BW Clip 2 Year SO2 5-10 Single Gas Detector BWC2-S
Description
BW Technologies 2-Year BW Clip for SO2 (BWC2-S) is a maintenance-free, single gas detector with default alarm setpoints at 5–10 ppm for sulfur dioxide. BW Clip has everything you need — just turn on the device and it runs continuously — no need for calibration, sensor replacement, battery replacement or battery charging. That means great reliability and no downtime.
With the 2-year BW Clip for SO2, you can use the BW Clip Hibernation Case when you're not using it for a week or more and extend its life by that period of time, up to 12 months.
Compatible with both the MicroDock II and the IntelliDoX instrument management systems, the BW Clip is engineered to the highest standards of quality and reliability, keeping you safe and compliant.
Use the hands-free Hard Hat Clip carrying accessory GA-HC-1 with any of the BW single gas monitors.
Custom calibrations are available direct from PK Safety. If you need custom alarms for your BW Clip, we have technicians that can customize these settings to your exact requirements without delaying your order.
BW Clip Standard Features:
- Maintenance-free: no sensor or battery changes necessary
- Compact, lightweight design with one-button operation
- Designed for a range of harsh environments and extreme temperatures
- Automated self-test of battery, sensor and electronics
- Wide-angle flash, which alerts simultaneously with audible and vibrating alarm
- Automatic logging of the 35 most recent gas events and bump test results
- IP 66/67 — can be submerged up to 1 meter
- Default Alarm Setpoints: 5–10 ppm
- Alarm Setpoints Range: 2–20 ppm
- Measuring Range: 0–100 ppm
- Affordable, with low cost of ownership
Unit Includes:
- Detector complete with specified sensor, stainless steel alligator clip and concussion-proof housing
- Calibration/test cap and hose
- Manual
Configurable Options with IntelliDoX Management System:
- Configuration of high and low alarm set points before the device is activated
- Adjustment of alarm set points and other parameters as needed throughout the lifespan
- Non-compliance chirp indicator
- Configuration without activation
- Option to enable the noncompliance indicator, which flashes red when a bump test is due or a gas event occurs
- Option to display gas reading during alarm
- User settable bump test reminder
- 7–8 sec bump test with no more than 1 minute purge
- Option to display the Real Time Clock
Advanced Technology for Safety Compliance and Productivity:
- Unique dual reservoir sensor design dramatically improves instrument performance, response time, and longevity compared to traditional electrochemical sensors
- Reflex Technology advanced automated self-test function routinely checks the operating condition of the sensor to increase safety, uptime, and overall worker confidence
BW Clip Specifications:
- Weight: 0.6 lbs.
- Temperature: -40 to 122°F
- Humidity: 5–95% RH (non-condensing)
- Alarms: Visual, vibrating, and audible
- Typical Battery Life: Two years
Regulatory Note: The OSHA PEL for sulfur dioxide is 5 ppm (29 CFR 1910.1000, Table Z-1). The BWC2-S default low alarm of 5 ppm corresponds to the OSHA PEL, making it appropriate for operations where the regulatory threshold is the primary alarm trigger. Employers must also comply with 29 CFR 1910.146 for confined space atmospheric testing and monitoring.
Please Note: MM and DD denote the number of months and days left before the gas monitor expires. This monitor does not have a digital display of the gas concentration. Once activated, these units cannot be shut down and will continue to run for their two-year life span, prohibiting these items from being shipped because the alarm may be activated during transit. Additionally, these items are unable to be resold after activation.
Part Number:
BWC2-S 2 Year SO2 5-10
PK Safety services BW Technologies by Honeywell gas monitors in-house with factory-trained technicians. For help selecting the right part or to schedule calibration and repair, call 800.829.9580 or contact us online.
Related Searches
Bestselling Products, Bw Technologies By Honeywell, Gas Detection, Limited Time Offers, Portable Gas Monitors And Detectors, Single-Gas Monitors
Frequently Asked Questions
What is the SO2 OSHA PEL and how does the BWC2-S align with it?
The OSHA PEL for sulfur dioxide is 5 ppm (8-hour TWA, 29 CFR 1910.1000, Table Z-1). The BWC2-S default low alarm at 5 ppm aligns directly with the OSHA PEL, alerting workers immediately when the regulatory threshold is reached. The high alarm at 10 ppm provides a secondary IDLH-approach warning. Contact PK Safety at 800.829.9580 if you need custom setpoints for your operation.
How does the BWC2-S compare to the BWC2-S24?
The BWC2-S24 has default alarm setpoints of 2 ppm (low) and 4 ppm (high) for earlier warning in environments with stricter SO2 exposure policies. The BWC2-S alarms at 5 ppm (low) and 10 ppm (high), matching the OSHA PEL. Both models share the same maintenance-free 2-year lifespan, IP 66/67 rating, and 0–100 ppm measuring range.
