WatchGas SST Range Wireless Car Charger SST-CAR-CHG
Description
When your safety monitors live in a truck, the charging system has to live in the truck too.
The WatchGas SST Range Wireless Car Charger keeps your gas detectors powered and ready in the field. Drop the monitor into the auto-clamping cradle — no cables. Smart protection guards against overcharging and overheating in a hot truck cabin. Qi-certified induction charging delivers a full charge in 3–5 hours, shorter than a typical field-service workday. Multiple mounting options and dual power inputs fit different vehicle configurations.
Compatible monitors: WatchGas SST4-MICRO, SST4-MINI, SST4-PUMP, and SST5 only. This charger is NOT compatible with the WatchGas SST1 single-gas monitor series — those monitors use a different charging system.
Key features:
- Qi-certified wireless induction charging — industry-standard protocol with thermal management and foreign-object detection
- Auto-clamping cradle — secures the monitor through rough terrain and vehicle vibration
- Overcharge and overheat protection — designed for hot-vehicle cabin conditions
- Multiple mounting options + dual power inputs — fits different vehicle configurations and wiring layouts
- Full charge in 3–5 hours — monitors are topped up between job sites, not sidelined between shifts
PK Safety supports the WatchGas SST fleet with factory-trained technicians in-house. If you're planning a mobile charging deployment across multiple service vehicles, call us at
800.829.9580. We can quote multi-unit orders and answer wiring compatibility questions.
Technical documents:
SST Accessories Brochure
Specification Sheet
Quick Start Guide
Part Number: WG01-SST-CAR-CHG — WatchGas SST Range Wireless Car Charger (Qi-certified induction)
Frequently Asked Questions
Which WatchGas monitors is the SST-CAR-CHG compatible with?
The SST-CAR-CHG is compatible with the WatchGas SST4 series and SST5 monitors: SST4-MICRO Diffusion 4-Gas, SST4-MINI Diffusion 4-Gas, and SST4-PUMP 4-Gas Detector. It is NOT compatible with the WatchGas SST1 single-gas monitor series — those monitors use a different charging system. Do not attempt to charge an SST1 monitor in this cradle.
What is Qi-certified charging, and why does it matter for a field safety application?
Qi (pronounced "chee") is the industry-standard wireless-charging protocol maintained by the Wireless Power Consortium — the same protocol used in modern smartphones and hospital medical equipment. Qi certification means the charger has been independently tested for power transfer efficiency, thermal management (it won't overheat during normal operation), and foreign-object detection (it won't attempt to charge if a metal object is on the cradle). For a gas monitor that lives in a hot truck cabin all day, those safety guarantees matter.
How does the auto-clamping cradle work?
The auto-clamping cradle uses a spring-loaded mechanism that secures the monitor when it's seated and releases automatically when the monitor is lifted out. It holds the monitor through vehicle vibration and rough terrain without damaging the housing or the charging surface. Drop-in, seat, done — consistent charging behavior that field crews don't have to think about.
How long does a full charge take?
Approximately 3–5 hours from a fully depleted battery, per the WatchGas Specification Sheet. That's shorter than a typical field-service workday, so monitors can be topped up between site visits. For vehicles running multi-site routes, the charger keeps the monitor at working charge throughout the shift without requiring the monitor to be taken off the cradle between jobs.
How does PK Safety support multi-vehicle charging deployments?
PK Safety carries the full WatchGas SST line and services the platform with factory-trained technicians in-house. For fleets deploying the SST-CAR-CHG across multiple service trucks, we can quote multi-unit orders and walk through vehicle wiring compatibility. We also handle BW/Honeywell (Factory Authorized), RKI, and RAE Systems monitors under the same roof. Call
800.829.9580 — a person who knows the SST platform will pick up.
Planning a mobile fleet-charging deployment across multiple service vehicles? Call PK Safety at
800.829.9580.
Specifications
- Compatible monitors: WatchGas SST4-MICRO, SST4-MINI, SST4-PUMP, SST5
- NOT compatible with WatchGas SST1 monitors
- Charging protocol: Qi-certified induction
- Charge time: approximately 3–5 hours (full charge from depleted)
- Cradle: auto-clamping, spring-loaded
- Protection: overcharge and overheat safeguards
- Mounting: multiple options, dual power inputs
- Part Number: WG01-SST-CAR-CHG
Read more
Description
When your safety monitors live in a truck, the charging system has to live in the truck too.
