RKI GX-6000 34AL Cyl 100ppm Isobutylene/H2S/CO/CH4/O2 Cal Kit 81-6A...
Description
This complete calibration kit is designed for the RKI GX-6000 multi-gas monitor. The kit contains everything needed to perform a full calibration in the field or shop, with no additional accessories required.
Note: Calibration gas is not returnable. Verify the GX-6000 sensor configuration matches this gas mixture before ordering. Questions? Call
800.829.9580 and a technician will confirm compatibility.
Kit Includes:
- 34AL aluminum cylinder of 100 ppm Isobutylene / 25 ppm H2S / 50 ppm CO / 50% LEL CH4 / 12% O2 calibration gas mixture
- Demand flow regulator
- Carrying case
- Tubing
Part Number:
81-6ABX-DLV
PK Safety
services RKI Instruments gas monitors in-house with factory-trained technicians — calibration, sensor replacement, bump testing, and full repair. Call
800.829.9580 to speak with a technician.
Related Searches
Calibration Gas,
Gas Detection
Frequently Asked Questions
Is this calibration kit compatible with the GX-6100 or other RKI monitors?
This kit (81-6ABX-DLV) is configured specifically for the GX-6000 with the isobutylene PID sensor option. For the
GX-6100, the correct calibration gas depends on the sensor loadout — different part numbers may apply. Call
800.829.9580 to verify the right kit for any specific monitor configuration.
What gas concentrations are in the 81-6ABX-DLV mixture?
The 34AL cylinder contains: 100 ppm isobutylene (for PID calibration), 25 ppm hydrogen sulfide, 50 ppm carbon monoxide, 50% LEL methane, and 12% oxygen — balance nitrogen. This combination is chosen to match the typical sensor configuration of the GX-6000 multi-gas monitor.
Why is calibration gas not returnable?
Calibration gas is a hazardous material with a traceable certification date on the cylinder. Once shipped, it cannot be restocked or tested for integrity, so all sales are final. Confirm the monitor model and gas mix before ordering. Call
800.829.9580 for a pre-purchase verification — that call is free.
Does this ship via standard ground or does HazMat apply?
Calibration gas cylinders are regulated as hazardous materials and ship via UPS Ground only. Expedited shipping options are not available for this kit. Factor 3–6 business days transit time into planning.
How often should the GX-6000 be calibrated?
RKI recommends bump testing before each day of use and full calibration per the site's SOP — typically every 30–90 days for active field use, or at minimum every six months. Regulatory programs under OSHA 29 CFR 1910.146 may impose more frequent calibration schedules depending on the hazard assessment.
Can PK Safety calibrate or service the GX-6000?
Yes. PK Safety services RKI Instruments monitors in-house, including the GX-6000 series, with factory-trained technicians. Send the unit in for calibration, sensor replacement, or full inspection. Call
800.829.9580 to start a service order or get a return authorization.
Read more
Description
This complete calibration kit is designed for the RKI GX-6000 multi-gas monitor. The kit contains everything needed to perform a full calibration in the field or shop, with no additional accessories required.
Note: Calibration gas is not returnable. Verify the GX-6000 sensor configuration matches this gas mixture before ordering. Questions? Call 800.829.9580 and a technician will confirm compatibility.
Kit Includes:
- 34AL aluminum cylinder of 100 ppm Isobutylene / 25 ppm H2S / 50 ppm CO / 50% LEL CH4 / 12% O2 calibration gas mixture
- Demand flow regulator
- Carrying case
- Tubing
Part Number:
81-6ABX-DLV
PK Safety services RKI Instruments gas monitors in-house with factory-trained technicians — calibration, sensor replacement, bump testing, and full repair. Call 800.829.9580 to speak with a technician.
Related Searches
Calibration Gas,
Gas Detection
Frequently Asked Questions
Is this calibration kit compatible with the GX-6100 or other RKI monitors?
This kit (81-6ABX-DLV) is configured specifically for the GX-6000 with the isobutylene PID sensor option. For the GX-6100, the correct calibration gas depends on the sensor loadout — different part numbers may apply. Call 800.829.9580 to verify the right kit for any specific monitor configuration.
What gas concentrations are in the 81-6ABX-DLV mixture?
The 34AL cylinder contains: 100 ppm isobutylene (for PID calibration), 25 ppm hydrogen sulfide, 50 ppm carbon monoxide, 50% LEL methane, and 12% oxygen — balance nitrogen. This combination is chosen to match the typical sensor configuration of the GX-6000 multi-gas monitor.
