RAE Systems PGM-2500 QRAE 3 Wireless Pumped Multi-Gas Monitor M020-...
Description
The RAE Systems QRAE 3 Wireless Pumped (PGM-2500, part M020-11211-111) is a four-sensor confined-space monitor built for permit-required entry work where a safety officer wants real-time wireless visibility into the entry team's readings. The internal sample pump draws air through up to 10 feet of probe tubing for pre-entry sampling, the 95 dB audible alarm and Man Down function cover the operator, and the built-in wireless radio closes the loop back to an EchoView Host Mini-Controller. Compare the two siblings when wireless is not needed: QRAE 3 Non-Wireless Pumped or QRAE 3 Non-Wireless Diffusion.
Specifications
- Sensors: LEL (catalytic), O2, CO, H2S — confined-space standard four-gas
- Sampling: internal pump, remote draw to 10 ft
- Wireless: built-in RAE mesh radio; pairs with EchoView Host for closed-loop monitoring
- Alarms: five-way (local audible 95 dB, visual, vibratory, plus remote wireless); Man Down alarm
- Display: large graphical LCD with 17-language icon-driven interface
- Battery: Lithium-ion rechargeable, universal wall adapter; included travel charger cradle with PC cable
- Housing: IP-65/67 water- and dust-resistant; concussion-proof
- Weight: 14.5 oz
- Intrinsic-safety certifications: CSA Class I Division 1 Groups A, B, C, D (T4); ATEX II 1G Ex ia IIC T4; IECEx Ex ia IIC T4
- Includes Lithium-ion battery pack, universal wall adapter, travel charger cradle, external filters, ProRAE Studio II CD, quick reference guide
Applications
- Permit-required confined-space entry (vaults, tanks, manholes, lift stations)
- Fire and emergency response (fireground "toxic twins" CO + HCN screening)
- Oil & gas, refinery, and petrochemical
- Utility, wastewater, and sewer entry
- Industrial safety and plant turnaround
Compatibility and Service
PK Safety is a RAE Systems Factory Authorized Service Center. Our in-house RAE technicians calibrate, bump test, and repair the QRAE 3 Wireless Pumped at our Alameda, California service lab. We also service BW Technologies by Honeywell, RKI Instruments, and WatchGas monitors — a mixed fleet can be sent in one shipment. Call 800.829.9580 for sensor-configuration questions, service scheduling, or sizing help.
Part Numbers:
M020-11211-111 — Monitor (this listing)
020-0040-010 — Confined Space Kit 1: hard transport case with pre-cut foam, tool kit, hand pump, 10-inch stiff aluminum sample probe with replaceable filter, 6 ft Tygon tubing, external filter 3-pack
Frequently Asked Questions
When should I pick the wireless QRAE 3 over the non-wireless pumped version?
Pick the wireless M020-11211-111 whenever a safety officer or hole watch needs real-time visibility into the entry team's readings and alarm status from a remote location — the EchoView Host closed-loop system shows every paired monitor on one screen. Pick the non-wireless pumped M020-11111-111 for solo work or where radio traffic is restricted; the sensors and pump are identical.
What does the standard QRAE 3 four-gas configuration detect?
LEL combustibles (catalytic bead, 0 to 100% LEL), O2 (0 to 30% vol), CO (0 to 500 ppm), and H2S (0 to 100 ppm) — the confined-space standard set. The QRAE 3 platform also supports SO2 and HCN sensor options on request.
Is the QRAE 3 intrinsically safe for Class I Division 1?
Yes. The QRAE 3 carries CSA Class I Division 1 Groups A, B, C, D (T4), ATEX II 1G Ex ia IIC T4, and IECEx Ex ia IIC T4 markings. Confirm the specific marking on the instrument label matches your area classification before entry; call 800.829.9580 if you need the current approval sheet for a permit submittal.
How often should the QRAE 3 be bump tested and calibrated?
