RAE Systems QRAE III Calibration Gas 34L 600-0050-007
Description
This calibration gas is the 4-gas mix for the RAE Systems QRAE 3 multi-gas monitor. 600-0050-007 ships in a 34-liter aluminum cylinder, 50 percent methane (as LEL calibration), 18 percent oxygen, 10 ppm hydrogen sulfide, and 50 ppm carbon monoxide, with the balance nitrogen. One cylinder covers all four standard QRAE 3 channels during bump test and calibration.
Fit and Specifications
- QRAE 3 calibration gas, part number 600-0050-007
- 34-liter aluminum cylinder
- Mix: 50% CH4, 18% O2, 10 ppm H2S, 50 ppm CO, balance N2
- Pair with the 0.5 LPM regulator (002-3011-000) for 34L cylinders
- Shelf life printed on the cylinder label
Compatibility and Ordering
Match the part number (600-0050-007) to the part you are replacing, and confirm your monitor model before you order. Buyers of this QRAE 3 calibration gas cylinder already own QRAE 3, so the fastest check is the model label on the back of the unit. If the label is worn or the unit is an older or modified configuration, call us with the serial number and we will verify fit against the QRAE 3 before anything ships.
Bump test the monitor after any repair or consumable change, and calibrate per the manufacturer's instructions and your site procedure.
PK Safety is a Factory Authorized RAE Systems Service Center with in-house technicians, so this QRAE 3 calibration gas cylinder ships from the shop that services your monitor. Questions on fit or quantity? Call 800.829.9580.
Part Number:
600-0050-007
Frequently Asked Questions
What is in the 600-0050-007 cylinder?
50 percent methane for LEL span, 18 percent oxygen for the O2 channel, 10 ppm H2S, and 50 ppm CO, with nitrogen balance. One mix covers all four standard QRAE 3 channels in a single bump test or calibration.
Which regulator do I use with it?
Use the 0.5 LPM regulator, part number 002-3011-000. The 1 LPM regulator is sized for 58L and 103L cylinders and is for pumped-monitor sampling draw, not for the 34L bottle.
Is 600-0050-007 compatible with my QRAE 3?
Yes, this is the RAE Systems calibration gas mix for the QRAE 3. For other RAE monitors, call us and we will match the correct cylinder to your sensor loadout.
Do I need to recalibrate after swapping cylinders?
Changing the cylinder does not require recalibration on its own. Use the fresh cylinder during the next scheduled calibration per the manufacturer's instructions and your site procedure.
Related Searches
Calibration Gas, RAE Systems, Gas Detection, Gas Detector Accessories
Read more
Description
This calibration gas is the 4-gas mix for the RAE Systems QRAE 3 multi-gas monitor. 600-0050-007 ships in a 34-liter aluminum cylinder, 50 percent methane (as LEL calibration), 18 percent oxygen, 10 ppm hydrogen sulfide, and 50 ppm carbon monoxide, with the balance nitrogen. One cylinder covers all four standard QRAE 3 channels during bump test and calibration.
Fit and Specifications
- QRAE 3 calibration gas, part number 600-0050-007
- 34-liter aluminum cylinder
- Mix: 50% CH4, 18% O2, 10 ppm H2S, 50 ppm CO, balance N2
- Pair with the 0.5 LPM regulator (002-3011-000) for 34L cylinders
- Shelf life printed on the cylinder label
Compatibility and Ordering
Match the part number (600-0050-007) to the part you are replacing, and confirm your monitor model before you order. Buyers of this QRAE 3 calibration gas cylinder already own QRAE 3, so the fastest check is the model label on the back of the unit. If the label is worn or the unit is an older or modified configuration, call us with the serial number and we will verify fit against the QRAE 3 before anything ships.
Bump test the monitor after any repair or consumable change, and calibrate per the manufacturer's instructions and your site procedure.
PK Safety is a Factory Authorized RAE Systems Service Center with in-house technicians, so this QRAE 3 calibration gas cylinder ships from the shop that services your monitor. Questions on fit or quantity? Call 800.829.9580.