Does the BWC2-S need calibration or sensor replacement?
No. The BWC2-S is maintenance-free for its full two-year lifespan. Reflex Technology automated self-tests continuously verify sensor and battery condition. No calibration, sensor, or battery service is required. A calibration/test cap and hose are included for bump testing to confirm alarm response before each use.
Can I configure alarm setpoints on the BWC2-S?
Yes. Using the BW IntelliDoX DX-CLIP docking station, alarm setpoints can be configured within the range of 2 ppm to 20 ppm. PK Safety's technicians can also pre-configure setpoints before shipment. Call 800.829.9580 or visit our BW Calibration Service page.
Is the BWC2-S compatible with the Hibernation Case?
Yes. The BW Clip Hibernation Case CLIPHB-CASE is compatible with the BWC2-S. Storing the monitor in the hibernation case when idle for a week or more pauses the device clock, extending usable life by up to 12 additional months beyond the two-year standard.
What industries use the BW Clip BWC2-S SO2 monitor?
The BWC2-S SO2 monitor is commonly used in pulp and paper mills, power plants (combustion SO2 emissions), metal smelting and refining, chemical plants, refineries, wastewater treatment, and food processing (refrigeration SO2 leak detection). Its maintenance-free design is especially valued in operations with large worker populations that require regular monitor rotation.
Read more
Description
BW Technologies 2-Year BW Clip for SO2 (BWC2-S) is a maintenance-free, single gas detector with default alarm setpoints at 5–10 ppm for sulfur dioxide. BW Clip has everything you need — just turn on the device and it runs continuously — no need for calibration, sensor replacement, battery replacement or battery charging. That means great reliability and no downtime.
With the 2-year BW Clip for SO2, you can use the BW Clip Hibernation Case when you're not using it for a week or more and extend its life by that period of time, up to 12 months.
Compatible with both the MicroDock II and the IntelliDoX instrument management systems, the BW Clip is engineered to the highest standards of quality and reliability, keeping you safe and compliant.
Use the hands-free Hard Hat Clip carrying accessory GA-HC-1 with any of the BW single gas monitors.
Custom calibrations are available direct from PK Safety. If you need custom alarms for your BW Clip, we have technicians that can customize these settings to your exact requirements without delaying your order.
BW Clip Standard Features:
- Maintenance-free: no sensor or battery changes necessary
- Compact, lightweight design with one-button operation
- Designed for a range of harsh environments and extreme temperatures
- Automated self-test of battery, sensor and electronics
- Wide-angle flash, which alerts simultaneously with audible and vibrating alarm
- Automatic logging of the 35 most recent gas events and bump test results
- IP 66/67 — can be submerged up to 1 meter
- Default Alarm Setpoints: 5–10 ppm
- Alarm Setpoints Range: 2–20 ppm
- Measuring Range: 0–100 ppm
- Affordable, with low cost of ownership
Unit Includes:
- Detector complete with specified sensor, stainless steel alligator clip and concussion-proof housing
- Calibration/test cap and hose
- Manual
Configurable Options with IntelliDoX Management System:
- Configuration of high and low alarm set points before the device is activated
- Adjustment of alarm set points and other parameters as needed throughout the lifespan
- Non-compliance chirp indicator
- Configuration without activation
- Option to enable the noncompliance indicator, which flashes red when a bump test is due or a gas event occurs
- Option to display gas reading during alarm
- User settable bump test reminder
- 7–8 sec bump test with no more than 1 minute purge
- Option to display the Real Time Clock
Advanced Technology for Safety Compliance and Productivity:
- Unique dual reservoir sensor design dramatically improves instrument performance, response time, and longevity compared to traditional electrochemical sensors
- Reflex Technology advanced automated self-test function routinely checks the operating condition of the sensor to increase safety, uptime, and overall worker confidence
BW Clip Specifications:
- Weight: 0.6 lbs.
- Temperature: -40 to 122°F
- Humidity: 5–95% RH (non-condensing)
- Alarms: Visual, vibrating, and audible
- Typical Battery Life: Two years
Regulatory Note: The OSHA PEL for sulfur dioxide is 5 ppm (29 CFR 1910.1000, Table Z-1). The BWC2-S default low alarm of 5 ppm corresponds to the OSHA PEL, making it appropriate for operations where the regulatory threshold is the primary alarm trigger. Employers must also comply with 29 CFR 1910.146 for confined space atmospheric testing and monitoring.