Follow OSHA Safety and Health Information Bulletin SHIB 09-30-13, which calls for a functional bump test with a known concentration of target gas before each day's use on any portable gas monitor and a full calibration whenever a bump test fails, after a sensor change, or on RAE's recommended 180-day interval. RAE's own documentation reinforces the six-month full-calibration cadence with regular bump tests between.
What calibration gas and accessories does the QRAE 3 need?
Use a confined-space 4-gas mix (typically 50% LEL methane, 18% O2, 10 ppm H2S, 50 ppm CO in a 34L cylinder) with a RAE fixed-flow regulator. Pre-entry sampling calls for the Confined Space Kit 1 (020-0040-010) with hand pump, aluminum sample probe, and Tygon tubing. Both the gas and the CSK are stocked under Calibration Gas and Gas Detector Accessories.
Who services the QRAE 3 and the EchoView Host?
PK Safety is a RAE Systems Factory Authorized Service Center. Our in-house RAE technicians handle sensor replacement, pump service, radio pairing, firmware updates, and full calibration for both the QRAE 3 and the EchoView Host from our Alameda, California shop. Call 800.829.9580 to open a service ticket.
Related Searches
RAE Systems, Gas Detection, Multi-Gas Monitors, Confined Space, Calibration Gas, Gas Detector Accessories
Read more
Description
The RAE Systems QRAE 3 Wireless Pumped (PGM-2500, part M020-11211-111) is a four-sensor confined-space monitor built for permit-required entry work where a safety officer wants real-time wireless visibility into the entry team's readings. The internal sample pump draws air through up to 10 feet of probe tubing for pre-entry sampling, the 95 dB audible alarm and Man Down function cover the operator, and the built-in wireless radio closes the loop back to an EchoView Host Mini-Controller. Compare the two siblings when wireless is not needed: QRAE 3 Non-Wireless Pumped or QRAE 3 Non-Wireless Diffusion.
Specifications
- Sensors: LEL (catalytic), O2, CO, H2S — confined-space standard four-gas
- Sampling: internal pump, remote draw to 10 ft
- Wireless: built-in RAE mesh radio; pairs with EchoView Host for closed-loop monitoring
- Alarms: five-way (local audible 95 dB, visual, vibratory, plus remote wireless); Man Down alarm
- Display: large graphical LCD with 17-language icon-driven interface
- Battery: Lithium-ion rechargeable, universal wall adapter; included travel charger cradle with PC cable
- Housing: IP-65/67 water- and dust-resistant; concussion-proof
- Weight: 14.5 oz
- Intrinsic-safety certifications: CSA Class I Division 1 Groups A, B, C, D (T4); ATEX II 1G Ex ia IIC T4; IECEx Ex ia IIC T4
- Includes Lithium-ion battery pack, universal wall adapter, travel charger cradle, external filters, ProRAE Studio II CD, quick reference guide
Applications
- Permit-required confined-space entry (vaults, tanks, manholes, lift stations)
- Fire and emergency response (fireground "toxic twins" CO + HCN screening)
- Oil & gas, refinery, and petrochemical
- Utility, wastewater, and sewer entry
- Industrial safety and plant turnaround
Compatibility and Service
PK Safety is a RAE Systems Factory Authorized Service Center. Our in-house RAE technicians calibrate, bump test, and repair the QRAE 3 Wireless Pumped at our Alameda, California service lab. We also service BW Technologies by Honeywell, RKI Instruments, and WatchGas monitors — a mixed fleet can be sent in one shipment. Call 800.829.9580 for sensor-configuration questions, service scheduling, or sizing help.
Part Numbers:
M020-11211-111 — Monitor (this listing)
020-0040-010 — Confined Space Kit 1: hard transport case with pre-cut foam, tool kit, hand pump, 10-inch stiff aluminum sample probe with replaceable filter, 6 ft Tygon tubing, external filter 3-pack
Frequently Asked Questions
When should I pick the wireless QRAE 3 over the non-wireless pumped version?