Part Number:
600-0050-007
Frequently Asked Questions
What is in the 600-0050-007 cylinder?
50 percent methane for LEL span, 18 percent oxygen for the O2 channel, 10 ppm H2S, and 50 ppm CO, with nitrogen balance. One mix covers all four standard QRAE 3 channels in a single bump test or calibration.
Which regulator do I use with it?
Use the 0.5 LPM regulator, part number 002-3011-000. The 1 LPM regulator is sized for 58L and 103L cylinders and is for pumped-monitor sampling draw, not for the 34L bottle.
Is 600-0050-007 compatible with my QRAE 3?
Yes, this is the RAE Systems calibration gas mix for the QRAE 3. For other RAE monitors, call us and we will match the correct cylinder to your sensor loadout.
Do I need to recalibrate after swapping cylinders?
Changing the cylinder does not require recalibration on its own. Use the fresh cylinder during the next scheduled calibration per the manufacturer's instructions and your site procedure.
Related Searches
Calibration Gas, RAE Systems, Gas Detection, Gas Detector Accessories
This calibration gas is the 4-gas mix for the RAE Systems QRAE 3 multi-gas monitor. 600-0050-007 ships in a 34-liter aluminum cylinder, 50 percent methane (as LEL calibration), 18 percent oxygen, 10 ppm hydrogen sulfide, and 50 ppm carbon monoxide, with the balance nitrogen. One cylinder covers all four standard QRAE 3 channels during bump test and calibration.
Fit and Specifications
- QRAE 3 calibration gas, part number 600-0050-007
- 34-liter aluminum cylinder
- Mix: 50% CH4, 18% O2, 10 ppm H2S, 50 ppm CO, balance N2
- Pair with the 0.5 LPM regulator (002-3011-000) for 34L cylinders
- Shelf life printed on the cylinder label
Compatibility and Ordering
Match the part number (600-0050-007) to the part you are replacing, and confirm your monitor model before you order. Buyers of this QRAE 3 calibration gas cylinder already own QRAE 3, so the fastest check is the model label on the back of the unit. If the label is worn or the unit is an older or modified configuration, call us with the serial number and we will verify fit against the QRAE 3 before anything ships.
Bump test the monitor after any repair or consumable change, and calibrate per the manufacturer's instructions and your site procedure.
PK Safety is a Factory Authorized RAE Systems Service Center with in-house technicians, so this QRAE 3 calibration gas cylinder ships from the shop that services your monitor. Questions on fit or quantity? Call 800.829.9580.
Part Number:
600-0050-007
Frequently Asked Questions
What is in the 600-0050-007 cylinder?
50 percent methane for LEL span, 18 percent oxygen for the O2 channel, 10 ppm H2S, and 50 ppm CO, with nitrogen balance. One mix covers all four standard QRAE 3 channels in a single bump test or calibration.
Which regulator do I use with it?
Use the 0.5 LPM regulator, part number 002-3011-000. The 1 LPM regulator is sized for 58L and 103L cylinders and is for pumped-monitor sampling draw, not for the 34L bottle.
Is 600-0050-007 compatible with my QRAE 3?
Yes, this is the RAE Systems calibration gas mix for the QRAE 3. For other RAE monitors, call us and we will match the correct cylinder to your sensor loadout.
Do I need to recalibrate after swapping cylinders?
Changing the cylinder does not require recalibration on its own. Use the fresh cylinder during the next scheduled calibration per the manufacturer's instructions and your site procedure.
Related Searches
Calibration Gas, RAE Systems, Gas Detection, Gas Detector Accessories
Specifications
Specifications
-
Type
-
Gas Type
-
Product Weight (lbs.)
-
Height (in.)
-
Length (in.)
-
Width (in.)
-
Country of Origin
Reviews (3)
Reviews (3)
Keep your team protected & compliant!
- Expert guidance tailored to your specific needs
- Access responsive customer support when you need it
- Enjoy fast shipping directly to your location
- Benefit from extensive industry knowledge—75+ years of experience
- In-house gas detection calibration & repair services available