Please Note: MM and DD denote the number of months and days left before the gas monitor expires. This monitor does not have a digital display of the gas concentration. Once activated, these units cannot be shut down and will continue to run for their two-year life span, prohibiting these items from being shipped because the alarm may be activated during transit. Additionally, these items are unable to be resold after activation.
Part Number:
BWC2-S 2 Year SO2 5-10
PK Safety services BW Technologies by Honeywell gas monitors in-house with factory-trained technicians. For help selecting the right part or to schedule calibration and repair, call 800.829.9580 or contact us online.
Related Searches
Bestselling Products, Bw Technologies By Honeywell, Gas Detection, Limited Time Offers, Portable Gas Monitors And Detectors, Single-Gas Monitors
Frequently Asked Questions
What is the SO2 OSHA PEL and how does the BWC2-S align with it?
The OSHA PEL for sulfur dioxide is 5 ppm (8-hour TWA, 29 CFR 1910.1000, Table Z-1). The BWC2-S default low alarm at 5 ppm aligns directly with the OSHA PEL, alerting workers immediately when the regulatory threshold is reached. The high alarm at 10 ppm provides a secondary IDLH-approach warning. Contact PK Safety at 800.829.9580 if you need custom setpoints for your operation.
How does the BWC2-S compare to the BWC2-S24?
The BWC2-S24 has default alarm setpoints of 2 ppm (low) and 4 ppm (high) for earlier warning in environments with stricter SO2 exposure policies. The BWC2-S alarms at 5 ppm (low) and 10 ppm (high), matching the OSHA PEL. Both models share the same maintenance-free 2-year lifespan, IP 66/67 rating, and 0–100 ppm measuring range.
Does the BWC2-S need calibration or sensor replacement?
No. The BWC2-S is maintenance-free for its full two-year lifespan. Reflex Technology automated self-tests continuously verify sensor and battery condition. No calibration, sensor, or battery service is required. A calibration/test cap and hose are included for bump testing to confirm alarm response before each use.
Can I configure alarm setpoints on the BWC2-S?
Yes. Using the BW IntelliDoX DX-CLIP docking station, alarm setpoints can be configured within the range of 2 ppm to 20 ppm. PK Safety's technicians can also pre-configure setpoints before shipment. Call 800.829.9580 or visit our BW Calibration Service page.
Is the BWC2-S compatible with the Hibernation Case?
Yes. The BW Clip Hibernation Case CLIPHB-CASE is compatible with the BWC2-S. Storing the monitor in the hibernation case when idle for a week or more pauses the device clock, extending usable life by up to 12 additional months beyond the two-year standard.
What industries use the BW Clip BWC2-S SO2 monitor?
The BWC2-S SO2 monitor is commonly used in pulp and paper mills, power plants (combustion SO2 emissions), metal smelting and refining, chemical plants, refineries, wastewater treatment, and food processing (refrigeration SO2 leak detection). Its maintenance-free design is especially valued in operations with large worker populations that require regular monitor rotation.
BW Technologies 2-Year BW Clip for SO2 (BWC2-S) is a maintenance-free, single gas detector with default alarm setpoints at 5–10 ppm for sulfur dioxide. BW Clip has everything you need — just turn on the device and it runs continuously — no need for calibration, sensor replacement, battery replacement or battery charging. That means great reliability and no downtime.
With the 2-year BW Clip for SO2, you can use the BW Clip Hibernation Case when you're not using it for a week or more and extend its life by that period of time, up to 12 months.
Compatible with both the MicroDock II and the IntelliDoX instrument management systems, the BW Clip is engineered to the highest standards of quality and reliability, keeping you safe and compliant.
Use the hands-free Hard Hat Clip carrying accessory GA-HC-1 with any of the BW single gas monitors.
Custom calibrations are available direct from PK Safety. If you need custom alarms for your BW Clip, we have technicians that can customize these settings to your exact requirements without delaying your order.
BW Clip Standard Features:
- Maintenance-free: no sensor or battery changes necessary
- Compact, lightweight design with one-button operation
- Designed for a range of harsh environments and extreme temperatures
- Automated self-test of battery, sensor and electronics
- Wide-angle flash, which alerts simultaneously with audible and vibrating alarm
- Automatic logging of the 35 most recent gas events and bump test results
- IP 66/67 — can be submerged up to 1 meter
- Default Alarm Setpoints: 5–10 ppm
- Alarm Setpoints Range: 2–20 ppm
- Measuring Range: 0–100 ppm
- Affordable, with low cost of ownership
Unit Includes:
- Detector complete with specified sensor, stainless steel alligator clip and concussion-proof housing
- Calibration/test cap and hose
- Manual
Configurable Options with IntelliDoX Management System:
- Configuration of high and low alarm set points before the device is activated
- Adjustment of alarm set points and other parameters as needed throughout the lifespan
- Non-compliance chirp indicator
- Configuration without activation
- Option to enable the noncompliance indicator, which flashes red when a bump test is due or a gas event occurs
- Option to display gas reading during alarm
- User settable bump test reminder
- 7–8 sec bump test with no more than 1 minute purge
- Option to display the Real Time Clock
Advanced Technology for Safety Compliance and Productivity:
- Unique dual reservoir sensor design dramatically improves instrument performance, response time, and longevity compared to traditional electrochemical sensors
- Reflex Technology advanced automated self-test function routinely checks the operating condition of the sensor to increase safety, uptime, and overall worker confidence
BW Clip Specifications:
- Weight: 0.6 lbs.