The WatchGas SST Range Wireless Car Charger keeps your gas detectors powered and ready in the field. Drop the monitor into the auto-clamping cradle — no cables. Smart protection guards against overcharging and overheating in a hot truck cabin. Qi-certified induction charging delivers a full charge in 3–5 hours, shorter than a typical field-service workday. Multiple mounting options and dual power inputs fit different vehicle configurations.
Compatible monitors: WatchGas SST4-MICRO, SST4-MINI, SST4-PUMP, and SST5 only. This charger is NOT compatible with the WatchGas SST1 single-gas monitor series — those monitors use a different charging system.
Key features:
- Qi-certified wireless induction charging — industry-standard protocol with thermal management and foreign-object detection
- Auto-clamping cradle — secures the monitor through rough terrain and vehicle vibration
- Overcharge and overheat protection — designed for hot-vehicle cabin conditions
- Multiple mounting options + dual power inputs — fits different vehicle configurations and wiring layouts
- Full charge in 3–5 hours — monitors are topped up between job sites, not sidelined between shifts
PK Safety supports the WatchGas SST fleet with factory-trained technicians in-house. If you're planning a mobile charging deployment across multiple service vehicles, call us at 800.829.9580. We can quote multi-unit orders and answer wiring compatibility questions.
Technical documents:
SST Accessories Brochure
Specification Sheet
Quick Start Guide
Part Number: WG01-SST-CAR-CHG — WatchGas SST Range Wireless Car Charger (Qi-certified induction)
Frequently Asked Questions
Which WatchGas monitors is the SST-CAR-CHG compatible with?
The SST-CAR-CHG is compatible with the WatchGas SST4 series and SST5 monitors: SST4-MICRO Diffusion 4-Gas, SST4-MINI Diffusion 4-Gas, and SST4-PUMP 4-Gas Detector. It is NOT compatible with the WatchGas SST1 single-gas monitor series — those monitors use a different charging system. Do not attempt to charge an SST1 monitor in this cradle.
What is Qi-certified charging, and why does it matter for a field safety application?
Qi (pronounced "chee") is the industry-standard wireless-charging protocol maintained by the Wireless Power Consortium — the same protocol used in modern smartphones and hospital medical equipment. Qi certification means the charger has been independently tested for power transfer efficiency, thermal management (it won't overheat during normal operation), and foreign-object detection (it won't attempt to charge if a metal object is on the cradle). For a gas monitor that lives in a hot truck cabin all day, those safety guarantees matter.
How does the auto-clamping cradle work?
The auto-clamping cradle uses a spring-loaded mechanism that secures the monitor when it's seated and releases automatically when the monitor is lifted out. It holds the monitor through vehicle vibration and rough terrain without damaging the housing or the charging surface. Drop-in, seat, done — consistent charging behavior that field crews don't have to think about.
How long does a full charge take?
Approximately 3–5 hours from a fully depleted battery, per the WatchGas Specification Sheet. That's shorter than a typical field-service workday, so monitors can be topped up between site visits. For vehicles running multi-site routes, the charger keeps the monitor at working charge throughout the shift without requiring the monitor to be taken off the cradle between jobs.
How does PK Safety support multi-vehicle charging deployments?
PK Safety carries the full WatchGas SST line and services the platform with factory-trained technicians in-house. For fleets deploying the SST-CAR-CHG across multiple service trucks, we can quote multi-unit orders and walk through vehicle wiring compatibility. We also handle BW/Honeywell (Factory Authorized), RKI, and RAE Systems monitors under the same roof. Call 800.829.9580 — a person who knows the SST platform will pick up.
Planning a mobile fleet-charging deployment across multiple service vehicles? Call PK Safety at 800.829.9580.
Specifications
- Compatible monitors: WatchGas SST4-MICRO, SST4-MINI, SST4-PUMP, SST5
- NOT compatible with WatchGas SST1 monitors
- Charging protocol: Qi-certified induction
- Charge time: approximately 3–5 hours (full charge from depleted)
- Cradle: auto-clamping, spring-loaded
- Protection: overcharge and overheat safeguards
- Mounting: multiple options, dual power inputs
- Part Number: WG01-SST-CAR-CHG
When your safety monitors live in a truck, the charging system has to live in the truck too.
