BW Manual Aspirator Pump Kit with Probe GA-AS02
Description
This manual aspirator pump kit with probe adds hand-pumped sampling to BW diffusion monitors such as the BW GasAlert MicroClip XL. A diffusion monitor only reads the air around it. GA-AS02 lets a worker squeeze the bulb to pull a sample from a tank, manhole, or other space before entry, without lowering or reaching in with the monitor itself.
Fit and Specifications
- Manual aspirator pump kit with probe, part number GA-AS02
- Hand-operated; no batteries required
- Used to draw remote samples to a diffusion-style monitor
- Consumable parts, such as filters, are sold separately
Compatibility and Ordering
Match the part number (GA-AS02) to the part you are replacing, and confirm your monitor model before you order. Buyers of this aspirator kit already own BW GasAlert MicroClip XL, so the fastest check is the model label on the back of the unit. If the label is worn or the unit is an older or modified configuration, call us with the serial number and we will verify fit against the GasAlert MicroClip XL before anything ships.
Bump test the monitor after any repair or consumable change, and calibrate per the manufacturer's instructions and your site procedure.
PK Safety is a Factory Authorized Service Center for BW Technologies by Honeywell with in-house technicians, so this aspirator kit ships from the shop that services your monitor. Questions on fit or quantity? Call 800.829.9580.
Part Number:
GA-AS02
Frequently Asked Questions
Will GA-AS02 work with my MicroClip XL?
It is intended for BW diffusion-style monitors. Call us with your model and we will confirm the adapter or probe arrangement.
Why use an aspirator instead of just lowering the monitor?
It lets you test a space from outside it. Sample at several levels, and allow time for the sample to reach the sensors so readings stabilize before you read them.
Is the Max XT II compatible?
The Max XT II has its own internal pump and does not need a manual aspirator. This kit is for monitors without a pump.
Do I still need to bump test with the aspirator attached?
Yes. Follow your site procedure and the manufacturer's instructions for testing the monitor and the sampling setup together.
Related Searches
BW Technologies by Honeywell, Gas Detection, Gas Detector Accessories
Read more
Description
This manual aspirator pump kit with probe adds hand-pumped sampling to BW diffusion monitors such as the BW GasAlert MicroClip XL. A diffusion monitor only reads the air around it. GA-AS02 lets a worker squeeze the bulb to pull a sample from a tank, manhole, or other space before entry, without lowering or reaching in with the monitor itself.
Fit and Specifications
- Manual aspirator pump kit with probe, part number GA-AS02
- Hand-operated; no batteries required
- Used to draw remote samples to a diffusion-style monitor
- Consumable parts, such as filters, are sold separately
Compatibility and Ordering
Match the part number (GA-AS02) to the part you are replacing, and confirm your monitor model before you order. Buyers of this aspirator kit already own BW GasAlert MicroClip XL, so the fastest check is the model label on the back of the unit. If the label is worn or the unit is an older or modified configuration, call us with the serial number and we will verify fit against the GasAlert MicroClip XL before anything ships.
Bump test the monitor after any repair or consumable change, and calibrate per the manufacturer's instructions and your site procedure.
PK Safety is a Factory Authorized Service Center for BW Technologies by Honeywell with in-house technicians, so this aspirator kit ships from the shop that services your monitor. Questions on fit or quantity? Call 800.829.9580.
Part Number:
GA-AS02
Frequently Asked Questions
Will GA-AS02 work with my MicroClip XL?
It is intended for BW diffusion-style monitors. Call us with your model and we will confirm the adapter or probe arrangement.
Why use an aspirator instead of just lowering the monitor?
It lets you test a space from outside it. Sample at several levels, and allow time for the sample to reach the sensors so readings stabilize before you read them.
Is the Max XT II compatible?
The Max XT II has its own internal pump and does not need a manual aspirator. This kit is for monitors without a pump.
Do I still need to bump test with the aspirator attached?
Yes. Follow your site procedure and the manufacturer's instructions for testing the monitor and the sampling setup together.
Related Searches
BW Technologies by Honeywell, Gas Detection, Gas Detector Accessories
This manual aspirator pump kit with probe adds hand-pumped sampling to BW diffusion monitors such as the BW GasAlert MicroClip XL. A diffusion monitor only reads the air around it. GA-AS02 lets a worker squeeze the bulb to pull a sample from a tank, manhole, or other space before entry, without lowering or reaching in with the monitor itself.
Fit and Specifications
- Manual aspirator pump kit with probe, part number GA-AS02
- Hand-operated; no batteries required
- Used to draw remote samples to a diffusion-style monitor
- Consumable parts, such as filters, are sold separately
Compatibility and Ordering
Match the part number (GA-AS02) to the part you are replacing, and confirm your monitor model before you order. Buyers of this aspirator kit already own BW GasAlert MicroClip XL, so the fastest check is the model label on the back of the unit. If the label is worn or the unit is an older or modified configuration, call us with the serial number and we will verify fit against the GasAlert MicroClip XL before anything ships.
Bump test the monitor after any repair or consumable change, and calibrate per the manufacturer's instructions and your site procedure.
PK Safety is a Factory Authorized Service Center for BW Technologies by Honeywell with in-house technicians, so this aspirator kit ships from the shop that services your monitor. Questions on fit or quantity? Call 800.829.9580.
Part Number:
GA-AS02
Frequently Asked Questions
Will GA-AS02 work with my MicroClip XL?
It is intended for BW diffusion-style monitors. Call us with your model and we will confirm the adapter or probe arrangement.
Why use an aspirator instead of just lowering the monitor?
It lets you test a space from outside it. Sample at several levels, and allow time for the sample to reach the sensors so readings stabilize before you read them.
Is the Max XT II compatible?
The Max XT II has its own internal pump and does not need a manual aspirator. This kit is for monitors without a pump.
Do I still need to bump test with the aspirator attached?
Yes. Follow your site procedure and the manufacturer's instructions for testing the monitor and the sampling setup together.
Related Searches
BW Technologies by Honeywell, Gas Detection, Gas Detector Accessories
Specifications
Specifications
-
Product Weight (lbs.)
-
Height (in.)
-
Length (in.)
-
Width (in.)
-
Country of Origin
Reviews
Reviews
Keep your team protected & compliant!
- Expert guidance tailored to your specific needs
- Access responsive customer support when you need it
- Enjoy fast shipping directly to your location
- Benefit from extensive industry knowledge—75+ years of experience
- In-house gas detection calibration & repair services available
