RAE Systems Replacement Oxygen Sensor 008-1161-000
Description
This replacement oxygen (O2) sensor is the electrochemical cell for a range of legacy RAE Systems monitors, including the AreaRAE, AreaRAE Gamma, AreaRAE IAQ, DRAE, MultiRAE Plus, QRAE, QRAE Plus, SentryRAE, and VRAE. 008-1161-000 is the common O2 cell these platforms share. Oxygen readings drive the deficient and enriched alarms that gate confined space entry.
Fit and Specifications
- Replacement oxygen (O2) sensor, part number 008-1161-000
- Electrochemical cell
- Fits AreaRAE, AreaRAE Gamma, AreaRAE IAQ, DRAE, MultiRAE Plus, QRAE, QRAE Plus, SentryRAE, and VRAE
- 2-year warranty
- Replaces only the O2 cell; other channels are unaffected
Compatibility and Ordering
Match the part number (008-1161-000) to the sensor you are replacing, and confirm your monitor model before you order. Buyers of this O2 sensor already own a legacy RAE Systems multi-gas monitor, so the fastest check is the model label on the back of the unit. If the label is worn or the unit is an older or modified configuration, call us with the serial number and we will verify fit against the monitor before anything ships. Newer platforms like the QRAE 3 and MultiRAE Pro use a different O2 cell.
Bump test the monitor after any repair or consumable change, and calibrate per the manufacturer's instructions and your site procedure.
PK Safety is a Factory Authorized RAE Systems Service Center with in-house technicians. Questions on fit or quantity? Call 800.829.9580.
Part Number:
008-1161-000 (2 year warranty)
Frequently Asked Questions
Which monitors use 008-1161-000?
AreaRAE, AreaRAE Gamma, AreaRAE IAQ, DRAE, MultiRAE Plus, QRAE, QRAE Plus, SentryRAE, and VRAE. If your unit is not listed, call us with the model and serial number to confirm.
Why does the O2 sensor need replacing?
Electrochemical O2 cells consume electrolyte as they read, so output drifts and the cell eventually fails calibration. Fleets typically plan replacement around the 2-year warranty window.
Will this fit my QRAE 3 or MultiRAE Pro?
No. The QRAE 3 and MultiRAE Pro use different smart sensors. Call us with the monitor model for the correct part.
Do I need to recalibrate after installing it?
Yes. Install the sensor, let the monitor stabilize, then run a fresh air zero and span calibration per the manufacturer's instructions and your site procedure before returning the unit to service.
Related Searches
Calibration Gas, RAE Systems, Gas Detection, Gas Detector Accessories
Read more
Description
This replacement oxygen (O2) sensor is the electrochemical cell for a range of legacy RAE Systems monitors, including the AreaRAE, AreaRAE Gamma, AreaRAE IAQ, DRAE, MultiRAE Plus, QRAE, QRAE Plus, SentryRAE, and VRAE. 008-1161-000 is the common O2 cell these platforms share. Oxygen readings drive the deficient and enriched alarms that gate confined space entry.
Fit and Specifications
- Replacement oxygen (O2) sensor, part number 008-1161-000
- Electrochemical cell
- Fits AreaRAE, AreaRAE Gamma, AreaRAE IAQ, DRAE, MultiRAE Plus, QRAE, QRAE Plus, SentryRAE, and VRAE
- 2-year warranty
- Replaces only the O2 cell; other channels are unaffected
Compatibility and Ordering
Match the part number (008-1161-000) to the sensor you are replacing, and confirm your monitor model before you order. Buyers of this O2 sensor already own a legacy RAE Systems multi-gas monitor, so the fastest check is the model label on the back of the unit. If the label is worn or the unit is an older or modified configuration, call us with the serial number and we will verify fit against the monitor before anything ships. Newer platforms like the QRAE 3 and MultiRAE Pro use a different O2 cell.
Bump test the monitor after any repair or consumable change, and calibrate per the manufacturer's instructions and your site procedure.
PK Safety is a Factory Authorized RAE Systems Service Center with in-house technicians. Questions on fit or quantity? Call 800.829.9580.
