RAE Benzene Separation Tubes Cartridges M01-0312-000
Description
Note: This is a "Special Order" product that cannot be exchanged and is non-returnable.
These benzene separation tube cartridges are a consumable used with the RAE Systems MultiRAE Benzene (the benzene-sampling MultiRAE configuration built on the MultiRAE platform). M01-0312-000 is a cartridge pack that drops into the MultiRAE Benzene inlet and separates benzene from other VOCs during a sample draw, so the PID channel reports a benzene reading instead of a total-VOC number.
Fit and Specifications
- Benzene separation tube cartridges, part number M01-0312-000
- Cartridge format designed for the MultiRAE Benzene inlet
- Separates benzene from other VOCs during the draw
- Single-use; load one cartridge per sample run
- Treat as a Special Order (see note on this page)
Compatibility and Ordering
Match the part number (M01-0312-000) to the part you are replacing, and confirm your monitor model before you order. Buyers of this benzene tube cartridges already own MultiRAE, so the fastest check is the model label on the back of the unit. If the label is worn or the unit is an older or modified configuration, call us with the serial number and we will verify fit against the MultiRAE Benzene before anything ships.
Bump test the monitor after any repair or consumable change, and calibrate per the manufacturer's instructions and your site procedure.
PK Safety is a Factory Authorized RAE Systems Service Center with in-house technicians, so this benzene tube cartridges ships from the shop that services your monitor. Questions on fit or quantity? Call 800.829.9580.
Part Number:
M01-0312-000
Frequently Asked Questions
How does the MultiRAE Benzene cartridge work?
The cartridge holds a chemical bed that delays non-benzene VOCs so the PID reads the benzene fraction of the sample. Follow the manufacturer's draw and timing instructions exactly, since the separation depends on time.
When do I replace the cartridge?
Each cartridge is single-use. Load a fresh one for every benzene sample and dispose of used cartridges per your site procedure.
Is M01-0312-000 compatible with my MultiRAE?
Yes, M01-0312-000 is the cartridge for the MultiRAE Benzene configuration. If your MultiRAE is not configured for benzene sampling, call us with the serial number and we will confirm fit.
Do I need to recalibrate after installing a cartridge?
Loading a cartridge does not change calibration. Follow your site procedure for bump test and calibration of the MultiRAE PID channel to isobutylene before benzene sampling, per the manufacturer's instructions.
Related Searches
RAE Systems, Gas Detection, Gas Monitor Parts, Gas Detector Accessories
Read more
Description
Note: This is a "Special Order" product that cannot be exchanged and is non-returnable.
These benzene separation tube cartridges are a consumable used with the RAE Systems MultiRAE Benzene (the benzene-sampling MultiRAE configuration built on the MultiRAE platform). M01-0312-000 is a cartridge pack that drops into the MultiRAE Benzene inlet and separates benzene from other VOCs during a sample draw, so the PID channel reports a benzene reading instead of a total-VOC number.
Fit and Specifications
- Benzene separation tube cartridges, part number M01-0312-000
- Cartridge format designed for the MultiRAE Benzene inlet
- Separates benzene from other VOCs during the draw
- Single-use; load one cartridge per sample run
- Treat as a Special Order (see note on this page)
Compatibility and Ordering
Match the part number (M01-0312-000) to the part you are replacing, and confirm your monitor model before you order. Buyers of this benzene tube cartridges already own MultiRAE, so the fastest check is the model label on the back of the unit. If the label is worn or the unit is an older or modified configuration, call us with the serial number and we will verify fit against the MultiRAE Benzene before anything ships.
Bump test the monitor after any repair or consumable change, and calibrate per the manufacturer's instructions and your site procedure.
PK Safety is a Factory Authorized RAE Systems Service Center with in-house technicians, so this benzene tube cartridges ships from the shop that services your monitor. Questions on fit or quantity? Call 800.829.9580.
Part Number:
M01-0312-000
Frequently Asked Questions
How does the MultiRAE Benzene cartridge work?
The cartridge holds a chemical bed that delays non-benzene VOCs so the PID reads the benzene fraction of the sample. Follow the manufacturer's draw and timing instructions exactly, since the separation depends on time.
When do I replace the cartridge?
Each cartridge is single-use. Load a fresh one for every benzene sample and dispose of used cartridges per your site procedure.
Is M01-0312-000 compatible with my MultiRAE?
Yes, M01-0312-000 is the cartridge for the MultiRAE Benzene configuration. If your MultiRAE is not configured for benzene sampling, call us with the serial number and we will confirm fit.
Do I need to recalibrate after installing a cartridge?
Loading a cartridge does not change calibration. Follow your site procedure for bump test and calibration of the MultiRAE PID channel to isobutylene before benzene sampling, per the manufacturer's instructions.
Related Searches
RAE Systems, Gas Detection, Gas Monitor Parts, Gas Detector Accessories
Note: This is a "Special Order" product that cannot be exchanged and is non-returnable.
These benzene separation tube cartridges are a consumable used with the RAE Systems MultiRAE Benzene (the benzene-sampling MultiRAE configuration built on the MultiRAE platform). M01-0312-000 is a cartridge pack that drops into the MultiRAE Benzene inlet and separates benzene from other VOCs during a sample draw, so the PID channel reports a benzene reading instead of a total-VOC number.
Fit and Specifications
- Benzene separation tube cartridges, part number M01-0312-000
- Cartridge format designed for the MultiRAE Benzene inlet
- Separates benzene from other VOCs during the draw
- Single-use; load one cartridge per sample run
- Treat as a Special Order (see note on this page)
Compatibility and Ordering
Match the part number (M01-0312-000) to the part you are replacing, and confirm your monitor model before you order. Buyers of this benzene tube cartridges already own MultiRAE, so the fastest check is the model label on the back of the unit. If the label is worn or the unit is an older or modified configuration, call us with the serial number and we will verify fit against the MultiRAE Benzene before anything ships.
Bump test the monitor after any repair or consumable change, and calibrate per the manufacturer's instructions and your site procedure.
PK Safety is a Factory Authorized RAE Systems Service Center with in-house technicians, so this benzene tube cartridges ships from the shop that services your monitor. Questions on fit or quantity? Call 800.829.9580.
Part Number:
M01-0312-000
Frequently Asked Questions
How does the MultiRAE Benzene cartridge work?
The cartridge holds a chemical bed that delays non-benzene VOCs so the PID reads the benzene fraction of the sample. Follow the manufacturer's draw and timing instructions exactly, since the separation depends on time.
When do I replace the cartridge?
Each cartridge is single-use. Load a fresh one for every benzene sample and dispose of used cartridges per your site procedure.
Is M01-0312-000 compatible with my MultiRAE?
Yes, M01-0312-000 is the cartridge for the MultiRAE Benzene configuration. If your MultiRAE is not configured for benzene sampling, call us with the serial number and we will confirm fit.
Do I need to recalibrate after installing a cartridge?
Loading a cartridge does not change calibration. Follow your site procedure for bump test and calibration of the MultiRAE PID channel to isobutylene before benzene sampling, per the manufacturer's instructions.
Related Searches
RAE Systems, Gas Detection, Gas Monitor Parts, Gas Detector Accessories
Specifications
Specifications
-
MPN
-
Product Weight (lbs.)
-
Height (in.)
-
Length (in.)
-
Width (in.)
-
Country of Origin
Reviews
Reviews
Keep your team protected & compliant!
- Expert guidance tailored to your specific needs
- Access responsive customer support when you need it
- Enjoy fast shipping directly to your location
- Benefit from extensive industry knowledge—75+ years of experience
- In-house gas detection calibration & repair services available
