BW Honeywell 100 ppm Isobutylene Calibration Gas CG2-IB-100-34AL
Description
The BW Honeywell CG2-IB-100-34AL 100 ppm Isobutylene Calibration Gas is a 34-liter cylinder used for bump testing and calibrating PID (photoionization detector) sensors in BW GasAlert Micro 5 PID gas monitors. Isobutylene is the standard surrogate calibration gas for PID sensors monitoring volatile organic compounds (VOCs). Accurate PID calibration is critical in environments with solvent, hydrocarbon, or VOC exposure.
Compatible with:
- BW GasAlert Micro 5 PID Monitor
FAQs: How Often Do I Need To Calibrate My Gas Monitor?
Regulatory Note: OSHA 29 CFR 1910.1000 Table Z-1 lists PELs for numerous VOCs detectable by PID. Employers in industries with VOC exposure risk should maintain calibrated PID instruments as part of their industrial hygiene program.
Note: This item ships via UPS Ground due to HazMat restrictions and is not available for expedited shipping. Calibration gas is not returnable. Please check your selection carefully before ordering.
PK Safety services BW Technologies by Honeywell gas monitors in-house with factory-trained technicians. For help selecting the right gear or to schedule calibration and repair, call 800.829.9580 or contact us online.
Part Number:
CG2-IB-100-34AL
Related Searches
Bw Technologies By Honeywell, Calibration Gas, Gas Detection
Frequently Asked Questions
Which BW gas monitor requires the CG2-IB-100-34AL isobutylene calibration gas?
The CG2-IB-100-34AL is specifically used for calibrating the PID (photoionization detector) sensor in the BW GasAlert Micro 5 PID Monitor. Isobutylene is the standard surrogate calibration gas for PID sensors. If your GasAlert Micro 5 does not have a PID sensor, you do not need this product.
Why is isobutylene used to calibrate PID sensors?
Isobutylene is chemically stable, well-characterized, and produces a reliable, repeatable response on PID sensors. It serves as the calibration reference gas for instruments designed to detect volatile organic compounds (VOCs). Calibrating the PID sensor with 100 ppm isobutylene ensures accurate relative response to other VOCs your monitor may encounter in the field.
Can the CG2-IB-100-34AL be shipped via air freight or expedited service?
No. Compressed calibration gas is classified as HazMat and must ship via UPS Ground only. Expedited and air freight are not available. Calibration gas is also non-returnable. Plan your orders 5–7 business days ahead of need. Call PK Safety at 800.829.9580 if you need help scheduling supply.
What is the shelf life of the CG2-IB-100-34AL calibration gas?
The CG2-IB-100-34AL has a shelf life of approximately two years from the fill date printed on the cylinder label. Do not use expired calibration gas — degraded gas concentrations can produce inaccurate calibration readings and invalidate compliance records. Store cylinders upright in a cool, dry area below 120°F, away from heat sources and direct sunlight.
What regulator do I need for the CG2-IB-100-34AL?
Use a demand flow regulator or 0.5 LPM fixed flow regulator compatible with the CG2-IB-100-34AL cylinder valve. For GasAlert Micro 5 PID calibration, consult the BW monitor user manual for the recommended flow rate. PK Safety carries compatible regulators — call 800.829.9580 and our gas detection specialists will match the right regulator to your cylinder and monitor.
Can PK Safety help me select the right calibration gas for my BW PID monitor?
Yes. PK Safety is a BW Technologies by Honeywell Factory Authorized Service Center and authorized dealer. Our gas detection specialists can confirm the correct calibration gas part number for your specific GasAlert Micro 5 configuration. Call 800.829.9580 or chat with a specialist to verify your selection before ordering.
Read more
Description
The BW Honeywell CG2-IB-100-34AL 100 ppm Isobutylene Calibration Gas is a 34-liter cylinder used for bump testing and calibrating PID (photoionization detector) sensors in BW GasAlert Micro 5 PID gas monitors. Isobutylene is the standard surrogate calibration gas for PID sensors monitoring volatile organic compounds (VOCs). Accurate PID calibration is critical in environments with solvent, hydrocarbon, or VOC exposure.
Compatible with:
- BW GasAlert Micro 5 PID Monitor
FAQs: How Often Do I Need To Calibrate My Gas Monitor?
Regulatory Note: OSHA 29 CFR 1910.1000 Table Z-1 lists PELs for numerous VOCs detectable by PID. Employers in industries with VOC exposure risk should maintain calibrated PID instruments as part of their industrial hygiene program.
Note: This item ships via UPS Ground due to HazMat restrictions and is not available for expedited shipping. Calibration gas is not returnable. Please check your selection carefully before ordering.
PK Safety services BW Technologies by Honeywell gas monitors in-house with factory-trained technicians. For help selecting the right gear or to schedule calibration and repair, call 800.829.9580 or contact us online.
Part Number:
CG2-IB-100-34AL
Related Searches
Bw Technologies By Honeywell, Calibration Gas, Gas Detection
Frequently Asked Questions
Which BW gas monitor requires the CG2-IB-100-34AL isobutylene calibration gas?
The CG2-IB-100-34AL is specifically used for calibrating the PID (photoionization detector) sensor in the BW GasAlert Micro 5 PID Monitor. Isobutylene is the standard surrogate calibration gas for PID sensors. If your GasAlert Micro 5 does not have a PID sensor, you do not need this product.
Why is isobutylene used to calibrate PID sensors?
Isobutylene is chemically stable, well-characterized, and produces a reliable, repeatable response on PID sensors. It serves as the calibration reference gas for instruments designed to detect volatile organic compounds (VOCs). Calibrating the PID sensor with 100 ppm isobutylene ensures accurate relative response to other VOCs your monitor may encounter in the field.
