Allegro Industries Metal Venturi Blowers 9518

Compressed air or saturated steam is the power source for our Venturi Blower line. Small volumes of high velocity air (from the compressed air source) run through the casting and out the nozzle jets, creating a venturi action or pulling action that creates large volumes of air through the venturi and out the air diffuser. A 1/2 in. hose with a crows foot connection is recommended from your air supply source to the side inlet connection. The compressor size required can be determined by checking the chart on air consumed at various inlet pressures. Operate this Venturi Blower on air or steam lines limited to 140 psi.

Key Features:

• Lightweight construction
• Single piece cast aluminum inlet housing
• Convenient carry handles for one-person portability to any location
• No guards required
• Multiple inlet ports
• Sturdy steel galvanized steel diffuser
• All models include a crow's foot inlet connection
• Static ground is attached to the base of all blowers
• Single piece cast aluminum inlet housing

Total Air Flow Specifications:

• 16.75 in. - 815 - 1182 CFM
• 30.50 in. - 1017 - 1482 CFM
• 44.25 in. - 2385 - 2885 CFM
• 46.06 in. - 3152 - 4152

Total Weight: 9518-03S - 5.5 lbs. 9518-03 - 8.5 lbs. 9518-06 - 22.3 lbs. 9518-08 - 36.0 lbs.

Part Numbers:
9518-03S - Low Profile Metal Venturi Blower - 16.75 in.
9518-03 - Small Metal Venturi Blower - 30.50 in.
9518-06 - Medium Metal Venturi Blower - 44.25 in.
9518-08 - Large Metal Venturi Blower - 46.06 in.

Related Searches
Allegro Safety, Confined Space, Safety Equipment, Ventilation