The WatchGas SST Range Wireless Car Charger keeps your gas detectors powered and ready in the field. Drop the monitor into the auto-clamping cradle — no cables. Smart protection guards against overcharging and overheating in a hot truck cabin. Qi-certified induction charging delivers a full charge in 3–5 hours, shorter than a typical field-service workday. Multiple mounting options and dual power inputs fit different vehicle configurations.
Compatible monitors: WatchGas SST4-MICRO, SST4-MINI, SST4-PUMP, and SST5 only. This charger is NOT compatible with the WatchGas SST1 single-gas monitor series — those monitors use a different charging system.
Key features:
- Qi-certified wireless induction charging — industry-standard protocol with thermal management and foreign-object detection
- Auto-clamping cradle — secures the monitor through rough terrain and vehicle vibration
- Overcharge and overheat protection — designed for hot-vehicle cabin conditions
- Multiple mounting options + dual power inputs — fits different vehicle configurations and wiring layouts
- Full charge in 3–5 hours — monitors are topped up between job sites, not sidelined between shifts
PK Safety supports the WatchGas SST fleet with factory-trained technicians in-house. If you're planning a mobile charging deployment across multiple service vehicles, call us at 800.829.9580. We can quote multi-unit orders and answer wiring compatibility questions.
Technical documents:
SST Accessories Brochure
Specification Sheet
Quick Start Guide
Part Number: WG01-SST-CAR-CHG — WatchGas SST Range Wireless Car Charger (Qi-certified induction)
Frequently Asked Questions
Which WatchGas monitors is the SST-CAR-CHG compatible with?
The SST-CAR-CHG is compatible with the WatchGas SST4 series and SST5 monitors: SST4-MICRO Diffusion 4-Gas, SST4-MINI Diffusion 4-Gas, and SST4-PUMP 4-Gas Detector. It is NOT compatible with the WatchGas SST1 single-gas monitor series — those monitors use a different charging system. Do not attempt to charge an SST1 monitor in this cradle.
What is Qi-certified charging, and why does it matter for a field safety application?
Qi (pronounced "chee") is the industry-standard wireless-charging protocol maintained by the Wireless Power Consortium — the same protocol used in modern smartphones and hospital medical equipment. Qi certification means the charger has been independently tested for power transfer efficiency, thermal management (it won't overheat during normal operation), and foreign-object detection (it won't attempt to charge if a metal object is on the cradle). For a gas monitor that lives in a hot truck cabin all day, those safety guarantees matter.
How does the auto-clamping cradle work?
The auto-clamping cradle uses a spring-loaded mechanism that secures the monitor when it's seated and releases automatically when the monitor is lifted out. It holds the monitor through vehicle vibration and rough terrain without damaging the housing or the charging surface. Drop-in, seat, done — consistent charging behavior that field crews don't have to think about.
How long does a full charge take?
Approximately 3–5 hours from a fully depleted battery, per the WatchGas Specification Sheet. That's shorter than a typical field-service workday, so monitors can be topped up between site visits. For vehicles running multi-site routes, the charger keeps the monitor at working charge throughout the shift without requiring the monitor to be taken off the cradle between jobs.
How does PK Safety support multi-vehicle charging deployments?
PK Safety carries the full WatchGas SST line and services the platform with factory-trained technicians in-house. For fleets deploying the SST-CAR-CHG across multiple service trucks, we can quote multi-unit orders and walk through vehicle wiring compatibility. We also handle BW/Honeywell (Factory Authorized), RKI, and RAE Systems monitors under the same roof. Call 800.829.9580 — a person who knows the SST platform will pick up.
Planning a mobile fleet-charging deployment across multiple service vehicles? Call PK Safety at 800.829.9580.
Specifications
- Compatible monitors: WatchGas SST4-MICRO, SST4-MINI, SST4-PUMP, SST5
- NOT compatible with WatchGas SST1 monitors
- Charging protocol: Qi-certified induction
- Charge time: approximately 3–5 hours (full charge from depleted)
- Cradle: auto-clamping, spring-loaded
- Protection: overcharge and overheat safeguards
- Mounting: multiple options, dual power inputs
- Part Number: WG01-SST-CAR-CHG
Specifications
Specifications
-
MPN
-
Product Weight (lbs.)
-
Country of Origin
Reviews
Reviews
Keep your team protected & compliant!
- Expert guidance tailored to your specific needs
- Access responsive customer support when you need it
- Enjoy fast shipping directly to your location
- Benefit from extensive industry knowledge—75+ years of experience
- In-house gas detection calibration & repair services available
