ years of experience
- In-house gas detection calibration & repair services available