Why is calibration gas not returnable?
Calibration gas is a hazardous material with a traceable certification date on the cylinder. Once shipped, it cannot be restocked or tested for integrity, so all sales are final. Confirm the monitor model and gas mix before ordering. Call 800.829.9580 for a pre-purchase verification — that call is free.
Does this ship via standard ground or does HazMat apply?
Calibration gas cylinders are regulated as hazardous materials and ship via UPS Ground only. Expedited shipping options are not available for this kit. Factor 3–6 business days transit time into planning.
How often should the GX-6000 be calibrated?
RKI recommends bump testing before each day of use and full calibration per the site's SOP — typically every 30–90 days for active field use, or at minimum every six months. Regulatory programs under OSHA 29 CFR 1910.146 may impose more frequent calibration schedules depending on the hazard assessment.
Can PK Safety calibrate or service the GX-6000?
Yes. PK Safety services RKI Instruments monitors in-house, including the GX-6000 series, with factory-trained technicians. Send the unit in for calibration, sensor replacement, or full inspection. Call 800.829.9580 to start a service order or get a return authorization.
This complete calibration kit is designed for the RKI GX-6000 multi-gas monitor. The kit contains everything needed to perform a full calibration in the field or shop, with no additional accessories required.
Note: Calibration gas is not returnable. Verify the GX-6000 sensor configuration matches this gas mixture before ordering. Questions? Call 800.829.9580 and a technician will confirm compatibility.
Kit Includes:
- 34AL aluminum cylinder of 100 ppm Isobutylene / 25 ppm H2S / 50 ppm CO / 50% LEL CH4 / 12% O2 calibration gas mixture
- Demand flow regulator
- Carrying case
- Tubing
Part Number:
81-6ABX-DLV
PK Safety services RKI Instruments gas monitors in-house with factory-trained technicians — calibration, sensor replacement, bump testing, and full repair. Call 800.829.9580 to speak with a technician.
Related Searches
Calibration Gas,
Gas Detection
Frequently Asked Questions
Is this calibration kit compatible with the GX-6100 or other RKI monitors?
This kit (81-6ABX-DLV) is configured specifically for the GX-6000 with the isobutylene PID sensor option. For the GX-6100, the correct calibration gas depends on the sensor loadout — different part numbers may apply. Call 800.829.9580 to verify the right kit for any specific monitor configuration.
What gas concentrations are in the 81-6ABX-DLV mixture?
The 34AL cylinder contains: 100 ppm isobutylene (for PID calibration), 25 ppm hydrogen sulfide, 50 ppm carbon monoxide, 50% LEL methane, and 12% oxygen — balance nitrogen. This combination is chosen to match the typical sensor configuration of the GX-6000 multi-gas monitor.
Why is calibration gas not returnable?
Calibration gas is a hazardous material with a traceable certification date on the cylinder. Once shipped, it cannot be restocked or tested for integrity, so all sales are final. Confirm the monitor model and gas mix before ordering. Call 800.829.9580 for a pre-purchase verification — that call is free.
Does this ship via standard ground or does HazMat apply?
Calibration gas cylinders are regulated as hazardous materials and ship via UPS Ground only. Expedited shipping options are not available for this kit. Factor 3–6 business days transit time into planning.
How often should the GX-6000 be calibrated?
RKI recommends bump testing before each day of use and full calibration per the site's SOP — typically every 30–90 days for active field use, or at minimum every six months. Regulatory programs under OSHA 29 CFR 1910.146 may impose more frequent calibration schedules depending on the hazard assessment.
Can PK Safety calibrate or service the GX-6000?
Yes. PK Safety services RKI Instruments monitors in-house, including the GX-6000 series, with factory-trained technicians. Send the unit in for calibration, sensor replacement, or full inspection. Call 800.829.9580 to start a service order or get a return authorization.
Specifications
Specifications
-
Type
-
Gas Type
-
Product Weight (lbs.)
-
Height (in.)
-
Length (in.)
-
Width (in.)
-
Country of Origin
Reviews
Reviews
Keep your team protected & compliant!
- Expert guidance tailored to your specific needs
- Access responsive customer support when you need it
- Enjoy fast shipping directly to your location
- Benefit from extensive industry knowledge—75+ years of experience
- In-house gas detection calibration & repair services available