Part Number:
008-1161-000 (2 year warranty)
Frequently Asked Questions
Which monitors use 008-1161-000?
AreaRAE, AreaRAE Gamma, AreaRAE IAQ, DRAE, MultiRAE Plus, QRAE, QRAE Plus, SentryRAE, and VRAE. If your unit is not listed, call us with the model and serial number to confirm.
Why does the O2 sensor need replacing?
Electrochemical O2 cells consume electrolyte as they read, so output drifts and the cell eventually fails calibration. Fleets typically plan replacement around the 2-year warranty window.
Will this fit my QRAE 3 or MultiRAE Pro?
No. The QRAE 3 and MultiRAE Pro use different smart sensors. Call us with the monitor model for the correct part.
Do I need to recalibrate after installing it?
Yes. Install the sensor, let the monitor stabilize, then run a fresh air zero and span calibration per the manufacturer's instructions and your site procedure before returning the unit to service.
Related Searches
Calibration Gas, RAE Systems, Gas Detection, Gas Detector Accessories
This replacement oxygen (O2) sensor is the electrochemical cell for a range of legacy RAE Systems monitors, including the AreaRAE, AreaRAE Gamma, AreaRAE IAQ, DRAE, MultiRAE Plus, QRAE, QRAE Plus, SentryRAE, and VRAE. 008-1161-000 is the common O2 cell these platforms share. Oxygen readings drive the deficient and enriched alarms that gate confined space entry.
Fit and Specifications
- Replacement oxygen (O2) sensor, part number 008-1161-000
- Electrochemical cell
- Fits AreaRAE, AreaRAE Gamma, AreaRAE IAQ, DRAE, MultiRAE Plus, QRAE, QRAE Plus, SentryRAE, and VRAE
- 2-year warranty
- Replaces only the O2 cell; other channels are unaffected
Compatibility and Ordering
Match the part number (008-1161-000) to the sensor you are replacing, and confirm your monitor model before you order. Buyers of this O2 sensor already own a legacy RAE Systems multi-gas monitor, so the fastest check is the model label on the back of the unit. If the label is worn or the unit is an older or modified configuration, call us with the serial number and we will verify fit against the monitor before anything ships. Newer platforms like the QRAE 3 and MultiRAE Pro use a different O2 cell.
Bump test the monitor after any repair or consumable change, and calibrate per the manufacturer's instructions and your site procedure.
PK Safety is a Factory Authorized RAE Systems Service Center with in-house technicians. Questions on fit or quantity? Call 800.829.9580.
Part Number:
008-1161-000 (2 year warranty)
Frequently Asked Questions
Which monitors use 008-1161-000?
AreaRAE, AreaRAE Gamma, AreaRAE IAQ, DRAE, MultiRAE Plus, QRAE, QRAE Plus, SentryRAE, and VRAE. If your unit is not listed, call us with the model and serial number to confirm.
Why does the O2 sensor need replacing?
Electrochemical O2 cells consume electrolyte as they read, so output drifts and the cell eventually fails calibration. Fleets typically plan replacement around the 2-year warranty window.
Will this fit my QRAE 3 or MultiRAE Pro?
No. The QRAE 3 and MultiRAE Pro use different smart sensors. Call us with the monitor model for the correct part.
Do I need to recalibrate after installing it?
Yes. Install the sensor, let the monitor stabilize, then run a fresh air zero and span calibration per the manufacturer's instructions and your site procedure before returning the unit to service.
Related Searches
Calibration Gas, RAE Systems, Gas Detection, Gas Detector Accessories
Specifications
Specifications
-
Product Weight (lbs.)
-
Height (in.)
-
Length (in.)
-
Width (in.)
-
Country of Origin
-
Warranty Info
Reviews (4)
Reviews (4)
Keep your team protected & compliant!
- Expert guidance tailored to your specific needs
- Access responsive customer support when you need it
- Enjoy fast shipping directly to your location
- Benefit from extensive industry knowledge—75+ years of experience
- In-house gas detection calibration & repair services available