- Temperature: -40 to 122°F
- Humidity: 5–95% RH (non-condensing)
- Alarms: Visual, vibrating, and audible
- Typical Battery Life: Two years
Regulatory Note: The OSHA PEL for sulfur dioxide is 5 ppm (29 CFR 1910.1000, Table Z-1). The BWC2-S default low alarm of 5 ppm corresponds to the OSHA PEL, making it appropriate for operations where the regulatory threshold is the primary alarm trigger. Employers must also comply with 29 CFR 1910.146 for confined space atmospheric testing and monitoring.
Please Note: MM and DD denote the number of months and days left before the gas monitor expires. This monitor does not have a digital display of the gas concentration. Once activated, these units cannot be shut down and will continue to run for their two-year life span, prohibiting these items from being shipped because the alarm may be activated during transit. Additionally, these items are unable to be resold after activation.
Part Number:
BWC2-S 2 Year SO2 5-10
PK Safety services BW Technologies by Honeywell gas monitors in-house with factory-trained technicians. For help selecting the right part or to schedule calibration and repair, call 800.829.9580 or contact us online.
Related Searches
Bestselling Products, Bw Technologies By Honeywell, Gas Detection, Limited Time Offers, Portable Gas Monitors And Detectors, Single-Gas Monitors
Frequently Asked Questions
What is the SO2 OSHA PEL and how does the BWC2-S align with it?
The OSHA PEL for sulfur dioxide is 5 ppm (8-hour TWA, 29 CFR 1910.1000, Table Z-1). The BWC2-S default low alarm at 5 ppm aligns directly with the OSHA PEL, alerting workers immediately when the regulatory threshold is reached. The high alarm at 10 ppm provides a secondary IDLH-approach warning. Contact PK Safety at 800.829.9580 if you need custom setpoints for your operation.
How does the BWC2-S compare to the BWC2-S24?
The BWC2-S24 has default alarm setpoints of 2 ppm (low) and 4 ppm (high) for earlier warning in environments with stricter SO2 exposure policies. The BWC2-S alarms at 5 ppm (low) and 10 ppm (high), matching the OSHA PEL. Both models share the same maintenance-free 2-year lifespan, IP 66/67 rating, and 0–100 ppm measuring range.
Does the BWC2-S need calibration or sensor replacement?
No. The BWC2-S is maintenance-free for its full two-year lifespan. Reflex Technology automated self-tests continuously verify sensor and battery condition. No calibration, sensor, or battery service is required. A calibration/test cap and hose are included for bump testing to confirm alarm response before each use.
Can I configure alarm setpoints on the BWC2-S?
Yes. Using the BW IntelliDoX DX-CLIP docking station, alarm setpoints can be configured within the range of 2 ppm to 20 ppm. PK Safety's technicians can also pre-configure setpoints before shipment. Call 800.829.9580 or visit our BW Calibration Service page.
Is the BWC2-S compatible with the Hibernation Case?
Yes. The BW Clip Hibernation Case CLIPHB-CASE is compatible with the BWC2-S. Storing the monitor in the hibernation case when idle for a week or more pauses the device clock, extending usable life by up to 12 additional months beyond the two-year standard.
What industries use the BW Clip BWC2-S SO2 monitor?
The BWC2-S SO2 monitor is commonly used in pulp and paper mills, power plants (combustion SO2 emissions), metal smelting and refining, chemical plants, refineries, wastewater treatment, and food processing (refrigeration SO2 leak detection). Its maintenance-free design is especially valued in operations with large worker populations that require regular monitor rotation.
Specifications
Specifications
-
Type
-
Gas Type
-
Color
-
Product Weight (lbs.)
-
Height (in.)
-
Length (in.)
-
Width (in.)
-
Country of Origin
Reviews
Reviews
Keep your team protected & compliant!
- Expert guidance tailored to your specific needs
- Access responsive customer support when you need it
- Enjoy fast shipping directly to your location
- Benefit from extensive industry knowledge—75+ years of experience
- In-house gas detection calibration & repair services available
