The Protecta 'PRO' 1340180 Shock Absorbing ÛÏYÛ Lanyard is designed to enable 100 percent tie-off. The lanyard consists of two 1-3/4 in. web leg sections with each having 2-1/4 in. capacity double-locking snap hooks attached. The user attaches one leg to an anchor point and moves until an obstacle is encountered, secures the second leg to the other side of the obstacle, releases the first leg, and proceeds. The shock absorber will activate when a force of approximately 675 lbs. is applied, and will continue as long as the force of fall arrest meets or exceeds this value. Max. extended length is 42 in. If the unit becomes fully extended, a polyester strap is incorporated into the device to act as a 100 percent back-up strap.
- Web: 1.75 in. polyester. Minimum tensile strength greater than 5,000 lbs.
- Hooks: AJ523A - Zinc plated stamped steel, AJ595A - Forged steel
- Net Weight 3.74 lbs.
- Compliance - Meets or exceeds OSHA 1926 & ANSI Z359.1-1998 performance criteria
If the 2-1/4 in. opening rebar hooks are overkill, we have the standard Capital Safety FIRST 100 percent Tie-off Lanyard with 3/4 in. opening hooks. And less money at that.
- 5.00 LBS
- 10.00 (in)
- 8.00 (in)
- 13.50 (in)
- Webbing Material:
- Polyester (Standard)
- Safety Standard:
- OSHA 1926 & ANSI Z359.1-1998
- 100% Tie Off: