RKI Instruments Manual Calibration Kit for GX-2009 Monitor
Description
Note: This item ships via UPS Ground due to HazMat restrictions and is not available for expedited shipping. Calibration gas is not returnable. Please check your selection carefully before ordering. Questions? Call 800.829.9580.
This complete calibration kit for the RKI GX-2009 (and legacy GX-2001) gas monitors includes everything needed to calibrate and bump test quickly and easily. The kit bundles a full cylinder of RKI calibration gas, a constant flow regulator with gauge and knob, a calibration adapter that fits over the monitor sensors, tubing, and a carrying case to keep everything protected and organized.
The GX-2009 has been discontinued. Consider the GX-3R instead for dependable multi-gas detection.
Kit Includes:
- One aluminum 34L cylinder of calibration gas (Methane / H2S / CO / O2)
- Constant flow regulator with gauge and knob
- Calibration adapter
- Tygon tubing
- Carrying case
PK Safety services RKI Instruments gas monitors in-house with factory-trained technicians — calibration, sensor replacement, bump testing, and full repair. Call 800.829.9580 to speak with a technician.
Part Number:
81-GX01HSCO-LV
Related Searches
Calibration Gas, Gas Detection
Frequently Asked Questions
The GX-2009 is discontinued — should I buy this kit or upgrade the monitor?
If the GX-2009 fleet is still in service and being maintained, this calibration kit keeps it compliant. When the time comes to replace aging units, the GX-3R is the modern equivalent with updated sensors, a hot-swappable battery, and optional wireless communication in the GX-3R Pro. Call 800.829.9580 to discuss a fleet transition or service plan for existing GX-2009 units.
What calibration gas mixture is in this kit?
The 34-liter aluminum cylinder contains a blend of methane (CH4), hydrogen sulfide (H2S), carbon monoxide (CO), and oxygen (O2) in nitrogen — matched to the standard four-gas sensor configuration of the GX-2009. Calibration gas is not returnable; verify the monitor's sensor loadout matches this blend before ordering.
Is this a constant flow or demand flow regulator?
This kit includes a constant flow regulator with gauge and knob, which delivers a steady flow of calibration gas regardless of system back pressure. This is appropriate for the GX-2009's calibration procedure. A demand flow regulator (used with some automated calibration stations) is a different product.
Does this kit work with the GX-2001?
Yes. The 81-GX01HSCO-LV kit is compatible with both the GX-2009 and the legacy GX-2001 multi-gas monitors. Both models have been discontinued by RKI. If replacement parts or additional calibration supplies are needed for either model, call 800.829.9580.
How often should the GX-2009 be calibrated?
RKI recommends bump testing before each day of use and full calibration at intervals defined by the site's safety program — typically every 30–90 days for active field use and at minimum every six months. Under OSHA 29 CFR 1910.146 confined space requirements, the monitor must be in known-good calibration before permit-space entry.
Can PK Safety service or repair the GX-2009?
PK Safety services RKI Instruments monitors in-house with factory-trained technicians, including legacy models like the GX-2009. If parts are still available from RKI, PK Safety can perform sensor replacement, calibration, and functional testing. Call 800.829.9580 before sending in a unit to confirm parts availability for the GX-2009.
Read more
Description
Note: This item ships via UPS Ground due to HazMat restrictions and is not available for expedited shipping. Calibration gas is not returnable. Please check your selection carefully before ordering. Questions? Call 800.829.9580.
This complete calibration kit for the RKI GX-2009 (and legacy GX-2001) gas monitors includes everything needed to calibrate and bump test quickly and easily. The kit bundles a full cylinder of RKI calibration gas, a constant flow regulator with gauge and knob, a calibration adapter that fits over the monitor sensors, tubing, and a carrying case to keep everything protected and organized.
The GX-2009 has been discontinued. Consider the GX-3R instead for dependable multi-gas detection.
Kit Includes:
- One aluminum 34L cylinder of calibration gas (Methane / H2S / CO / O2)
- Constant flow regulator with gauge and knob
- Calibration adapter
- Tygon tubing
- Carrying case
PK Safety services RKI Instruments gas monitors in-house with factory-trained technicians — calibration, sensor replacement, bump testing, and full repair. Call 800.829.9580 to speak with a technician.
Part Number:
81-GX01HSCO-LV
Related Searches
Calibration Gas, Gas Detection
Frequently Asked Questions
The GX-2009 is discontinued — should I buy this kit or upgrade the monitor?
If the GX-2009 fleet is still in service and being maintained, this calibration kit keeps it compliant. When the time comes to replace aging units, the GX-3R is the modern equivalent with updated sensors, a hot-swappable battery, and optional wireless communication in the GX-3R Pro. Call 800.829.9580 to discuss a fleet transition or service plan for existing GX-2009 units.
What calibration gas mixture is in this kit?
