RAE Systems PpbRAE 3000 Monitor
Description
The RAE Systems ppbRAE 3000 is a handheld photoionization detector built for jobs where parts-per-billion sensitivity matters: environmental remediation, indoor air investigations, fenceline monitoring, HazMat response, and industrial-hygiene surveys of low-level VOC exposure. A third-generation 10.6 eV PID lamp, humidity compensation, and on-board correction factors for more than 350 compounds let a crew see unknown VOC concentrations in real time, from 1 ppb up to 10,000 ppm, with a three-second response. Browse the full RAE Systems family or step up from the standard-range MiniRAE 3000+ when a job calls for ppb resolution.
Specifications
- 3rd-generation 10.6 eV PID; range 1 ppb to 10,000 ppm (isobutylene-referenced)
- Three-second response, humidity compensation, patented PID lamp auto-cleaning
- Integrated sample pump draws from up to 100 feet
- On-board correction factors for more than 350 compounds
- Optional built-in Bluetooth wireless, transmits up to 2 miles to a RAELink3 router
- Large display reports gas type, correction factor, and concentration
- Operable with three layers of gloves; built-in flashlight
- MIL-STD-810F rugged housing for harsh environments
- Multi-language capability — up to 10 languages
- Includes hard transport case, charging/download cradle, filters and O-rings, outlet port adapter and tubing, 10 ppm isobutylene calibration gas (34L), regulator and flow controller
Applications
- CBRNE and HazMat response
- Environmental cleanups and remediation
- Oil & gas, refinery, and fenceline monitoring
- Industrial hygiene and worker exposure surveys
- Indoor air quality and leak investigations
- Urban search & rescue and civil defense
Compatibility and Service
PK Safety is a RAE Systems Factory Authorized Service Center. Our in-house RAE technicians calibrate, bump test, and repair the ppbRAE 3000. We also service BW Technologies by Honeywell, RKI Instruments, and WatchGas monitors. Call 800.829.9580 for sensor-configuration questions, service scheduling, or sizing help.
Part Number:
059-C111-100 — Monitor with Li-ion/Universal charger, accessory kit, calibration kit, and wireless Bluetooth
Specification Sheet:
Frequently Asked Questions
Why pick the ppbRAE 3000 over the MiniRAE 3000+?
The ppbRAE 3000 reads VOCs down to 1 ppb, where the MiniRAE 3000+ starts at 100 ppb. Choose the ppbRAE for environmental remediation, fenceline work, indoor air investigations, and low-level industrial-hygiene surveys where single-digit ppb matters. The MiniRAE 3000+ is the better pick for emergency response and confined-space entry where upper-range headroom (0 to 15,000 ppm) outweighs ppb resolution.
What VOCs will the ppbRAE 3000 detect?
The 10.6 eV lamp ionizes most volatile organics with ionization potentials at or below 10.6 eV, including benzene, toluene, xylene, hexane, perchloroethylene, methyl ethyl ketone, and more than 350 other compounds with published RAE correction factors. The reading is total ionizable VOC referenced to isobutylene; apply the on-board correction factor to display in target-compound ppm. It does not read methane, ethane, or other low-energy hydrocarbons that fall outside the 10.6 eV window.
Is the ppbRAE 3000 intrinsically safe for hazardous locations?
Yes. The ppbRAE 3000 carries IECEx and ATEX intrinsically safe approvals and is listed by UL for use in Class I Division 1 Groups A, B, C, D hazardous locations. Confirm the specific marking on the instrument label matches your area classification before entry. Call 800.829.9580 if you need the current approval sheet for a permit submittal.
How often should the ppbRAE 3000 be bump tested and calibrated?
Follow OSHA Safety and Health Information Bulletin SHIB 09-30-13, which calls for a functional bump test with a known concentration of target gas before each day's use on any portable gas monitor and a full calibration whenever a bump test fails, after any sensor or lamp change, or on the manufacturer's scheduled interval. RAE Systems recommends a full calibration of the ppbRAE 3000 every 180 days under normal use conditions. The ppbRAE 3000 ships with a 10 ppm isobutylene cylinder and regulator for span calibration.
Can the ppbRAE 3000 transmit readings wirelessly?
Yes, with the built-in Bluetooth option. Paired with a RAELink3 wireless router, the ppbRAE 3000 transmits readings and alarm status up to two miles for closed-loop remote monitoring, so a safety officer sees what the entry team sees. The Bluetooth option is standard on the 059-C111-100 configuration listed above.
Who services the ppbRAE 3000 when it fails?
PK Safety is a RAE Systems Factory Authorized Service Center. Our in-house technicians handle lamp cleaning and replacement, pump service, sensor replacement, firmware updates, and full calibration from our Alameda, California shop. Email service@pksafety.com or call 800.829.9580 to open a service ticket.