Can the CG2-IB-100-34AL be shipped via air freight or expedited service?
No. Compressed calibration gas is classified as HazMat and must ship via UPS Ground only. Expedited and air freight are not available. Calibration gas is also non-returnable. Plan your orders 5–7 business days ahead of need. Call PK Safety at 800.829.9580 if you need help scheduling supply.
What is the shelf life of the CG2-IB-100-34AL calibration gas?
The CG2-IB-100-34AL has a shelf life of approximately two years from the fill date printed on the cylinder label. Do not use expired calibration gas — degraded gas concentrations can produce inaccurate calibration readings and invalidate compliance records. Store cylinders upright in a cool, dry area below 120°F, away from heat sources and direct sunlight.
What regulator do I need for the CG2-IB-100-34AL?
Use a demand flow regulator or 0.5 LPM fixed flow regulator compatible with the CG2-IB-100-34AL cylinder valve. For GasAlert Micro 5 PID calibration, consult the BW monitor user manual for the recommended flow rate. PK Safety carries compatible regulators — call 800.829.9580 and our gas detection specialists will match the right regulator to your cylinder and monitor.
Can PK Safety help me select the right calibration gas for my BW PID monitor?
Yes. PK Safety is a BW Technologies by Honeywell Factory Authorized Service Center and authorized dealer. Our gas detection specialists can confirm the correct calibration gas part number for your specific GasAlert Micro 5 configuration. Call 800.829.9580 or chat with a specialist to verify your selection before ordering.
The BW Honeywell CG2-IB-100-34AL 100 ppm Isobutylene Calibration Gas is a 34-liter cylinder used for bump testing and calibrating PID (photoionization detector) sensors in BW GasAlert Micro 5 PID gas monitors. Isobutylene is the standard surrogate calibration gas for PID sensors monitoring volatile organic compounds (VOCs). Accurate PID calibration is critical in environments with solvent, hydrocarbon, or VOC exposure.
Compatible with:
- BW GasAlert Micro 5 PID Monitor
FAQs: How Often Do I Need To Calibrate My Gas Monitor?
Regulatory Note: OSHA 29 CFR 1910.1000 Table Z-1 lists PELs for numerous VOCs detectable by PID. Employers in industries with VOC exposure risk should maintain calibrated PID instruments as part of their industrial hygiene program.
Note: This item ships via UPS Ground due to HazMat restrictions and is not available for expedited shipping. Calibration gas is not returnable. Please check your selection carefully before ordering.
PK Safety services BW Technologies by Honeywell gas monitors in-house with factory-trained technicians. For help selecting the right gear or to schedule calibration and repair, call 800.829.9580 or contact us online.
Part Number:
CG2-IB-100-34AL
Related Searches
Bw Technologies By Honeywell, Calibration Gas, Gas Detection
Frequently Asked Questions
Which BW gas monitor requires the CG2-IB-100-34AL isobutylene calibration gas?
The CG2-IB-100-34AL is specifically used for calibrating the PID (photoionization detector) sensor in the BW GasAlert Micro 5 PID Monitor. Isobutylene is the standard surrogate calibration gas for PID sensors. If your GasAlert Micro 5 does not have a PID sensor, you do not need this product.
Why is isobutylene used to calibrate PID sensors?
Isobutylene is chemically stable, well-characterized, and produces a reliable, repeatable response on PID sensors. It serves as the calibration reference gas for instruments designed to detect volatile organic compounds (VOCs). Calibrating the PID sensor with 100 ppm isobutylene ensures accurate relative response to other VOCs your monitor may encounter in the field.
Can the CG2-IB-100-34AL be shipped via air freight or expedited service?
No. Compressed calibration gas is classified as HazMat and must ship via UPS Ground only. Expedited and air freight are not available. Calibration gas is also non-returnable. Plan your orders 5–7 business days ahead of need. Call PK Safety at 800.829.9580 if you need help scheduling supply.
What is the shelf life of the CG2-IB-100-34AL calibration gas?
The CG2-IB-100-34AL has a shelf life of approximately two years from the fill date printed on the cylinder label. Do not use expired calibration gas — degraded gas concentrations can produce inaccurate calibration readings and invalidate compliance records. Store cylinders upright in a cool, dry area below 120°F, away from heat sources and direct sunlight.
What regulator do I need for the CG2-IB-100-34AL?
Use a demand flow regulator or 0.5 LPM fixed flow regulator compatible with the CG2-IB-100-34AL cylinder valve. For GasAlert Micro 5 PID calibration, consult the BW monitor user manual for the recommended flow rate. PK Safety carries compatible regulators — call 800.829.9580 and our gas detection specialists will match the right regulator to your cylinder and monitor.
Can PK Safety help me select the right calibration gas for my BW PID monitor?
Yes. PK Safety is a BW Technologies by Honeywell Factory Authorized Service Center and authorized dealer. Our gas detection specialists can confirm the correct calibration gas part number for your specific GasAlert Micro 5 configuration. Call 800.829.9580 or chat with a specialist to verify your selection before ordering.
Specifications
Specifications
-
Type
-
Gas Type
-
Product Weight (lbs.)
-
Height (in.)
-
Length (in.)
-
Width (in.)
-
Country of Origin
Reviews
Reviews
Keep your team protected & compliant!
- Expert guidance tailored to your specific needs
- Access responsive customer support when you need it
- Enjoy fast shipping directly to your location
- Benefit from extensive industry knowledge—75+ years of experience
- In-house gas detection calibration & repair services available