The 34-liter aluminum cylinder contains a blend of methane (CH4), hydrogen sulfide (H2S), carbon monoxide (CO), and oxygen (O2) in nitrogen — matched to the standard four-gas sensor configuration of the GX-2009. Calibration gas is not returnable; verify the monitor's sensor loadout matches this blend before ordering.
Is this a constant flow or demand flow regulator?
This kit includes a constant flow regulator with gauge and knob, which delivers a steady flow of calibration gas regardless of system back pressure. This is appropriate for the GX-2009's calibration procedure. A demand flow regulator (used with some automated calibration stations) is a different product.
Does this kit work with the GX-2001?
Yes. The 81-GX01HSCO-LV kit is compatible with both the GX-2009 and the legacy GX-2001 multi-gas monitors. Both models have been discontinued by RKI. If replacement parts or additional calibration supplies are needed for either model, call 800.829.9580.
How often should the GX-2009 be calibrated?
RKI recommends bump testing before each day of use and full calibration at intervals defined by the site's safety program — typically every 30–90 days for active field use and at minimum every six months. Under OSHA 29 CFR 1910.146 confined space requirements, the monitor must be in known-good calibration before permit-space entry.
Can PK Safety service or repair the GX-2009?
PK Safety services RKI Instruments monitors in-house with factory-trained technicians, including legacy models like the GX-2009. If parts are still available from RKI, PK Safety can perform sensor replacement, calibration, and functional testing. Call 800.829.9580 before sending in a unit to confirm parts availability for the GX-2009.
Note: This item ships via UPS Ground due to HazMat restrictions and is not available for expedited shipping. Calibration gas is not returnable. Please check your selection carefully before ordering. Questions? Call 800.829.9580.
This complete calibration kit for the RKI GX-2009 (and legacy GX-2001) gas monitors includes everything needed to calibrate and bump test quickly and easily. The kit bundles a full cylinder of RKI calibration gas, a constant flow regulator with gauge and knob, a calibration adapter that fits over the monitor sensors, tubing, and a carrying case to keep everything protected and organized.
The GX-2009 has been discontinued. Consider the GX-3R instead for dependable multi-gas detection.
Kit Includes:
- One aluminum 34L cylinder of calibration gas (Methane / H2S / CO / O2)
- Constant flow regulator with gauge and knob
- Calibration adapter
- Tygon tubing
- Carrying case
PK Safety services RKI Instruments gas monitors in-house with factory-trained technicians — calibration, sensor replacement, bump testing, and full repair. Call 800.829.9580 to speak with a technician.
Part Number:
81-GX01HSCO-LV
Related Searches
Calibration Gas, Gas Detection
Frequently Asked Questions
The GX-2009 is discontinued — should I buy this kit or upgrade the monitor?
If the GX-2009 fleet is still in service and being maintained, this calibration kit keeps it compliant. When the time comes to replace aging units, the GX-3R is the modern equivalent with updated sensors, a hot-swappable battery, and optional wireless communication in the GX-3R Pro. Call 800.829.9580 to discuss a fleet transition or service plan for existing GX-2009 units.
What calibration gas mixture is in this kit?
The 34-liter aluminum cylinder contains a blend of methane (CH4), hydrogen sulfide (H2S), carbon monoxide (CO), and oxygen (O2) in nitrogen — matched to the standard four-gas sensor configuration of the GX-2009. Calibration gas is not returnable; verify the monitor's sensor loadout matches this blend before ordering.
Is this a constant flow or demand flow regulator?
This kit includes a constant flow regulator with gauge and knob, which delivers a steady flow of calibration gas regardless of system back pressure. This is appropriate for the GX-2009's calibration procedure. A demand flow regulator (used with some automated calibration stations) is a different product.
Does this kit work with the GX-2001?
Yes. The 81-GX01HSCO-LV kit is compatible with both the GX-2009 and the legacy GX-2001 multi-gas monitors. Both models have been discontinued by RKI. If replacement parts or additional calibration supplies are needed for either model, call 800.829.9580.
How often should the GX-2009 be calibrated?
RKI recommends bump testing before each day of use and full calibration at intervals defined by the site's safety program — typically every 30–90 days for active field use and at minimum every six months. Under OSHA 29 CFR 1910.146 confined space requirements, the monitor must be in known-good calibration before permit-space entry.
Can PK Safety service or repair the GX-2009?
PK Safety services RKI Instruments monitors in-house with factory-trained technicians, including legacy models like the GX-2009. If parts are still available from RKI, PK Safety can perform sensor replacement, calibration, and functional testing. Call 800.829.9580 before sending in a unit to confirm parts availability for the GX-2009.
Specifications
Specifications
-
Type
-
Gas Type
-
Product Weight (lbs.)
-
Height (in.)
-
Length (in.)
-
Width (in.)
-
Country of Origin
Reviews (2)
Reviews (2)
Keep your team protected & compliant!
- Expert guidance tailored to your specific needs
- Access responsive customer support when you need it
- Enjoy fast shipping directly to your location
- Benefit from extensive industry knowledge—75+ years of experience
- In-house gas detection calibration & repair services available
