This kit gives you everything you need, including Tyvek suits, and a half mask respirator, granting you the confidence to tackle any dirty, dangerous or hazardous job or home improvement project you've been putting off. The pros wear an asbestos mask when removing asbestos and lead paint from old homes and buildings. It is also a great kit for construction demolition, lath and plaster removal, painting, grinding off bottom paint from boats or working in contaminated or questionable environments such as attics, crawlspaces, and basements.
This is an extremely incredible value! Our Lead and Asbestos Removal Pro Kit includes your choice of one of our most popular half mask respirators:
This maintenance-free, reusable respirator from 3M is the basic face piece we recommend when starting to build a complete mask. The lightweight design is comfortable for long periods of wear, while the adjustable cradle suspension holds the respirator in place for maximum fit and comfort. Like the other 3M filter masks we sell, no extra parts or tools are needed to attach filters or cartridges to the face piece. Filters are attached with a simple 1/4 turn onto a bayonet-style fitting.
3M's best half mask respirator is well worth the price because the face piece, made of soft silicone rubber, is more comfortable and conforms to the face much better than less expensive masks. This means that the mask can be worn comfortably for longer periods of time and can be used for many projects.
In addition to your choice of half mask respirators, the kit includes:
1 pair 3M 2091 P100 (HEPA) filters These P100 (HEPA) filters are among our most popular products. HEPA filtration is rated to remove 99.9 percent of particles .3 microns and larger. These protect against asbestos and lead dusts in particular, as well as other dusts, allergens, and fumes. These flexible filters are extremely light and attach to all 3M masks with a simple 1/4 turn onto a bayonet-style fitting, requiring no tools.
1 DuPont Tyvek 400 Disposable Coverall with attached Hood and Boots This zippered one-piece disposable hazmat suit, with attached hood and booties, is our most popular protective suit for professionals and do-it-yourselfers. This suit is suitable for paint spraying, mold treatment, and lead or asbestos abatement. These suits can breathe so they don't get too hot but prevent dangerous particles down to 1 micron in size from penetrating the coverall.
1 pair MCR Safety 9688 Flex Tuff II Gloves These gloves are comprised of a breathable 10-gauge gray cotton/polyester knit shell coated with a gray latex dip to provide a rough finish for superior grip and wear. These dirt-resistant gray gloves are formed in the shape of a relaxed hand to reduce fatigue and enhance worker comfort.
Your choice of one of the following eye protection pieces is also included:
Pyramex G204 Goggles These economical chemical splash goggles contain indirect vents to restrict liquids from entering the eye. If your work takes you outdoors these goggles provide 99% protection from UV-A and UV-B rays.
Pyramex G704T Goggles These quality chemical splash goggles fill the gap between the inexpensive lab goggles you used in high school chemistry class and more expensive goggles worn for skiing. These feature a low-profile, modern design with an anti-glare soft PVC frame.
- 2.00 LBS
- 10.00 (in)
- 8.00 (in)
- 13.50 (in)
- Remove Free Shipping:
- Orders with this item are Not eligible free shipping
Everything was great quality and upgrading on eyewear was worth it.
80 moldy windows to re-glaze, scrape, wire brush! Not a job a smart person would tackle. Filter mask fits comfortably, good seal, easy to breathe. Upgraded to better goggles - worked great. Very satisfied with products and customer support was outstanding!
The medium gloves were too big for me. My husband's fit him fine. The finger length was too long to get comfortable and I have long fingers. The masks were great. My mask was a bit snug and rubbed the bridge of my nose, but a size bigger would have been too big. Overall, it was really a great buy.
I had to purchase 3 of these suits to protect my sisters and me from the dangers of going through a house that hadn't been cleaned in decades. These suits were very easy to put on and were really tough. My job was the garage and I had to deal with a lot of rough surfaces. The suits held up great. The filters on the masks popped off once when I hit it on something but popped back on easily. The suits were very comfortable. I am 5' 8'' and my sister is 5' 4'' and a medium fit both of us perfectly. Follow directions for fitting the masks and it will work great. (There are two places to pull and tighten) I highly recommend!
I bought 2 and use one for demo work of an old house that has old style plaster lath and the dust gets all over, but the suit blocks it out perfectly . I use the other one for spraying Round up at a ranch, it stays cool in the sun and keeps the sticker seeds the weeds have from sticking.
I had to remove two layers of very old insulation from a craw space. On my first try the air was full of fine particles and I had to stop. My brother works in the industry and I sent him the link to this kit. He said it is perfect.
It was easy to breath through the respirator and I never felt claustrophobic. The goggles remained clear and the gloves are very thick and strong.
The most important thing with this kind of remediation is to keep the insulation soaked and wet to minimize the airborne particles. That's where the Tyvek suit was a great help as I had to continually spray water above and the full suit helped me stay dry. The suit stayed intact and I just hosed it down to use again. I have an old shed to clean out which has a lot of mouse droppings and I'll use the rig for that too.
The Asbestos removal pro kit was exactly what I needed and the cost was right. I purchased the upgraded mask and goggles, and I would highly recommend that. Also purchased an extra filter because the one that was used for asbestos was discarded after use. Now the mask and goggles are available for my next dusty job. I am 5' 9" and 170 lbs. Purchased the medium respirator medium gloves and large coveralls. They were perfect size. Respirator was VERY comfortable. I wore it for 4 hours without removing it a single time and was surprised that it was so comfortable. They offers the products service and price that are representative of a great company. I will do business with them again.
Great Kit...everything included! Worked well...I had a sewer line backup into the basement! I wanted Protection and received Great Protection.The only thing that could be better is If someone else had to clean up the mess! HA
You can't beat the price of this package. And it's all quality stuff. The suit exceeded my expectations -- only a few tears here and there after a full day of crawling/rolling around on the rough concrete floor of my crawlspace. Gloves exceeded my expectations as well. Respirator worked well and fit my face; but I would suggest going to the next size if you have any hesitation whatsoever over the correct size. Goggles were not so great, I would go w/ the safety glasses next time.