DBI-SALA Nano-Lok 6 ft. SRL with Flat Steel Rebar Hooks 3101288

No reviews yet Write a Review
Usually ships in 1 - 2 days
(You save $75.28 )

Frequently Bought Together

SRLs have taken a big step forward with the release of the lightweight, compact, and inexpensive Nano-Lok series from DBI-SALA. The 3101288 Nano-Lok configuration features steel rebar hooks with 2-1/2 in. gate opening which make 100 percent tie-off quick and convenient. This Nano-Lok connects to your harness with DBI-SALA's Quick Connector which attaches under the dorsal D-ring. This harness connector is specifically designed for harnesses with "fixed" or sewn-in-place dorsal D-rings that typically don't have much room to slide a connector under the webbing straps. Hooking below the D-ring keeps the unit further down on the worker's back and the housings away from bumping into your hardhat. In the past, SRLs were cost-prohibitive, so even though they were better than the typical shock-absorbing lanyard for fall protection, most users couldn't afford them. That's all changed with Nano-Lok, the first truly affordable self-retracting lifeline of its kind. They can be used in place of lanyards and directly attach to almost any harness. Nano-Lok will stop a fall after only 24 in., while traditional shock-absorbing lanyards need 18 ft. of fall clearance. Because the Nano-Loks 6-ft. line is housed in thermoplastic and has constant tension, it stays out of your way, helping to prevent snags and trip falls. The 420-lb. capacity is the highest in the industry, providing greater tool-carrying options. The Nano-Lok is also versatile, with more than 30 different configurations to suit almost any at-heights need. It doesn't matter if you're working in construction, oil and gas site maintenance, tower climbing, confined spaces, or any other area where a fall-arrest system is needed, Nano-Lok has you covered. Nano-Loks aren't only affordable and lightweight, they're also safe, meeting or exceeding OSHA 1926.502, 1910.66; ANSI Z359-2007 & A10.32 industry standards.

Instruction Manual:

Product Weight: 6.26 lbs.

Product Number:

Additional Details:

6.26 LBS
10.00 (in)
8.00 (in)
13.50 (in)
Calculated at Checkout
Weight Capacity:
420 Pounds
Safety Standard:
OSHA 1926.502, 1910.66; ANSI Z359-2007 & A10.32
100% Tie Off:
Country of Origin:
United States