Pick the wireless M020-11211-111 whenever a safety officer or hole watch needs real-time visibility into the entry team's readings and alarm status from a remote location — the EchoView Host closed-loop system shows every paired monitor on one screen. Pick the non-wireless pumped M020-11111-111 for solo work or where radio traffic is restricted; the sensors and pump are identical.
What does the standard QRAE 3 four-gas configuration detect?
LEL combustibles (catalytic bead, 0 to 100% LEL), O2 (0 to 30% vol), CO (0 to 500 ppm), and H2S (0 to 100 ppm) — the confined-space standard set. The QRAE 3 platform also supports SO2 and HCN sensor options on request.
Is the QRAE 3 intrinsically safe for Class I Division 1?
Yes. The QRAE 3 carries CSA Class I Division 1 Groups A, B, C, D (T4), ATEX II 1G Ex ia IIC T4, and IECEx Ex ia IIC T4 markings. Confirm the specific marking on the instrument label matches your area classification before entry; call 800.829.9580 if you need the current approval sheet for a permit submittal.
How often should the QRAE 3 be bump tested and calibrated?
Follow OSHA Safety and Health Information Bulletin SHIB 09-30-13, which calls for a functional bump test with a known concentration of target gas before each day's use on any portable gas monitor and a full calibration whenever a bump test fails, after a sensor change, or on RAE's recommended 180-day interval. RAE's own documentation reinforces the six-month full-calibration cadence with regular bump tests between.
What calibration gas and accessories does the QRAE 3 need?
Use a confined-space 4-gas mix (typically 50% LEL methane, 18% O2, 10 ppm H2S, 50 ppm CO in a 34L cylinder) with a RAE fixed-flow regulator. Pre-entry sampling calls for the Confined Space Kit 1 (020-0040-010) with hand pump, aluminum sample probe, and Tygon tubing. Both the gas and the CSK are stocked under Calibration Gas and Gas Detector Accessories.
Who services the QRAE 3 and the EchoView Host?
PK Safety is a RAE Systems Factory Authorized Service Center. Our in-house RAE technicians handle sensor replacement, pump service, radio pairing, firmware updates, and full calibration for both the QRAE 3 and the EchoView Host from our Alameda, California shop. Call 800.829.9580 to open a service ticket.
Related Searches
RAE Systems, Gas Detection, Multi-Gas Monitors, Confined Space, Calibration Gas, Gas Detector Accessories
The RAE Systems QRAE 3 Wireless Pumped (PGM-2500, part M020-11211-111) is a four-sensor confined-space monitor built for permit-required entry work where a safety officer wants real-time wireless visibility into the entry team's readings. The internal sample pump draws air through up to 10 feet of probe tubing for pre-entry sampling, the 95 dB audible alarm and Man Down function cover the operator, and the built-in wireless radio closes the loop back to an EchoView Host Mini-Controller. Compare the two siblings when wireless is not needed: QRAE 3 Non-Wireless Pumped or QRAE 3 Non-Wireless Diffusion.
Specifications
- Sensors: LEL (catalytic), O2, CO, H2S — confined-space standard four-gas
- Sampling: internal pump, remote draw to 10 ft
- Wireless: built-in RAE mesh radio; pairs with EchoView Host for closed-loop monitoring
- Alarms: five-way (local audible 95 dB, visual, vibratory, plus remote wireless); Man Down alarm
- Display: large graphical LCD with 17-language icon-driven interface
- Battery: Lithium-ion rechargeable, universal wall adapter; included travel charger cradle with PC cable
- Housing: IP-65/67 water- and dust-resistant; concussion-proof
- Weight: 14.5 oz
- Intrinsic-safety certifications: CSA Class I Division 1 Groups A, B, C, D (T4); ATEX II 1G Ex ia IIC T4; IECEx Ex ia IIC T4
- Includes Lithium-ion battery pack, universal wall adapter, travel charger cradle, external filters, ProRAE Studio II CD, quick reference guide
Applications
- Permit-required confined-space entry (vaults, tanks, manholes, lift stations)
- Fire and emergency response (fireground "toxic twins" CO + HCN screening)
- Oil & gas, refinery, and petrochemical
- Utility, wastewater, and sewer entry
- Industrial safety and plant turnaround
Compatibility and Service
PK Safety is a RAE Systems Factory Authorized Service Center. Our in-house RAE technicians calibrate, bump test, and repair the QRAE 3 Wireless Pumped at our Alameda, California service lab. We also service BW Technologies by Honeywell, RKI Instruments, and WatchGas monitors — a mixed fleet can be sent in one shipment. Call 800.829.9580 for sensor-configuration questions, service scheduling, or sizing help.
