Why Do Winter Months Hold Highest Risk for Carbon Monoxide Poisoning?
As a colorless, odorless gas, carbon monoxide is known as the “silent killer.” Exposure to high levels of carbon monoxide can lead to a range of health effects and illnesses,...
-
Silica Dust Rules and Regulations
Working in manufacturing or construction industries means being exposed to a number of respiratory hazards, including silica dust. Respirable crystalline silica is commonly found in these job sites as a...
-
3-Year Warranty Gas Monitor Comparison
One of the most important factors to consider when choosing a gas detector for your business is the length and scope of the gas detector warranty. Substantial instrument and sensor...
-
What’s the Difference Between a Welding Hood and Helmet?
Welding work presents a lot of hazards. Workers need to keep their eyes, face, and skin protected against infrared light, ultraviolet light, debris, sparks, and intense heat from reaching their...
-
What Changes are Coming to the Self Retracting Device Standard (SRL/ANSI)?
The Self-Retracting Devices (SRDs) Standard has been revised. The new standard is set to go into effect on August 01, 2022, but employers should start preparing for the new ANSI/ASSP Z359.14...
-
How to Safely Remove Mold
Mold is much easier to control ahead of time than to remove. However, once mold takes up residence in a building, you’ll need mold remediation to remove it and repair...
-
Things to Consider when Selecting an Auto-Darkening Welding Helmet
From the high heat to the flying sparks to the bright flashes of UV, welding safety gear and PPE is essential for a lot of construction jobs that need to...
-
What to Look for When Inspecting a Harness
Before using your fall protection equipment, you need to inspect it for deficiencies. Even small amounts of damage can affect your protection in a big way. Damaged or defective gear...
-
Watch Out for These High-Wind Dangers When Working in a Construction Site
You can never underestimate the power of the wind when working on a construction site. Strong winds can occur anytime, especially during the winter, but they are more than a...
-
How Do You Properly Dispose of Your Multi-Gas Monitor?
Your multi-gas detector works hard to keep you safe. Unfortunately, all good things come to an end, including this vital device. Towards the end of a multi-gas monitor’s life, servicing...
-
Watch Out for These Common Cold-Weather Safety Hazards
Some jobs don’t stop when the weather gets bad—some jobs will even ramp up when the cold weather blows in. To those of you that are out working hard while...
-
Basic Safety Measures When Working With Suspended Scaffolding
The construction industry is one of the biggest in any country. One of the many responsibilities of an employer is to look after the safety and wellbeing of their employees....
-
What is Required for a Proper Lockout Tagout Program?
You wouldn’t work on the underside of a car without making sure that the engine isn’t going to start or it’s securely on a jack. Why would you trust machinery...
-
What Are the Risks of Leading and Sharp Edge Situations In Fall Protection?
Being far above the ground is a hazard all on its own, but it’s not the only hazard that comes with elevated work. Sharp and leading edges are some of...
