AimSafety Cal-Gas Carbon Dioxide, Bal/N2, 34L 37-0072-4234-1
Description
The AimSafety Carbon Dioxide Calibration Gas delivers a 20,000 ppm challenge mix in a 34 Liter non-reactive cylinder for AimSafety PM-series single-gas monitors. Keep your fleet in spec: scheduled bump tests and full calibrations are the only way to prove that a Carbon Dioxide sensor is still reading correctly before the next shift.
Use cases: breweries, greenhouses, HVAC commissioning, and confined-space pre-entry sweeps where elevated CO2 is the primary hazard. Keep a spare 34L cylinder on hand so calibration day never stalls on a backordered consumable.
Specifications
- Target gas: Carbon Dioxide (CO2)
- Concentration: 20,000 ppm
- Cylinder volume: 34 Liter
- Mixture: Carbon Dioxide, balance nitrogen (N2)
- Non-reactive aluminum cylinder with C-10 connection
- NIST-traceable blend with lot certificate
- Shelf life printed on cylinder (typical 12–36 months depending on gas)
- Made in the USA
Compatibility and Service
This cylinder is matched to the AimSafety PM150-CO2 Carbon Dioxide Single-Gas Monitor. Use with the AimSafety Single-Gas Monitor Calibration/Bump Test Station or the demand-flow regulator of your choice. PK Safety services and calibrates AimSafety instruments; call 800.829.9580 to schedule bench work or for help sizing gas by fleet count.
Part Number: 37-0072-4234-1
How Often Do I Need To Calibrate (PDF)
Frequently Asked Questions
How often should I calibrate the AimSafety PM150-CO2 Carbon Dioxide Single-Gas Monitor?
Full calibration every 180 days is typical; bump-test before each day of use. Follow your site safety plan and the manufacturer manual.
How does this cylinder ship?
This item ships via UPS Ground only due to HazMat regulations. Air freight is not available.
What regulator do I need?
A fixed-flow regulator sized to the AimSafety monitor is standard. For pumped instruments, use a demand-flow regulator instead.
Can PK Safety calibrate my AimSafety monitor?
Yes. PK Safety services and calibrates AimSafety instruments. Call 800.829.9580 to schedule.
Related Searches: Calibration Gas , AimSafety , Regulators , Gas Detector Accessories
Read more
Description
The AimSafety Carbon Dioxide Calibration Gas delivers a 20,000 ppm challenge mix in a 34 Liter non-reactive cylinder for AimSafety PM-series single-gas monitors. Keep your fleet in spec: scheduled bump tests and full calibrations are the only way to prove that a Carbon Dioxide sensor is still reading correctly before the next shift.
Use cases: breweries, greenhouses, HVAC commissioning, and confined-space pre-entry sweeps where elevated CO2 is the primary hazard. Keep a spare 34L cylinder on hand so calibration day never stalls on a backordered consumable.
Specifications
- Target gas: Carbon Dioxide (CO2)
- Concentration: 20,000 ppm
- Cylinder volume: 34 Liter
- Mixture: Carbon Dioxide, balance nitrogen (N2)
- Non-reactive aluminum cylinder with C-10 connection
- NIST-traceable blend with lot certificate
- Shelf life printed on cylinder (typical 12–36 months depending on gas)
- Made in the USA
Compatibility and Service
This cylinder is matched to the AimSafety PM150-CO2 Carbon Dioxide Single-Gas Monitor. Use with the AimSafety Single-Gas Monitor Calibration/Bump Test Station or the demand-flow regulator of your choice. PK Safety services and calibrates AimSafety instruments; call 800.829.9580 to schedule bench work or for help sizing gas by fleet count.
Part Number: 37-0072-4234-1
How Often Do I Need To Calibrate (PDF)
Frequently Asked Questions
How often should I calibrate the AimSafety PM150-CO2 Carbon Dioxide Single-Gas Monitor?
Full calibration every 180 days is typical; bump-test before each day of use. Follow your site safety plan and the manufacturer manual.
How does this cylinder ship?
This item ships via UPS Ground only due to HazMat regulations. Air freight is not available.
What regulator do I need?
A fixed-flow regulator sized to the AimSafety monitor is standard. For pumped instruments, use a demand-flow regulator instead.
Can PK Safety calibrate my AimSafety monitor?
Yes. PK Safety services and calibrates AimSafety instruments. Call 800.829.9580 to schedule.
Related Searches: Calibration Gas , AimSafety , Regulators , Gas Detector Accessories
The AimSafety Carbon Dioxide Calibration Gas delivers a 20,000 ppm challenge mix in a 34 Liter non-reactive cylinder for AimSafety PM-series single-gas monitors. Keep your fleet in spec: scheduled bump tests and full calibrations are the only way to prove that a Carbon Dioxide sensor is still reading correctly before the next shift.
Use cases: breweries, greenhouses, HVAC commissioning, and confined-space pre-entry sweeps where elevated CO2 is the primary hazard. Keep a spare 34L cylinder on hand so calibration day never stalls on a backordered consumable.
Specifications
- Target gas: Carbon Dioxide (CO2)
- Concentration: 20,000 ppm
- Cylinder volume: 34 Liter
- Mixture: Carbon Dioxide, balance nitrogen (N2)
- Non-reactive aluminum cylinder with C-10 connection
- NIST-traceable blend with lot certificate
- Shelf life printed on cylinder (typical 12–36 months depending on gas)
- Made in the USA
Compatibility and Service
This cylinder is matched to the AimSafety PM150-CO2 Carbon Dioxide Single-Gas Monitor. Use with the AimSafety Single-Gas Monitor Calibration/Bump Test Station or the demand-flow regulator of your choice. PK Safety services and calibrates AimSafety instruments; call 800.829.9580 to schedule bench work or for help sizing gas by fleet count.
Part Number: 37-0072-4234-1
How Often Do I Need To Calibrate (PDF)
Frequently Asked Questions
How often should I calibrate the AimSafety PM150-CO2 Carbon Dioxide Single-Gas Monitor?
Full calibration every 180 days is typical; bump-test before each day of use. Follow your site safety plan and the manufacturer manual.
How does this cylinder ship?
This item ships via UPS Ground only due to HazMat regulations. Air freight is not available.
What regulator do I need?
A fixed-flow regulator sized to the AimSafety monitor is standard. For pumped instruments, use a demand-flow regulator instead.
Can PK Safety calibrate my AimSafety monitor?
Yes. PK Safety services and calibrates AimSafety instruments. Call 800.829.9580 to schedule.
Related Searches: Calibration Gas , AimSafety , Regulators , Gas Detector Accessories
Specifications
Specifications
-
Type
-
Gas Type
-
Product Weight (lbs.)
-
Height (in.)
-
Length (in.)
-
Width (in.)
-
Country of Origin
Reviews
Reviews
Keep your team protected & compliant!
- Expert guidance tailored to your specific needs
- Access responsive customer support when you need it
- Enjoy fast shipping directly to your location
- Benefit from extensive industry knowledge—75+ years of experience
- In-house gas detection calibration & repair services available