Related Searches
RAE Systems, Gas Detection, Single-Gas Monitors, Calibration Gas, Gas Detector Accessories
Read more
Description
The RAE Systems ppbRAE 3000 is a handheld photoionization detector built for jobs where parts-per-billion sensitivity matters: environmental remediation, indoor air investigations, fenceline monitoring, HazMat response, and industrial-hygiene surveys of low-level VOC exposure. A third-generation 10.6 eV PID lamp, humidity compensation, and on-board correction factors for more than 350 compounds let a crew see unknown VOC concentrations in real time, from 1 ppb up to 10,000 ppm, with a three-second response. Browse the full RAE Systems family or step up from the standard-range MiniRAE 3000+ when a job calls for ppb resolution.
Specifications
- 3rd-generation 10.6 eV PID; range 1 ppb to 10,000 ppm (isobutylene-referenced)
- Three-second response, humidity compensation, patented PID lamp auto-cleaning
- Integrated sample pump draws from up to 100 feet
- On-board correction factors for more than 350 compounds
- Optional built-in Bluetooth wireless, transmits up to 2 miles to a RAELink3 router
- Large display reports gas type, correction factor, and concentration
- Operable with three layers of gloves; built-in flashlight
- MIL-STD-810F rugged housing for harsh environments
- Multi-language capability — up to 10 languages
- Includes hard transport case, charging/download cradle, filters and O-rings, outlet port adapter and tubing, 10 ppm isobutylene calibration gas (34L), regulator and flow controller
Applications
- CBRNE and HazMat response
- Environmental cleanups and remediation
- Oil & gas, refinery, and fenceline monitoring
- Industrial hygiene and worker exposure surveys
- Indoor air quality and leak investigations
- Urban search & rescue and civil defense
Compatibility and Service
PK Safety is a RAE Systems Factory Authorized Service Center. Our in-house RAE technicians calibrate, bump test, and repair the ppbRAE 3000. We also service BW Technologies by Honeywell, RKI Instruments, and WatchGas monitors. Call 800.829.9580 for sensor-configuration questions, service scheduling, or sizing help.
Part Number:
059-C111-100 — Monitor with Li-ion/Universal charger, accessory kit, calibration kit, and wireless Bluetooth
Specification Sheet:
Frequently Asked Questions
Why pick the ppbRAE 3000 over the MiniRAE 3000+?
The ppbRAE 3000 reads VOCs down to 1 ppb, where the MiniRAE 3000+ starts at 100 ppb. Choose the ppbRAE for environmental remediation, fenceline work, indoor air investigations, and low-level industrial-hygiene surveys where single-digit ppb matters. The MiniRAE 3000+ is the better pick for emergency response and confined-space entry where upper-range headroom (0 to 15,000 ppm) outweighs ppb resolution.
What VOCs will the ppbRAE 3000 detect?
The 10.6 eV lamp ionizes most volatile organics with ionization potentials at or below 10.6 eV, including benzene, toluene, xylene, hexane, perchloroethylene, methyl ethyl ketone, and more than 350 other compounds with published RAE correction factors. The reading is total ionizable VOC referenced to isobutylene; apply the on-board correction factor to display in target-compound ppm. It does not read methane, ethane, or other low-energy hydrocarbons that fall outside the 10.6 eV window.
Is the ppbRAE 3000 intrinsically safe for hazardous locations?
Yes. The ppbRAE 3000 carries IECEx and ATEX intrinsically safe approvals and is listed by UL for use in Class I Division 1 Groups A, B, C, D hazardous locations. Confirm the specific marking on the instrument label matches your area classification before entry. Call 800.829.9580 if you need the current approval sheet for a permit submittal.
How often should the ppbRAE 3000 be bump tested and calibrated?
Follow OSHA Safety and Health Information Bulletin SHIB 09-30-13, which calls for a functional bump test with a known concentration of target gas before each day's use on any portable gas monitor and a full calibration whenever a bump test fails, after any sensor or lamp change, or on the manufacturer's scheduled interval. RAE Systems recommends a full calibration of the ppbRAE 3000 every 180 days under normal use conditions. The ppbRAE 3000 ships with a 10 ppm isobutylene cylinder and regulator for span calibration.
Can the ppbRAE 3000 transmit readings wirelessly?
Yes, with the built-in Bluetooth option. Paired with a RAELink3 wireless router, the ppbRAE 3000 transmits readings and alarm status up to two miles for closed-loop remote monitoring, so a safety officer sees what the entry team sees. The Bluetooth option is standard on the 059-C111-100 configuration listed above.
Who services the ppbRAE 3000 when it fails?
PK Safety is a RAE Systems Factory Authorized Service Center. Our in-house technicians handle lamp cleaning and replacement, pump service, sensor replacement, firmware updates, and full calibration from our Alameda, California shop. Email service@pksafety.com or call 800.829.9580 to open a service ticket.
Related Searches
RAE Systems, Gas Detection, Single-Gas Monitors, Calibration Gas, Gas Detector Accessories
The RAE Systems ppbRAE 3000 is a handheld photoionization detector built for jobs where parts-per-billion sensitivity matters: environmental remediation, indoor air investigations, fenceline monitoring, HazMat response, and industrial-hygiene surveys of low-level VOC exposure. A third-generation 10.6 eV PID lamp, humidity compensation, and on-board correction factors for more than 350 compounds let a crew see unknown VOC concentrations in real time, from 1 ppb up to 10,000 ppm, with a three-second response. Browse the full RAE Systems family or step up from the standard-range MiniRAE 3000+ when a job calls for ppb resolution.
