RAE Benzene Separation Tubes 012-3022-010 (10/Box)
Description
Note: This is a "Special Order" product that cannot be exchanged and is non-returnable.
These benzene separation tubes are a consumable used with the RAE Systems UltraRAE 3000 benzene-specific PID. 012-3022-010 is a box of ten. Each tube isolates benzene from other volatile organics in a drawn sample so the PID reports a benzene reading rather than a total-VOC number, which matters any time your readings have to stand up as benzene-specific.
Fit and Specifications
- Benzene separation tubes, part number 012-3022-010
- 10 tubes per box
- For benzene-specific sampling with the RAE Systems UltraRAE 3000
- Single-use consumable; one tube per sample run
- Treat as a Special Order (see note on this page)
Compatibility and Ordering
Match the part number (012-3022-010) to the part you are replacing, and confirm your monitor model before you order. Buyers of this benzene separation tubes already own UltraRAE 3000 benzene-specific PID monitor, so the fastest check is the model label on the back of the unit. If the label is worn or the unit is an older or modified configuration, call us with the serial number and we will verify fit against the UltraRAE 3000 benzene-specific PID monitor before anything ships.
Bump test the monitor after any repair or consumable change, and calibrate per the manufacturer's instructions and your site procedure.
PK Safety is a Factory Authorized RAE Systems Service Center with in-house technicians, so this benzene separation tubes ships from the shop that services your monitor. Questions on fit or quantity? Call 800.829.9580.
Part Number:
012-3022-010
Frequently Asked Questions
How does a benzene separation tube work?
The tube chemically delays non-benzene VOCs long enough that the PID reads only the benzene fraction of the sample. Follow the manufacturer's draw and read times exactly, since the separation is time-based.
How many tubes are in the box?
Ten. Each tube is a single-use item, so plan your box count against the number of benzene checks on the job.
Is 012-3022-010 compatible with my UltraRAE 3000?
Yes, these are the RAE Systems benzene separation tubes for the UltraRAE 3000. Call us with your serial number if you have a non-standard configuration and we will confirm.
Do I need to recalibrate the monitor after using a tube?
No calibration change is required for use of the tube itself. Follow your site procedure for bump test and calibration of the UltraRAE 3000 to isobutylene before benzene sampling, per the manufacturer's instructions.
Related Searches
RAE Systems, Gas Detection, Gas Monitor Parts, Gas Detector Accessories
Read more
Description
Note: This is a "Special Order" product that cannot be exchanged and is non-returnable.
These benzene separation tubes are a consumable used with the RAE Systems UltraRAE 3000 benzene-specific PID. 012-3022-010 is a box of ten. Each tube isolates benzene from other volatile organics in a drawn sample so the PID reports a benzene reading rather than a total-VOC number, which matters any time your readings have to stand up as benzene-specific.
Fit and Specifications
- Benzene separation tubes, part number 012-3022-010
- 10 tubes per box
- For benzene-specific sampling with the RAE Systems UltraRAE 3000
- Single-use consumable; one tube per sample run
- Treat as a Special Order (see note on this page)
Compatibility and Ordering
Match the part number (012-3022-010) to the part you are replacing, and confirm your monitor model before you order. Buyers of this benzene separation tubes already own UltraRAE 3000 benzene-specific PID monitor, so the fastest check is the model label on the back of the unit. If the label is worn or the unit is an older or modified configuration, call us with the serial number and we will verify fit against the UltraRAE 3000 benzene-specific PID monitor before anything ships.
Bump test the monitor after any repair or consumable change, and calibrate per the manufacturer's instructions and your site procedure.
PK Safety is a Factory Authorized RAE Systems Service Center with in-house technicians, so this benzene separation tubes ships from the shop that services your monitor. Questions on fit or quantity? Call 800.829.9580.
Part Number:
012-3022-010
Frequently Asked Questions
How does a benzene separation tube work?
The tube chemically delays non-benzene VOCs long enough that the PID reads only the benzene fraction of the sample. Follow the manufacturer's draw and read times exactly, since the separation is time-based.
How many tubes are in the box?
Ten. Each tube is a single-use item, so plan your box count against the number of benzene checks on the job.
Is 012-3022-010 compatible with my UltraRAE 3000?
Yes, these are the RAE Systems benzene separation tubes for the UltraRAE 3000. Call us with your serial number if you have a non-standard configuration and we will confirm.
Do I need to recalibrate the monitor after using a tube?
No calibration change is required for use of the tube itself. Follow your site procedure for bump test and calibration of the UltraRAE 3000 to isobutylene before benzene sampling, per the manufacturer's instructions.
Related Searches
RAE Systems, Gas Detection, Gas Monitor Parts, Gas Detector Accessories
Note: This is a "Special Order" product that cannot be exchanged and is non-returnable.
These benzene separation tubes are a consumable used with the RAE Systems UltraRAE 3000 benzene-specific PID. 012-3022-010 is a box of ten. Each tube isolates benzene from other volatile organics in a drawn sample so the PID reports a benzene reading rather than a total-VOC number, which matters any time your readings have to stand up as benzene-specific.
Fit and Specifications
- Benzene separation tubes, part number 012-3022-010
- 10 tubes per box
- For benzene-specific sampling with the RAE Systems UltraRAE 3000
- Single-use consumable; one tube per sample run
- Treat as a Special Order (see note on this page)
Compatibility and Ordering
Match the part number (012-3022-010) to the part you are replacing, and confirm your monitor model before you order. Buyers of this benzene separation tubes already own UltraRAE 3000 benzene-specific PID monitor, so the fastest check is the model label on the back of the unit. If the label is worn or the unit is an older or modified configuration, call us with the serial number and we will verify fit against the UltraRAE 3000 benzene-specific PID monitor before anything ships.
Bump test the monitor after any repair or consumable change, and calibrate per the manufacturer's instructions and your site procedure.
PK Safety is a Factory Authorized RAE Systems Service Center with in-house technicians, so this benzene separation tubes ships from the shop that services your monitor. Questions on fit or quantity? Call 800.829.9580.
Part Number:
012-3022-010
Frequently Asked Questions
How does a benzene separation tube work?
The tube chemically delays non-benzene VOCs long enough that the PID reads only the benzene fraction of the sample. Follow the manufacturer's draw and read times exactly, since the separation is time-based.
How many tubes are in the box?
Ten. Each tube is a single-use item, so plan your box count against the number of benzene checks on the job.
Is 012-3022-010 compatible with my UltraRAE 3000?
Yes, these are the RAE Systems benzene separation tubes for the UltraRAE 3000. Call us with your serial number if you have a non-standard configuration and we will confirm.
Do I need to recalibrate the monitor after using a tube?
No calibration change is required for use of the tube itself. Follow your site procedure for bump test and calibration of the UltraRAE 3000 to isobutylene before benzene sampling, per the manufacturer's instructions.
Related Searches
RAE Systems, Gas Detection, Gas Monitor Parts, Gas Detector Accessories
Specifications
Specifications
-
Product Weight (lbs.)
-
Height (in.)
-
Length (in.)
-
Width (in.)
-
Country of Origin
Reviews
Reviews
Keep your team protected & compliant!
- Expert guidance tailored to your specific needs
- Access responsive customer support when you need it
- Enjoy fast shipping directly to your location
- Benefit from extensive industry knowledge—75+ years of experience
- In-house gas detection calibration & repair services available