Part Numbers:
M020-11211-111 — Monitor (this listing)
020-0040-010 — Confined Space Kit 1: hard transport case with pre-cut foam, tool kit, hand pump, 10-inch stiff aluminum sample probe with replaceable filter, 6 ft Tygon tubing, external filter 3-pack
Frequently Asked Questions
When should I pick the wireless QRAE 3 over the non-wireless pumped version?
Pick the wireless M020-11211-111 whenever a safety officer or hole watch needs real-time visibility into the entry team's readings and alarm status from a remote location — the EchoView Host closed-loop system shows every paired monitor on one screen. Pick the non-wireless pumped M020-11111-111 for solo work or where radio traffic is restricted; the sensors and pump are identical.
What does the standard QRAE 3 four-gas configuration detect?
LEL combustibles (catalytic bead, 0 to 100% LEL), O2 (0 to 30% vol), CO (0 to 500 ppm), and H2S (0 to 100 ppm) — the confined-space standard set. The QRAE 3 platform also supports SO2 and HCN sensor options on request.
Is the QRAE 3 intrinsically safe for Class I Division 1?
Yes. The QRAE 3 carries CSA Class I Division 1 Groups A, B, C, D (T4), ATEX II 1G Ex ia IIC T4, and IECEx Ex ia IIC T4 markings. Confirm the specific marking on the instrument label matches your area classification before entry; call 800.829.9580 if you need the current approval sheet for a permit submittal.
How often should the QRAE 3 be bump tested and calibrated?
Follow OSHA Safety and Health Information Bulletin SHIB 09-30-13, which calls for a functional bump test with a known concentration of target gas before each day's use on any portable gas monitor and a full calibration whenever a bump test fails, after a sensor change, or on RAE's recommended 180-day interval. RAE's own documentation reinforces the six-month full-calibration cadence with regular bump tests between.
What calibration gas and accessories does the QRAE 3 need?
Use a confined-space 4-gas mix (typically 50% LEL methane, 18% O2, 10 ppm H2S, 50 ppm CO in a 34L cylinder) with a RAE fixed-flow regulator. Pre-entry sampling calls for the Confined Space Kit 1 (020-0040-010) with hand pump, aluminum sample probe, and Tygon tubing. Both the gas and the CSK are stocked under Calibration Gas and Gas Detector Accessories.
Who services the QRAE 3 and the EchoView Host?
PK Safety is a RAE Systems Factory Authorized Service Center. Our in-house RAE technicians handle sensor replacement, pump service, radio pairing, firmware updates, and full calibration for both the QRAE 3 and the EchoView Host from our Alameda, California shop. Call 800.829.9580 to open a service ticket.
Related Searches
RAE Systems, Gas Detection, Multi-Gas Monitors, Confined Space, Calibration Gas, Gas Detector Accessories
Specifications
Specifications
-
Gas Type
-
Product Weight (lbs.)
-
Height (in.)
-
Length (in.)
-
Width (in.)
-
Country of Origin
Reviews
Reviews
Keep your team protected & compliant!
- Expert guidance tailored to your specific needs
- Access responsive customer support when you need it
- Enjoy fast shipping directly to your location
- Benefit from extensive industry knowledge—75+ years of experience
- In-house gas detection calibration & repair services available