Specifications
- 3rd-generation 10.6 eV PID; range 1 ppb to 10,000 ppm (isobutylene-referenced)
- Three-second response, humidity compensation, patented PID lamp auto-cleaning
- Integrated sample pump draws from up to 100 feet
- On-board correction factors for more than 350 compounds
- Optional built-in Bluetooth wireless, transmits up to 2 miles to a RAELink3 router
- Large display reports gas type, correction factor, and concentration
- Operable with three layers of gloves; built-in flashlight
- MIL-STD-810F rugged housing for harsh environments
- Multi-language capability — up to 10 languages
- Includes hard transport case, charging/download cradle, filters and O-rings, outlet port adapter and tubing, 10 ppm isobutylene calibration gas (34L), regulator and flow controller
Applications
- CBRNE and HazMat response
- Environmental cleanups and remediation
- Oil & gas, refinery, and fenceline monitoring
- Industrial hygiene and worker exposure surveys
- Indoor air quality and leak investigations
- Urban search & rescue and civil defense
Compatibility and Service
PK Safety is a RAE Systems Factory Authorized Service Center. Our in-house RAE technicians calibrate, bump test, and repair the ppbRAE 3000. We also service BW Technologies by Honeywell, RKI Instruments, and WatchGas monitors. Call 800.829.9580 for sensor-configuration questions, service scheduling, or sizing help.
Part Number:
059-C111-100 — Monitor with Li-ion/Universal charger, accessory kit, calibration kit, and wireless Bluetooth
Specification Sheet:
Frequently Asked Questions
Why pick the ppbRAE 3000 over the MiniRAE 3000+?
The ppbRAE 3000 reads VOCs down to 1 ppb, where the MiniRAE 3000+ starts at 100 ppb. Choose the ppbRAE for environmental remediation, fenceline work, indoor air investigations, and low-level industrial-hygiene surveys where single-digit ppb matters. The MiniRAE 3000+ is the better pick for emergency response and confined-space entry where upper-range headroom (0 to 15,000 ppm) outweighs ppb resolution.
What VOCs will the ppbRAE 3000 detect?
The 10.6 eV lamp ionizes most volatile organics with ionization potentials at or below 10.6 eV, including benzene, toluene, xylene, hexane, perchloroethylene, methyl ethyl ketone, and more than 350 other compounds with published RAE correction factors. The reading is total ionizable VOC referenced to isobutylene; apply the on-board correction factor to display in target-compound ppm. It does not read methane, ethane, or other low-energy hydrocarbons that fall outside the 10.6 eV window.
Is the ppbRAE 3000 intrinsically safe for hazardous locations?
Yes. The ppbRAE 3000 carries IECEx and ATEX intrinsically safe approvals and is listed by UL for use in Class I Division 1 Groups A, B, C, D hazardous locations. Confirm the specific marking on the instrument label matches your area classification before entry. Call 800.829.9580 if you need the current approval sheet for a permit submittal.
How often should the ppbRAE 3000 be bump tested and calibrated?
Follow OSHA Safety and Health Information Bulletin SHIB 09-30-13, which calls for a functional bump test with a known concentration of target gas before each day's use on any portable gas monitor and a full calibration whenever a bump test fails, after any sensor or lamp change, or on the manufacturer's scheduled interval. RAE Systems recommends a full calibration of the ppbRAE 3000 every 180 days under normal use conditions. The ppbRAE 3000 ships with a 10 ppm isobutylene cylinder and regulator for span calibration.
Can the ppbRAE 3000 transmit readings wirelessly?
Yes, with the built-in Bluetooth option. Paired with a RAELink3 wireless router, the ppbRAE 3000 transmits readings and alarm status up to two miles for closed-loop remote monitoring, so a safety officer sees what the entry team sees. The Bluetooth option is standard on the 059-C111-100 configuration listed above.
Who services the ppbRAE 3000 when it fails?
PK Safety is a RAE Systems Factory Authorized Service Center. Our in-house technicians handle lamp cleaning and replacement, pump service, sensor replacement, firmware updates, and full calibration from our Alameda, California shop. Email service@pksafety.com or call 800.829.9580 to open a service ticket.
Related Searches
RAE Systems, Gas Detection, Single-Gas Monitors, Calibration Gas, Gas Detector Accessories
Specifications
Specifications
-
Type
-
Gas Type
-
Height (in.)
-
Length (in.)
-
Width (in.)
-
Country of Origin
Reviews
Reviews
Keep your team protected & compliant!
- Expert guidance tailored to your specific needs
- Access responsive customer support when you need it
- Enjoy fast shipping directly to your location
- Benefit from extensive industry knowledge—75+ years of experience
- In-house gas detection calibration & repair services available
