RAE Systems Water Trap External Filter 10/Pack 008-3022-010
RAE Systems Water Trap External Filter 10/Pack 008-3022-010
Description
The RAE Systems Water Trap External Filters are made of PTFE Teflon membrane with a 0.2 micron pore size to prevent water from being sucked into the sensor manifold, which would cause extensive damage to the monitor. They also prevent dust and other particles from entering the monitor, thereby prolonging the operating life of the sensors. To install the water trap filter, twist it tightly into the Luer connector on the inlet probe. If the water trap filter changes color, traps dust or other particulates inside it, or if water has been sucked in, the filter needs to be replaced. The water trap filters should not be used for gases that could be absorbed by the filter material. These gases include: CL2, PH3, NH3, and HCN. Package of 10 filters.
Part Number:
008-3022-010
Related Searches
Filters,
Gas Detection,
Gas Monitor Parts
Read more
Description
The RAE Systems Water Trap External Filters are made of PTFE Teflon membrane with a 0.2 micron pore size to prevent water from being sucked into the sensor manifold, which would cause extensive damage to the monitor. They also prevent dust and other particles from entering the monitor, thereby prolonging the operating life of the sensors. To install the water trap filter, twist it tightly into the Luer connector on the inlet probe. If the water trap filter changes color, traps dust or other particulates inside it, or if water has been sucked in, the filter needs to be replaced. The water trap filters should not be used for gases that could be absorbed by the filter material. These gases include: CL2, PH3, NH3, and HCN. Package of 10 filters.
Part Number:
008-3022-010
Related Searches
Filters,
Gas Detection,
Gas Monitor Parts
The RAE Systems Water Trap External Filters are made of PTFE Teflon membrane with a 0.2 micron pore size to prevent water from being sucked into the sensor manifold, which would cause extensive damage to the monitor. They also prevent dust and other particles from entering the monitor, thereby prolonging the operating life of the sensors. To install the water trap filter, twist it tightly into the Luer connector on the inlet probe. If the water trap filter changes color, traps dust or other particulates inside it, or if water has been sucked in, the filter needs to be replaced. The water trap filters should not be used for gases that could be absorbed by the filter material. These gases include: CL2, PH3, NH3, and HCN. Package of 10 filters.
Part Number:
008-3022-010
Related Searches
Filters,
Gas Detection,
Gas Monitor Parts
Specifications
Specifications
-
Product Weight (lbs.)
-
Height (in.)
-
Length (in.)
-
Width (in.)
-
Country of Origin
Reviews (2)
Reviews (2)
Keep your team protected & compliant!
- Expert guidance tailored to your specific needs
- Access responsive customer support when you need it
- Enjoy fast shipping directly to your location
- Benefit from extensive industry knowledge—75+ years of experience
- In-house gas detection calibration & repair services available
